linux-stable.git/drivers, branch v4.9.83

media: r820t: fix r820t_write_reg for KASAN

2018-02-22T14:43:56+00:00

commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.

With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:

drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715

Signed-off-by: Arnd Bergmann 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2018-02-22T14:43:55+00:00

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang 
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

PM / devfreq: Propagate error from devfreq_add_device()

2018-02-22T14:43:52+00:00

commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.

Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.

Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: stable@vger.kernel.org
Acked-by: Chanwoo Choi 
Signed-off-by: Bjorn Andersson 
Signed-off-by: MyungJoo Ham 
Signed-off-by: Greg Kroah-Hartman

cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin

2018-02-22T14:43:52+00:00

commit 3fa4680b860bf48b437d6a2c039789c4abe202ae upstream.

Some OpenPOWER boxes can have same pstate values for nominal and
pmin pstates. In these boxes the current code will not initialize
'powernv_pstate_info.min' variable and result in erroneous CPU
frequency reporting. This patch fixes this problem.

Fixes: 09ca4c9b5958 (cpufreq: powernv: Replacing pstate_id with frequency table index)
Reported-by: Alvin Wang 
Signed-off-by: Shilpasri G Bhat 
Acked-by: Viresh Kumar 
Cc: 4.8+  # 4.8+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

RDMA/rxe: Fix a race condition related to the QP error state

2018-02-22T14:43:52+00:00

commit 6f301e06de4cf9ab7303f5acd43e64fcd4aa04be upstream.

The following sequence:
* Change queue pair state into IB_QPS_ERR.
* Post a work request on the queue pair.

Triggers the following race condition in the rdma_rxe driver:
* rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function
  that examines the QP send queue.
* rxe_post_send() posts a work request on the QP send queue.

If rxe_completer() runs prior to rxe_post_send(), it will drain the send
queue and the driver will assume no further action is necessary.
However, once we post the send to the send queue, because the queue is
in error, no send completion will ever happen and the send will get
stuck.  In order to process the send, we need to make sure that
rxe_completer() gets run after a send is posted to a queue pair in an
error state.  This patch ensures that happens.

Signed-off-by: Bart Van Assche 
Cc: Moni Shoua 
Cc:  # v4.8
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports

2018-02-22T14:43:51+00:00

commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.

Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.

As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.

When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:

 mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0

Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).

Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

IB/qib: Fix comparison error with qperf compare/swap test

2018-02-22T14:43:51+00:00

commit 87b3524cb5058fdc7c2afdb92bdb2e079661ddc4 upstream.

This failure exists with qib:

ver_rc_compare_swap:
mismatch, sequence 2, expected 123456789abcdef, got 0

The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.

Fix by using the appropriate inlines to create the request.

Fixes: 261a4351844b ("IB/qib,IB/hfi: Use core common header file")
Reviewed-by: Michael J. Ruhl 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

dm: correctly handle chained bios in dec_pending()

2018-02-22T14:43:51+00:00

commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream.

dec_pending() is given an error status (possibly 0) to be recorded
against a bio.  It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status.  However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.

This can happen when chained bios are in use.  If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.

This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.

A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.

The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.

Reported-and-tested-by: Milan Broz 
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT

2018-02-22T14:43:51+00:00

commit ec897569ad7dbc6d595873a487c3fac23f463f76 upstream.

Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and
USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is
conditional upon USB && USB_SUPPORT, so that it can be freely selected
by platform Kconfig symbols in architecture code.

For example once the MIPS_GENERIC platform selects are fixed in commit
2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS
32r6_defconfig warns like so:

warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB)
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB)

Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN")
Signed-off-by: James Hogan 
Cc: Corentin Labbe 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: linux-usb@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Greg Kroah-Hartman 
Patchwork: https://patchwork.linux-mips.org/patch/18559/
Signed-off-by: Greg Kroah-Hartman

mvpp2: fix multicast address filter

2018-02-22T14:43:51+00:00

commit 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 upstream.

IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken
multicast address filter in the mvpp2 driver.

The driver loads doesn't load any multicast entries if "allmulti" is not
set. This condition should be reversed.

The condition !netdev_mc_empty(dev) is useless (because
netdev_for_each_mc_addr is nop if the list is empty).

This patch also fixes a possible overflow of the multicast list - if
mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman