linux-stable.git/drivers, branch v4.9.77 Linux kernel stable tree x86/retpoline/hyperv: Convert assembler indirect jumps 2018-01-17T08:38:59+00:00 David Woodhouse dwmw@amazon.co.uk 2018-01-11T21:46:30+00:00 9e37da4c3de1b6cca215a8515491de75360022ba commit e70e5892b28c18f517f29ab6e83bd57705104b31 upstream. Convert all indirect jumps in hyperv inline asm code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk [ backport to 4.9, hopefully correct, not tested... - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e70e5892b28c18f517f29ab6e83bd57705104b31 upstream.

Convert all indirect jumps in hyperv inline asm code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk
[ backport to 4.9, hopefully correct, not tested... - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs/cpu: Add vulnerability folder 2018-01-17T08:38:57+00:00 Thomas Gleixner tglx@linutronix.de 2018-01-07T21:48:00+00:00 11ec2df9c02071a7c0a63a1febb53e76cdee56ac commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream. As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream.

As the meltdown/spectre problem affects several CPU architectures, it makes
sense to have common way to express whether a system is affected by a
particular vulnerability or not. If affected the way to express the
mitigation should be common as well.

Create /sys/devices/system/cpu/vulnerabilities folder and files for
meltdown, spectre_v1 and spectre_v2.

Allow architectures to override the show function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e1000e: Fix e1000_check_for_copper_link_ich8lan return value. 2018-01-17T08:38:56+00:00 Benjamin Poirier bpoirier@suse.com 2017-12-11T07:26:40+00:00 d598347989aa8873cebfd7d7b4d29d7aba21b878 commit 4110e02eb45ea447ec6f5459c9934de0a273fb91 upstream. e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by: Christian Hesse <list@eworm.de> Reported-by: Gabriel C <nix.or.die@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Christian Hesse <list@eworm.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4110e02eb45ea447ec6f5459c9934de0a273fb91 upstream.

e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
are the two functions that may be assigned to mac.ops.check_for_link when
phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e:
Separate signaling for link check/link up") changed the meaning of the
return value of check_for_link for copper media but only adjusted the first
function. This patch adjusts the second function likewise.

Reported-by: Christian Hesse <list@eworm.de>
Reported-by: Gabriel C <nix.or.die@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047
Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Christian Hesse <list@eworm.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uas: ignore UAS for Norelsys NS1068(X) chips 2018-01-17T08:38:56+00:00 Icenowy Zheng icenowy@aosc.io 2018-01-05T16:56:44+00:00 3ba5d3a2cf40c4ebdc1f702af3b5dea405a6a11e commit 928afc85270753657b5543e052cc270c279a3fe9 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 928afc85270753657b5543e052cc270c279a3fe9 upstream.

The UAS mode of Norelsys NS1068(X) is reported to fail to work on
several platforms with the following error message:

xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8
xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001

And when trying to mount a partition on the disk the disk will
disconnect from the USB controller, then after re-connecting the device
will be offlined and not working at all.

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl 2018-01-17T08:38:56+00:00 Viktor Slavkovic viktors@google.com 2018-01-08T18:43:03+00:00 c51d23dffc2e9ca05d611c86c440f9055541c62d commit 443064cb0b1fb4569fe0a71209da7625129fb760 upstream. A lock-unlock is missing in ASHMEM_SET_SIZE ioctl which can result in a race condition when mmap is called. After the !asma->file check, before setting asma->size, asma->file can be set in mmap. That would result in having different asma->size than the mapped memory size. Combined with ASHMEM_UNPIN ioctl and shrinker invocation, this can result in memory corruption. Signed-off-by: Viktor Slavkovic <viktors@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 443064cb0b1fb4569fe0a71209da7625129fb760 upstream.

A lock-unlock is missing in ASHMEM_SET_SIZE ioctl which can result in a
race condition when mmap is called. After the !asma->file check, before
setting asma->size, asma->file can be set in mmap. That would result in
having different asma->size than the mapped memory size. Combined with
ASHMEM_UNPIN ioctl and shrinker invocation, this can result in memory
corruption.

Signed-off-by: Viktor Slavkovic <viktors@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer 2018-01-17T08:38:56+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T02:23:47+00:00 8ab8c6e6607a14ebd54319535b17e384d2872df9 commit 5fd77a3a0e408c23ab4002a57db980e46bc16e72 upstream. v_send_ret_submit() handles urb with a null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5fd77a3a0e408c23ab4002a57db980e46bc16e72 upstream.

v_send_ret_submit() handles urb with a null transfer_buffer, when it
replays a packet with potential malicious data that could contain a
null buffer.

Add a check for the condition when actual_length > 0 and transfer_buffer
is null.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input 2018-01-17T08:38:56+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T02:23:46+00:00 86c8d58fc7538d0f44367f49d24568e925049c0d commit b78d830f0049ef1966dc1e0ebd1ec2a594e2cf25 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b78d830f0049ef1966dc1e0ebd1ec2a594e2cf25 upstream.

Harden CMD_SUBMIT path to handle malicious input that could trigger
large memory allocations. Add checks to validate transfer_buffer_length
and number_of_packets to protect against bad input requesting for
unbounded memory allocations.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: remove kernel addresses from usb device and urb debug msgs 2018-01-17T08:38:55+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T00:00:06+00:00 6851ec74bfe44e8aa568fd00603759c4a2918752 commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream. usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream.

usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses.
Remove kernel addresses from usb device and urb debug msgs and improve
the message content.

Instead of printing parent device and bus addresses, print parent device
and bus names.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix usbmon BUG trigger 2018-01-17T08:38:55+00:00 Pete Zaitcev zaitcev@redhat.com 2018-01-08T21:46:41+00:00 435db24bb91f7dd16940d8ddedc3b5ca75547fb5 commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream. Automated tests triggered this by opening usbmon and accessing the mmap while simultaneously resizing the buffers. This bug was with us since 2006, because typically applications only size the buffers once and thus avoid racing. Reported by Kirill A. Shutemov. Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream.

Automated tests triggered this by opening usbmon and accessing the
mmap while simultaneously resizing the buffers. This bug was with
us since 2006, because typically applications only size the buffers
once and thus avoid racing. Reported by Kirill A. Shutemov.

Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: usb3503: make sure reset is low for at least 100us 2018-01-17T08:38:55+00:00 Stefan Agner stefan@agner.ch 2018-01-11T13:47:40+00:00 9f6ca0ea7a7a21963e73d69be42026e5c5954bc4 commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream. When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream.

When using a GPIO which is high by default, and initialize the
driver in USB Hub mode, initialization fails with:
  [  111.757794] usb3503 0-0008: SP_ILOCK failed (-5)

The reason seems to be that the chip is not properly reset.
Probe does initialize reset low, however some lines later the
code already set it back high, which is not long enouth.

Make sure reset is asserted for at least 100us by inserting a
delay after initializing the reset pin during probe.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>