linux-stable.git/drivers, branch v4.9.336

net: mvneta: Fix an out of bounds check

2022-12-14T10:24:35+00:00

[ Upstream commit cdd97383e19d4afe29adc3376025a15ae3bab3a3 ]

In an earlier commit, I added a bounds check to prevent an out of bounds
read and a WARN().  On further discussion and consideration that check
was probably too aggressive.  Instead of returning -EINVAL, a better fix
would be to just prevent the out of bounds read but continue the process.

Background: The value of "pp->rxq_def" is a number between 0-7 by default,
or even higher depending on the value of "rxq_number", which is a module
parameter. If the value is more than the number of available CPUs then
it will trigger the WARN() in cpu_max_bits_warn().

Fixes: e8b4fc13900b ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()")
Signed-off-by: Dan Carpenter 
Reviewed-by: Leon Romanovsky 
Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadam
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()

2022-12-14T10:24:35+00:00

[ Upstream commit 7d8c19bfc8ff3f78e5337107ca9246327fcb6b45 ]

It is not allowed to call kfree_skb() or consume_skb() from
hardware interrupt context or with interrupts being disabled.
So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq()
and dev_consume_skb_irq() under spin_lock_irq().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

xen/netback: fix build warning

2022-12-14T10:24:35+00:00

[ Upstream commit 7dfa764e0223a324366a2a1fc056d4d9d4e95491 ]

Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in
the non-linear area") introduced a (valid) build warning. There have
even been reports of this problem breaking networking of Xen guests.

Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross 
Reviewed-by: Jan Beulich 
Reviewed-by: Ross Lagerwall 
Tested-by: Jason Andryuk 
Signed-off-by: Juergen Gross 
Signed-off-by: Sasha Levin

ethernet: aeroflex: fix potential skb leak in greth_init_rings()

2022-12-14T10:24:35+00:00

[ Upstream commit 063a932b64db3317ec020c94466fe52923a15f60 ]

The greth_init_rings() function won't free the newly allocated skb when
dma_mapping_error() returns error, so add dev_kfree_skb() to fix it.

Compile tested only.

Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Zhang Changzhong 
Reviewed-by: Leon Romanovsky 
Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: hisilicon: Fix potential use-after-free in hix5hd2_rx()

2022-12-14T10:24:34+00:00

[ Upstream commit 433c07a13f59856e4585e89e86b7d4cc59348fab ]

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Liu Jian 
Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: hisilicon: Fix potential use-after-free in hisi_femac_rx()

2022-12-14T10:24:34+00:00

[ Upstream commit 4640177049549de1a43e9bc49265f0cdfce08cfd ]

The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.

Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian 
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: mvneta: Prevent out of bounds read in mvneta_config_rss()

2022-12-14T10:24:34+00:00

[ Upstream commit e8b4fc13900b8e8be48debffd0dfd391772501f7 ]

The pp->indir[0] value comes from the user.  It is passed to:

	if (cpu_online(pp->rxq_def))

inside the mvneta_percpu_elect() function.  It needs bounds checkeding
to ensure that it is not beyond the end of the cpu bitmap.

Fixes: cad5d847a093 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect")
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: encx24j600: Fix invalid logic in reading of MISTAT register

2022-12-14T10:24:34+00:00

[ Upstream commit 25f427ac7b8d89b0259f86c0c6407b329df742b2 ]

A loop for reading MISTAT register continues while regmap_read() fails
and (mistat & BUSY), but if regmap_read() fails a value of mistat is
undefined.

The patch proposes to check for BUSY flag only when regmap_read()
succeed. Compile test only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko 
Reviewed-by: Pavan Chebbi 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: encx24j600: Add parentheses to fix precedence

2022-12-14T10:24:34+00:00

[ Upstream commit 167b3f2dcc62c271f3555b33df17e361bb1fa0ee ]

In functions regmap_encx24j600_phy_reg_read() and
regmap_encx24j600_phy_reg_write() in the conditions of the waiting
cycles for filling the variable 'ret' it is necessary to add parentheses
to prevent wrong assignment due to logical operations precedence.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d70e53262f5c ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko 
Reviewed-by: Pavan Chebbi 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

igb: Allocate MSI-X vector when testing

2022-12-14T10:24:33+00:00

[ Upstream commit 28e96556baca7056d11d9fb3cdd0aba4483e00d8 ]

Without this change, the interrupt test fail with MSI-X environment:

$ sudo ethtool -t enp0s2 offline
[   43.921783] igb 0000:00:02.0: offline testing starting
[   44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down
[   44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   51.272202] igb 0000:00:02.0: testing shared interrupt
[   56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is FAIL
The test extra info:
Register test  (offline)	 0
Eeprom test    (offline)	 0
Interrupt test (offline)	 4
Loopback test  (offline)	 0
Link test   (on/offline)	 0

Here, "4" means an expected interrupt was not delivered.

To fix this, route IRQs correctly to the first MSI-X vector by setting
IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be
masked. The interrupt test now runs properly with this change:

$ sudo ethtool -t enp0s2 offline
[   42.762985] igb 0000:00:02.0: offline testing starting
[   50.141967] igb 0000:00:02.0: testing shared interrupt
[   56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is PASS
The test extra info:
Register test  (offline)	 0
Eeprom test    (offline)	 0
Interrupt test (offline)	 0
Loopback test  (offline)	 0
Link test   (on/offline)	 0

Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test")
Signed-off-by: Akihiko Odaki 
Reviewed-by: Maciej Fijalkowski 
Tested-by: Gurucharan G  (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen 
Signed-off-by: Sasha Levin