linux-stable.git/drivers, branch v4.9.314

mmc: rtsx: add 74 Clocks in power on flow

2022-05-15T17:39:17+00:00

commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream.

SD spec definition:
"Host provides at least 74 Clocks before issuing first command"
After 1ms for the voltage stable then start issuing the Clock signals

if POWER STATE is
MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card
MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card

Signed-off-by: Ricky Wu 
Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Ricky Wu 
Signed-off-by: Ulf Hansson 
Signed-off-by: Christian Loehle 
Signed-off-by: Greg Kroah-Hartman

can: grcan: only use the NAPI poll budget for RX

2022-05-15T17:39:17+00:00

commit 2873d4d52f7c52d60b316ba6c47bd7122b5a9861 upstream.

The previous split budget between TX and RX made it return not using
the entire budget but at the same time not having calling called
napi_complete. This sometimes led to the poll to not be called, and at
the same time having TX and RX interrupts disabled resulting in the
driver getting stuck.

Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Larsson 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: grcan: grcan_probe(): fix broken system id check for errata workaround needs

2022-05-15T17:39:17+00:00

commit 1e93ed26acf03fe6c97c6d573a10178596aadd43 upstream.

The systemid property was checked for in the wrong place of the device
tree and compared to the wrong value.

Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Larsson 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit

2022-05-15T17:39:17+00:00

commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream.

Fixes the following W=1 kernel build warning(s):

 from drivers/block/drbd/drbd_nl.c:24:
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
 drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
 drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
 drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
 drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
 drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]

Cc: Philipp Reisner 
Cc: Lars Ellenberg 
Cc: Jens Axboe 
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe 
Cc: Nathan Chancellor 
Signed-off-by: Greg Kroah-Hartman

dm: interlock pending dm_io and dm_wait_for_bios_completion

2022-05-12T10:14:58+00:00

commit 9f6dc633761006f974701d4c88da71ab68670749 upstream.

Commit d208b89401e0 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.

When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.

Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.

Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka 
Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer 
Signed-off-by: Mikulas Patocka 
Reviewed-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm: fix mempool NULL pointer race when completing IO

2022-05-12T10:14:58+00:00

commit d208b89401e073de986dc891037c5a668f5d5d95 upstream.

dm_io_dec_pending() calls end_io_acct() first and will then dec md
in-flight pending count. But if a task is swapping DM table at same
time this can result in a crash due to mempool->elements being NULL:

task1                             task2
do_resume
 ->do_suspend
  ->dm_wait_for_completion
                                  bio_endio
				   ->clone_endio
				    ->dm_io_dec_pending
				     ->end_io_acct
				      ->wakeup task1
 ->dm_swap_table
  ->__bind
   ->__bind_mempools
    ->bioset_exit
     ->mempool_exit
                                     ->free_io

[ 67.330330] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
......
[ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 67.330510] pc : mempool_free+0x70/0xa0
[ 67.330515] lr : mempool_free+0x4c/0xa0
[ 67.330520] sp : ffffff8008013b20
[ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004
[ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8
[ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800
[ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800
[ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80
[ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c
[ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd
[ 67.330563] x15: 000000000093b41e x14: 0000000000000010
[ 67.330569] x13: 0000000000007f7a x12: 0000000034155555
[ 67.330574] x11: 0000000000000001 x10: 0000000000000001
[ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000
[ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a
[ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001
[ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8
[ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970
[ 67.330609] Call trace:
[ 67.330616] mempool_free+0x70/0xa0
[ 67.330627] bio_put+0xf8/0x110
[ 67.330638] dec_pending+0x13c/0x230
[ 67.330644] clone_endio+0x90/0x180
[ 67.330649] bio_endio+0x198/0x1b8
[ 67.330655] dec_pending+0x190/0x230
[ 67.330660] clone_endio+0x90/0x180
[ 67.330665] bio_endio+0x198/0x1b8
[ 67.330673] blk_update_request+0x214/0x428
[ 67.330683] scsi_end_request+0x2c/0x300
[ 67.330688] scsi_io_completion+0xa0/0x710
[ 67.330695] scsi_finish_command+0xd8/0x110
[ 67.330700] scsi_softirq_done+0x114/0x148
[ 67.330708] blk_done_softirq+0x74/0xd0
[ 67.330716] __do_softirq+0x18c/0x374
[ 67.330724] irq_exit+0xb4/0xb8
[ 67.330732] __handle_domain_irq+0x84/0xc0
[ 67.330737] gic_handle_irq+0x148/0x1b0
[ 67.330744] el1_irq+0xe8/0x190
[ 67.330753] lpm_cpuidle_enter+0x4f8/0x538
[ 67.330759] cpuidle_enter_state+0x1fc/0x398
[ 67.330764] cpuidle_enter+0x18/0x20
[ 67.330772] do_idle+0x1b4/0x290
[ 67.330778] cpu_startup_entry+0x20/0x28
[ 67.330786] secondary_start_kernel+0x160/0x170

Fix this by:
1) Establishing pointers to 'struct dm_io' members in
dm_io_dec_pending() so that they may be passed into end_io_acct()
_after_ free_io() is called.
2) Moving end_io_acct() after free_io().

Cc: stable@vger.kernel.org
Signed-off-by: Jiazi Li 
Signed-off-by: Mike Snitzer 
Signed-off-by: Mikulas Patocka 
Reviewed-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

smsc911x: allow using IRQ0

2022-05-12T10:14:57+00:00

commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream.

The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource.  This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...

When merging this to the stable kernels, make sure you also merge commit
e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...

Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: emaclite: Add error handling for of_address_to_resource()

2022-05-12T10:14:57+00:00

commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream.

check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.

Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: Shravya Kumbham 
Signed-off-by: Radhey Shyam Pandey 
Signed-off-by: Paolo Abeni 
Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7470) Fix warning on module removal

2022-05-12T10:14:57+00:00

commit 7b2666ce445c700b8dcee994da44ddcf050a0842 upstream.

When removing the adt7470 module, a warning might be printed:

do not call blocking ops when !TASK_RUNNING; state=1
set at [] adt7470_update_thread+0x7b/0x130 [adt7470]

This happens because adt7470_update_thread() can leave the kthread in
TASK_INTERRUPTIBLE state when the kthread is being stopped before
the call of set_current_state(). Since kthread_exit() might sleep in
exit_signals(), the warning is printed.
Fix that by using schedule_timeout_interruptible() and removing
the call of set_current_state().
This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop()
which might cause the kthread to exit.

Reported-by: Zheyu Ma 
Fixes: 93cacfd41f82 (hwmon: (adt7470) Allow faster removal)
Signed-off-by: Armin Wolf 
Tested-by: Zheyu Ma 
Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs

2022-05-12T10:14:57+00:00

commit d270453a0d9ec10bb8a802a142fb1b3601a83098 upstream.

There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.

There are three situations that could lead to double-free bugs.

The first situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |  nfcmrvl_nci_unregister_dev
 release_firmware()           |   nfcmrvl_fw_dnld_abort
  kfree(fw) //(1)             |    fw_dnld_over
                              |     release_firmware
  ...                         |      kfree(fw) //(2)
                              |     ...

The second situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |
 mod_timer                    |
 (wait a time)                |
 fw_dnld_timeout              |  nfcmrvl_nci_unregister_dev
   fw_dnld_over               |   nfcmrvl_fw_dnld_abort
    release_firmware          |    fw_dnld_over
     kfree(fw) //(1)          |     release_firmware
     ...                      |      kfree(fw) //(2)

The third situation is shown below:

       (Thread 1)               |       (Thread 2)
nfcmrvl_nci_recv_frame          |
 if(..->fw_download_in_progress)|
  nfcmrvl_fw_dnld_recv_frame    |
   queue_work                   |
                                |
fw_dnld_rx_work                 | nfcmrvl_nci_unregister_dev
 fw_dnld_over                   |  nfcmrvl_fw_dnld_abort
  release_firmware              |   fw_dnld_over
   kfree(fw) //(1)              |    release_firmware
                                |     kfree(fw) //(2)

The firmware struct is deallocated in position (1) and deallocated
in position (2) again.

The crash trace triggered by POC is like below:

BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
  kfree
  fw_dnld_over
  nfcmrvl_nci_unregister_dev
  nci_uart_tty_close
  tty_ldisc_kill
  tty_ldisc_hangup
  __tty_hangup.part.0
  tty_release
  ...

What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.

This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.

The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.

Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Signed-off-by: Duoming Zhou 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman