linux-stable.git/drivers, branch v4.9.31

drm/gma500/psb: Actually use VBT mode when it is found

2017-06-07T10:07:49+00:00

commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream.

With LVDS we were incorrectly picking the pre-programmed mode instead of
the prefered mode provided by VBT. Make sure we pick the VBT mode if
one is provided. It is likely that the mode read-out code is still wrong
but this patch fixes the immediate problem on most machines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562
Signed-off-by: Patrik Jakobsson 
Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman

RDMA/qib,hfi1: Fix MR reference count leak on write with immediate

2017-06-07T10:07:49+00:00

commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream.

The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory
reference when a buffer cannot be allocated for returning the immediate
data.

The issue is that the rkey validation has already occurred and the RNR
nak fails to release the reference that was fruitlessly gotten.  The
the peer will send the identical single packet request when its RNR
timer pops.

The fix is to release the held reference prior to the rnr nak exit.
This is the only sequence the requires both rkey validation and the
buffer allocation on the same packet.

Tested-by: Tadeusz Struk 
Reviewed-by: Dennis Dalessandro 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

pcmcia: remove left-over %Z format

2017-06-07T10:07:48+00:00

commit ff5a20169b98d84ad8d7f99f27c5ebbb008204d6 upstream.

Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some
usages of format %Z but forgot "%.2Zx".  This makes clang 4.0 reports a
-Wformat-extra-args warning because it does not know about %Z.

Replace %Z with %z.

Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Nicolas Iooss 
Cc: Harald Welte 
Cc: Alexey Dobriyan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl

2017-06-07T10:07:48+00:00

commit 51964e9e12d0a054002a1a0d1dec4f661c7aaf28 upstream.

vram_size is supposed to be the total amount of VRAM that can be used by
userspace, which corresponds to the TTM VRAM manager size (which is
normally the full amount of VRAM, but can be just the visible VRAM when
DMA can't be used for BO migration for some reason).

The above was incorrectly used for vram_visible before, resulting in
generally too large values being reported.

Reviewed-by: Christian König 
Reviewed-by: Nicolai Hähnle 
Reviewed-by: Alex Deucher 
Signed-off-by: Michel Dänzer 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Unbreak HPD handling for r600+

2017-06-07T10:07:48+00:00

commit 3d18e33735a02b1a90aecf14410bf3edbfd4d3dc upstream.

We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.

This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.

Reviewed-by: Christian König 
Signed-off-by: Lyude 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/radeon/ci: disable mclk switching for high refresh rates (v2)

2017-06-07T10:07:48+00:00

commit 58d7e3e427db1bd68f33025519a9468140280a75 upstream.

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Acked-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

scsi: mpt3sas: Force request partial completion alignment

2017-06-07T10:07:48+00:00

commit f2e767bb5d6ee0d988cb7d4e54b0b21175802b6b upstream.

The firmware or device, possibly under a heavy I/O load, can return on a
partial unaligned boundary. Scsi-ml expects these requests to be
completed on an alignment boundary. Scsi-ml blindly requeues the I/O
without checking the alignment boundary of the I/O request for the
remaining bytes. This leads to errors, since devices cannot perform
non-aligned read/write operations.

This patch fixes the issue in the driver. It aligns unaligned
completions of FS requests, by truncating them to the nearest alignment
boundary.

[mkp: simplified if statement]

Reported-by: Mauricio Faria De Oliveira 
Signed-off-by: Guilherme G. Piccoli 
Signed-off-by: Ram Pai 
Acked-by: Sreekanth Reddy 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nvme: avoid to use blk_mq_abort_requeue_list()

2017-06-07T10:07:48+00:00

commit 986f75c876dbafed98eba7cb516c5118f155db23 upstream.

NVMe may add request into requeue list simply and not kick off the
requeue if hw queues are stopped. Then blk_mq_abort_requeue_list()
is called in both nvme_kill_queues() and nvme_ns_remove() for
dealing with this issue.

Unfortunately blk_mq_abort_requeue_list() is absolutely a
race maker, for example, one request may be requeued during
the aborting. So this patch just calls blk_mq_kick_requeue_list() in
nvme_kill_queues() to handle this issue like what nvme_start_queues()
does. Now all requests in requeue list when queues are stopped will be
handled by blk_mq_kick_requeue_list() when queues are restarted, either
in nvme_start_queues() or in nvme_kill_queues().

Reported-by: Zhang Yi 
Reviewed-by: Keith Busch 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Ming Lei 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()

2017-06-07T10:07:48+00:00

commit 806f026f9b901eaf1a6baeb48b5da18d6a4f818e upstream.

Inside nvme_kill_queues(), we have to start hw queues for
draining requests in sw queues, .dispatch list and requeue list,
so use blk_mq_start_hw_queues() instead of blk_mq_start_stopped_hw_queues()
which only run queues if queues are stopped, but the queues may have
been started already, for example nvme_start_queues() is called in reset work
function.

blk_mq_start_hw_queues() run hw queues in current context, instead
of running asynchronously like before. Given nvme_kill_queues() is
run from either remove context or reset worker context, both are fine
to run hw queue directly. And the mutex of namespaces_mutex isn't a
problem too becasue nvme_start_freeze() runs hw queue in this way
already.

Reported-by: Zhang Yi 
Reviewed-by: Keith Busch 
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Ming Lei 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

nvme-rdma: support devices with queue size < 32

2017-06-07T10:07:48+00:00

commit 0544f5494a03b8846db74e02be5685d1f32b06c9 upstream.

In the case of small NVMe-oF queue size (<32) we may enter a deadlock
caused by the fact that the IB completions aren't sent waiting for 32
and the send queue will fill up.

The error is seen as (using mlx5):
[ 2048.693355] mlx5_0:mlx5_ib_post_send:3765:(pid 7273):
[ 2048.693360] nvme nvme1: nvme_rdma_post_send failed with error code -12

This patch changes the way the signaling is done so that it depends on
the queue depth now. The magic define has been removed completely.

Signed-off-by: Marta Rybczynska 
Signed-off-by: Samuel Jones 
Acked-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman