linux-stable.git/drivers, branch v4.9.3

usb: gadget: composite: always set ep->mult to a sensible value

2017-01-12T10:39:46+00:00

commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream.

ep->mult is supposed to be set to Isochronous and
Interrupt Endapoint's multiplier value. This value
is computed from different places depending on the
link speed.

If we're dealing with HighSpeed, then it's part of
bits [12:11] of wMaxPacketSize. This case wasn't
taken into consideration before.

While at that, also make sure the ep->mult defaults
to one so drivers can use it unconditionally and
assume they'll never multiply ep->maxpacket to zero.

Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

Revert "usb: gadget: composite: always set ep->mult to a sensible value"

2017-01-12T10:39:46+00:00

This reverts commit eab1c4e2d0ad4509ccb8476a604074547dc202e0 which is
commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream as it was
incorrectly backported.

Reported-by: Bin Liu 
Cc: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

Revert "rtlwifi: Fix enter/exit power_save"

2017-01-12T10:39:45+00:00

This reverts commit 98068574928f499b30f136ff57ef9a03cc575a36, which is
commit ba9f93f82abafe2552eac942ebb11c2df4f8dd7f upstream as it causes
problems.

Reported-by: Dmitry Osipenko 
Cc: Ping-Ke Shih 
Cc: Larry Finger 
Cc: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

tpm_tis: Check return values from get_burstcount.

2017-01-12T10:39:38+00:00

commit 26a137e31ffe6fbfdb008554a8d9b3d55bd5c86e upstream.

If the TPM we're connecting to uses a static burst count, it will report
a burst count of zero throughout the response read. However, get_burstcount
assumes that a response of zero indicates that the TPM is not ready to
receive more data. In this case, it returns a negative error code, which
is passed on to tpm_tis_{write,read}_bytes as a u16, causing
them to read/write far too many bytes.

This patch checks for negative return codes and bails out from recv_data
and tpm_tis_send_data.

Fixes: 1107d065fdf1 (tpm_tis: Introduce intermediate layer for TPM access)
Signed-off-by: Josh Zimmerman 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: Greg Kroah-Hartman

drm/i915/gen9: fix the WM memory bandwidth WA for Y tiling cases

2017-01-12T10:39:38+00:00

commit 2ef32dee97fcf41987722a37eb6ff1a983915e99 upstream.

The previous spec version said "double Ytile planes minimum lines",
and I interpreted this as referring to what the spec calls "Y tile
minimum", but in fact it was referring to what the spec calls "Minimum
Scanlines for Y tile". I noticed that Mahesh Kumar had a different
interpretation, so I sent and email to the spec authors and got
clarification on the correct meaning. Also, BSpec was updated and
should be clear now.

Fixes: ee3d532fcb64 ("drm/i915/gen9: unconditionally apply the memory bandwidth WA")
Cc: stable@vger.kernel.org
Cc: Mahesh Kumar 
Signed-off-by: Paulo Zanoni 
Reviewed-by: Matt Roper 
Link: http://patchwork.freedesktop.org/patch/msgid/1478636531-6081-1-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Greg Kroah-Hartman

drm/i915/gen9: unconditionally apply the memory bandwidth WA

2017-01-12T10:39:38+00:00

commit ee3d532fcb64872bc20be0ee58f7afdb9fa82abe upstream.

Mahesh Kumar is already working on a proper implementation for the
workaround, but while we still don't have it, let's just
unconditionally apply the workaround for everybody and we hope we can
close all those numerous bugzilla tickets. Also, I'm not sure how easy
it will be to backport the final implementation to the stable Kernels,
and this patch here is probably easier to backport.

At the present moment I still don't have confirmation that this patch
fixes any of the bugs listed below, but we should definitely try
testing all of them again.

v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude).
v3: Rebase (dev -> dev_priv change on ilk_wm_max_level).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830
Cc: Mahesh Kumar 
Cc: Lyude 
Cc: Dhinakaran Pandiyan 
Signed-off-by: Paulo Zanoni 
Reviewed-by: Lyude 
Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Greg Kroah-Hartman

drm/i915: disable PSR by default on HSW/BDW

2017-01-12T10:39:38+00:00

commit 1c4672ce4eeaeaadeea8adabaad21262b7172607 upstream.

We've been ignoring the poor bugzilla reporters that say PSR causes
system lockups and all other sorts of problems. The earliest bug
report is from April, so I think we can use the "revert the offending
commit if no fixes are presented within 8 months" rule here.

Fixes: 9b58e352b463 ("drm/i915: Enable PSR by default on Haswell and Broadwell.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985
Cc: Rodrigo Vivi 
Cc: Jim Bride 
Signed-off-by: Paulo Zanoni 
Acked-by: Rodrigo Vivi 
Reviewed-by: Rodrigo Vivi 
Acked-by: Jani Nikula 
Link: http://patchwork.freedesktop.org/patch/msgid/1481662664-18986-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 2ee7dc497e348eecbb82adbb1ea9e9a7e29fe921)
Signed-off-by: Jani Nikula 
Signed-off-by: Paulo Zanoni 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values

2017-01-12T10:39:38+00:00

commit 4349bd775cc8fd75cb648e3a2036a690f497de5c upstream.

We were storing viewport relative coordinates for AVIVO/DCE display
engines. However, radeon_crtc_cursor_set2 and radeon_cursor_reset pass
radeon_crtc->cursor_x/y as the x/y parameters of
radeon_cursor_move_locked, which would break if the CRTC isn't located
at (0, 0).

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer 
Reviewed-by: Alex Deucher 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

powerpc/pci/rpadlpar: Fix device reference leaks

2017-01-12T10:39:37+00:00

commit 99e5cde5eae78bef95bfe7c16ccda87fb070149b upstream.

Make sure to drop any device reference taken by vio_find_node() when
adding and removing virtual I/O slots.

Fixes: 5eeb8c63a38f ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration")
Signed-off-by: Johan Hovold 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)

2017-01-12T10:39:37+00:00

commit 1c7de2b4ff886a45fbd2f4c3d4627e0f37a9dd77 upstream.

There is at least one Chelsio 10Gb card which uses VPD area to store some
non-standard blocks (example below).  However pci_vpd_size() returns the
length of the first block only assuming that there can be only one VPD "End
Tag".

Since 4e1a635552d3 ("vfio/pci: Use kernel VPD access functions"), VFIO
blocks access beyond that offset, which prevents the guest "cxgb3" driver
from probing the device.  The host system does not have this problem as its
driver accesses the config space directly without pci_read_vpd().

Add a quirk to override the VPD size to a bigger value.  The maximum size
is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h.
We do not read the tag as the cxgb3 driver does as the driver supports
writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes
boundary.  The quirk is registered for all devices supported by the cxgb3
driver.

This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3
driver itself accesses VPD directly and the problem only exists with the
vfio-pci driver (when cxgb3 is not running on the host and may not be even
loaded) which blocks accesses beyond the first block of VPD data.  However
vfio-pci itself does not have quirks mechanism so we add it to PCI.

This is the controller:
Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030]

This is what I parsed from its VPD:
===
b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K'
 0000 Large item 42 bytes; name 0x2 Identifier String
	b'10 Gigabit Ethernet-SR PCI Express Adapter'
 002d Large item 74 bytes; name 0x10
	#00 [EC] len=7: b'D76809 '
	#0a [FN] len=7: b'46K7897'
	#14 [PN] len=7: b'46K7897'
	#1e [MN] len=4: b'1037'
	#25 [FC] len=4: b'5769'
	#2c [SN] len=12: b'YL102035603V'
	#3b [NA] len=12: b'00145E992ED1'
 007a Small item 1 bytes; name 0xf End Tag

 0c00 Large item 16 bytes; name 0x2 Identifier String
	b'S310E-SR-X      '
 0c13 Large item 234 bytes; name 0x10
	#00 [PN] len=16: b'TBD             '
	#13 [EC] len=16: b'110107730D2     '
	#26 [SN] len=16: b'97YL102035603V  '
	#39 [NA] len=12: b'00145E992ED1'
	#48 [V0] len=6: b'175000'
	#51 [V1] len=6: b'266666'
	#5a [V2] len=6: b'266666'
	#63 [V3] len=6: b'2000  '
	#6c [V4] len=2: b'1 '
	#71 [V5] len=6: b'c2    '
	#7a [V6] len=6: b'0     '
	#83 [V7] len=2: b'1 '
	#88 [V8] len=2: b'0 '
	#8d [V9] len=2: b'0 '
	#92 [VA] len=2: b'0 '
	#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0d00 Large item 252 bytes; name 0x11
	#00 [VC] len=16: b'122310_1222 dp  '
	#13 [VD] len=16: b'610-0001-00 H1\x00\x00'
	#26 [VE] len=16: b'122310_1353 fp  '
	#39 [VF] len=16: b'610-0001-00 H1\x00\x00'
	#4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0dff Small item 0 bytes; name 0xf End Tag

10f3 Large item 13315 bytes; name 0x62
!!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00'
===

Signed-off-by: Alexey Kardashevskiy 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman