commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream. The patch breaks userspace implementations (e.g. fdutils) and introduces regressions in behaviour. Previously, it was possible to O_NDELAY open a floppy device with no media inserted or with write protected media without an error. Some userspace tools use this particular behavior for probing. It's not the first time when we revert this patch. Previous revert is in commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling"). This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8. Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/ Reported-by: Mark Hounschell <markh@compro.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Wim Osterholt <wim@djo.tudelft.nl> Cc: Kurt Garloff <kurt@garloff.de> Cc: <stable@vger.kernel.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a49145acfb975d921464b84fe00279f99827d816 upstream. A fb_ioctl() FBIOPUT_VSCREENINFO call with invalid xres setting or yres setting in struct fb_var_screeninfo will result in a KASAN: vmalloc-out-of-bounds failure in bitfill_aligned() as the margins are being cleared. The margins are cleared in chunks and if the xres setting or yres setting is a value of zero upto the chunk size, the failure will occur. Add a margin check to validate xres and yres settings. Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reported-by: syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dhaval Giani <dhaval.giani@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1594149963-13801-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2287a51ba822384834dafc1c798453375d1107c7 upstream. As per the long-suffering comment. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ] As __vringh_iov() traverses a descriptor chain, it populates each descriptor entry into either read or write vring iov and increments that iov's ->used member. So, as we iterate over a descriptor chain, at any point, (riov/wriov)->used value gives the number of descriptor enteries available, which are to be read or written by the device. As all read iovs must precede the write iovs, wiov->used should be zero when we are traversing a read descriptor. Current code checks for wiov->i, to figure out whether any previous entry in the current descriptor chain was a write descriptor. However, iov->i is only incremented, when these vring iovs are consumed, at a later point, and remain 0 in __vringh_iov(). So, correct the check for read and write descriptor order, to use wiov->used. Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60f0779862e4ab943810187752c462e85f5fa371 ] Currently vq->broken field is read by virtqueue_is_broken() in busy loop in one context by virtnet_send_command(). vq->broken is set to true in other process context by virtio_break_device(). Reader and writer are accessing it without any synchronization. This may lead to a compiler optimization which may result to optimize reading vq->broken only once. Hence, force reading vq->broken on each invocation of virtqueue_is_broken() and also force writing it so that such update is visible to the readers. It is a theoretical fix that isn't yet encountered in the field. Signed-off-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210721142648.1525924-2-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ]
According to Armada XP datasheet bit at 0 position is corresponding for
TxInProg indication.
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ]
We should decode the latency and the max_latency before directly compare.
The latency should be presented as lat_enc = scale x value:
lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00)
>> 10)))
Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218")
Suggested-by: Yee Li <seven.yi.lee@gmail.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe71c61992c38f72c2b625b2ef25916b9f0d060 ]
kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);
However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);
To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 51f1954ad853d01ba4dc2b35dee14d8490ee05a1 upstream.
We can't depend on the TRB's HWO bit to determine if the TRB ring is
"full". A TRB is only available when the driver had processed it, not
when the controller consumed and relinquished the TRB's ownership to the
driver. Otherwise, the driver may overwrite unprocessed TRBs. This can
happen when many transfer events accumulate and the system is slow to
process them and/or when there are too many small requests.
If a request is in the started_list, that means there is one or more
unprocessed TRBs remained. Check this instead of the TRB's HWO bit
whether the TRB ring is full.
Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too")
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream. Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>