linux-stable.git/drivers, branch v4.9.263 Linux kernel stable tree PCI: rpadlpar: Fix potential drc_name corruption in store functions 2021-03-24T09:59:24+00:00 Tyrel Datwyler tyreld@linux.ibm.com 2021-03-15T21:48:21+00:00 ef8dc3d327cc799e3f6f1af41852f8f954f7115f commit cc7a0bb058b85ea03db87169c60c7cfdd5d34678 upstream. Both add_slot_store() and remove_slot_store() try to fix up the drc_name copied from the store buffer by placing a NUL terminator at nbyte + 1 or in place of a '\n' if present. However, the static buffer that we copy the drc_name data into is not zeroed and can contain anything past the n-th byte. This is problematic if a '\n' byte appears in that buffer after nbytes and the string copied into the store buffer was not NUL terminated to start with as the strchr() search for a '\n' byte will mark this incorrectly as the end of the drc_name string resulting in a drc_name string that contains garbage data after the n-th byte. Additionally it will cause us to overwrite that '\n' byte on the stack with NUL, potentially corrupting data on the stack. The following debugging shows an example of the drmgr utility writing "PHB 4543" to the add_slot sysfs attribute, but add_slot_store() logging a corrupted string value. drmgr: drmgr: -c phb -a -s PHB 4543 -d 1 add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19 Fix this by using strscpy() instead of memcpy() to ensure the string is NUL terminated when copied into the static drc_name buffer. Further, since the string is now NUL terminated the code only needs to change '\n' to '\0' when present. Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> [mpe: Reformat change log and add mention of possible stack corruption] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cc7a0bb058b85ea03db87169c60c7cfdd5d34678 upstream.

Both add_slot_store() and remove_slot_store() try to fix up the
drc_name copied from the store buffer by placing a NUL terminator at
nbyte + 1 or in place of a '\n' if present. However, the static buffer
that we copy the drc_name data into is not zeroed and can contain
anything past the n-th byte.

This is problematic if a '\n' byte appears in that buffer after nbytes
and the string copied into the store buffer was not NUL terminated to
start with as the strchr() search for a '\n' byte will mark this
incorrectly as the end of the drc_name string resulting in a drc_name
string that contains garbage data after the n-th byte.

Additionally it will cause us to overwrite that '\n' byte on the stack
with NUL, potentially corrupting data on the stack.

The following debugging shows an example of the drmgr utility writing
"PHB 4543" to the add_slot sysfs attribute, but add_slot_store()
logging a corrupted string value.

  drmgr: drmgr: -c phb -a -s PHB 4543 -d 1
  add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19

Fix this by using strscpy() instead of memcpy() to ensure the string
is NUL terminated when copied into the static drc_name buffer.
Further, since the string is now NUL terminated the code only needs to
change '\n' to '\0' when present.

Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mpe: Reformat change log and add mention of possible stack corruption]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: adis16400: Fix an error code in adis16400_initial_setup() 2021-03-24T09:59:24+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-02-16T19:42:13+00:00 cd124fcd999d3aafaf4ea72ab2669d79cb67de40 commit a71266e454b5df10d019b06f5ebacd579f76be28 upstream. This is to silence a new Smatch warning: drivers/iio/imu/adis16400.c:492 adis16400_initial_setup() warn: sscanf doesn't return error codes If the condition "if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {" is false then we return 1 instead of returning 0 and probe will fail. Fixes: 72a868b38bdd ("iio: imu: check sscanf return value") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/YCwgFb3JVG6qrlQ+@mwanda Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a71266e454b5df10d019b06f5ebacd579f76be28 upstream.

This is to silence a new Smatch warning:

    drivers/iio/imu/adis16400.c:492 adis16400_initial_setup()
    warn: sscanf doesn't return error codes

If the condition "if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {"
is false then we return 1 instead of returning 0 and probe will fail.

Fixes: 72a868b38bdd ("iio: imu: check sscanf return value")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YCwgFb3JVG6qrlQ+@mwanda
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: configfs: Fix KASAN use-after-free 2021-03-24T09:59:24+00:00 Jim Lin jilin@nvidia.com 2021-03-11T06:42:41+00:00 394ca034bb3eca17c173ccb7b175ab8f685264b8 commit 98f153a10da403ddd5e9d98a3c8c2bb54bb5a0b6 upstream. When gadget is disconnected, running sequence is like this. . composite_disconnect . Call trace: usb_string_copy+0xd0/0x128 gadget_config_name_configuration_store+0x4 gadget_config_name_attr_store+0x40/0x50 configfs_write_file+0x198/0x1f4 vfs_write+0x100/0x220 SyS_write+0x58/0xa8 . configfs_composite_unbind . configfs_composite_bind In configfs_composite_bind, it has "cn->strings.s = cn->configuration;" When usb_string_copy is invoked. it would allocate memory, copy input string, release previous pointed memory space, and use new allocated memory. When gadget is connected, host sends down request to get information. Call trace: usb_gadget_get_string+0xec/0x168 lookup_string+0x64/0x98 composite_setup+0xa34/0x1ee8 If gadget is disconnected and connected quickly, in the failed case, cn->configuration memory has been released by usb_string_copy kfree but configfs_composite_bind hasn't been run in time to assign new allocated "cn->configuration" pointer to "cn->strings.s". When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling memory is accessed, "BUG: KASAN: use-after-free" error occurs. Cc: stable@vger.kernel.org Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 98f153a10da403ddd5e9d98a3c8c2bb54bb5a0b6 upstream.

When gadget is disconnected, running sequence is like this.
. composite_disconnect
. Call trace:
  usb_string_copy+0xd0/0x128
  gadget_config_name_configuration_store+0x4
  gadget_config_name_attr_store+0x40/0x50
  configfs_write_file+0x198/0x1f4
  vfs_write+0x100/0x220
  SyS_write+0x58/0xa8
. configfs_composite_unbind
. configfs_composite_bind

In configfs_composite_bind, it has
"cn->strings.s = cn->configuration;"

When usb_string_copy is invoked. it would
allocate memory, copy input string, release previous pointed memory space,
and use new allocated memory.

When gadget is connected, host sends down request to get information.
Call trace:
  usb_gadget_get_string+0xec/0x168
  lookup_string+0x64/0x98
  composite_setup+0xa34/0x1ee8

If gadget is disconnected and connected quickly, in the failed case,
cn->configuration memory has been released by usb_string_copy kfree but
configfs_composite_bind hasn't been run in time to assign new allocated
"cn->configuration" pointer to "cn->strings.s".

When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling
memory is accessed, "BUG: KASAN: use-after-free" error occurs.

Cc: stable@vger.kernel.org
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: replace hardcode maximum usb string length by definition 2021-03-24T09:59:24+00:00 Macpaul Lin macpaul.lin@mediatek.com 2020-06-18T09:13:38+00:00 fe0c15025a38372cfe08bda746bd2851408634fa commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream. Replace hardcoded maximum USB string length (126 bytes) by definition "USB_MAX_STRING_LEN". Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream.

Replace hardcoded maximum USB string length (126 bytes) by definition
"USB_MAX_STRING_LEN".

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: lpfc: Fix some error codes in debugfs 2021-03-24T09:59:24+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-03-12T07:42:11+00:00 debd66577f059bab9d46130625920ee389858542 commit 19f1bc7edf0f97186810e13a88f5b62069d89097 upstream. If copy_from_user() or kstrtoull() fail then the correct behavior is to return a negative error code. Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 19f1bc7edf0f97186810e13a88f5b62069d89097 upstream.

If copy_from_user() or kstrtoull() fail then the correct behavior is to
return a negative error code.

Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda
Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmet: don't check iosqes,iocqes for discovery controllers 2021-03-24T09:59:23+00:00 Sagi Grimberg sagi@grimberg.me 2021-03-15T22:34:51+00:00 8daf2ab0631d0ca0331a1c63e45c6cd2a46b76af commit d218a8a3003e84ab136e69a4e30dd4ec7dab2d22 upstream. From the base spec, Figure 78: "Controller Configuration, these fields are defined as parameters to configure an "I/O Controller (IOC)" and not to configure a "Discovery Controller (DC). ... If the controller does not support I/O queues, then this field shall be read-only with a value of 0h Just perform this check for I/O controllers. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Reported-by: Belanger, Martin <Martin.Belanger@dell.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d218a8a3003e84ab136e69a4e30dd4ec7dab2d22 upstream.

From the base spec, Figure 78:

  "Controller Configuration, these fields are defined as parameters to
   configure an "I/O Controller (IOC)" and not to configure a "Discovery
   Controller (DC).

   ...
   If the controller does not support I/O queues, then this field shall
   be read-only with a value of 0h

Just perform this check for I/O controllers.

Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ixgbe: prevent ptp_rx_hang from running when in FILTER_ALL mode 2021-03-24T09:59:22+00:00 Jacob Keller jacob.e.keller@intel.com 2018-01-29T23:57:48+00:00 13f759dcb05d8b27ac83eca9cae87ee738957ad1 commit 6704a3abf4cf4181a1ee64f5db4969347b88ca1d upstream. On hardware which supports timestamping all packets, the timestamps are recorded in the packet buffer, and the driver no longer uses or reads the registers. This makes the logic for checking and clearing Rx timestamp hangs meaningless. If we run the ixgbe_ptp_rx_hang() function in this case, then the driver will continuously spam the log output with "Clearing Rx timestamp hang". These messages are spurious, and confusing to end users. The original code in commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) did have a flag PTP_RX_TIMESTAMP_IN_REGISTER which was intended to be used to avoid the Rx timestamp hang check, however it did not actually check the flag before calling the function. Do so now in order to stop the checks and prevent the spurious log messages. Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> 
commit 6704a3abf4cf4181a1ee64f5db4969347b88ca1d upstream.

On hardware which supports timestamping all packets, the timestamps are
recorded in the packet buffer, and the driver no longer uses or reads
the registers. This makes the logic for checking and clearing Rx
timestamp hangs meaningless.

If we run the ixgbe_ptp_rx_hang() function in this case, then the driver
will continuously spam the log output with "Clearing Rx timestamp hang".
These messages are spurious, and confusing to end users.

The original code in commit a9763f3cb54c ("ixgbe: Update PTP to support
X550EM_x devices", 2015-12-03) did have a flag PTP_RX_TIMESTAMP_IN_REGISTER
which was intended to be used to avoid the Rx timestamp hang check,
however it did not actually check the flag before calling the function.

Do so now in order to stop the checks and prevent the spurious log
messages.

Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
ixgbe: check for Tx timestamp timeouts during watchdog 2021-03-24T09:59:22+00:00 Jacob Keller jacob.e.keller@intel.com 2017-05-03T17:29:04+00:00 c31cd5fd02c26c15fb1814f1e8c389362f4e17cb commit 622a2ef538fb3ca8eccf49716aba8267d6e95a47 upstream. The ixgbe driver has logic to handle only one Tx timestamp at a time, using a state bit lock to avoid multiple requests at once. It may be possible, if incredibly unlikely, that a Tx timestamp event is requested but never completes. Since we use an interrupt scheme to determine when the Tx timestamp occurred we would never clear the state bit in this case. Add an ixgbe_ptp_tx_hang() function similar to the already existing ixgbe_ptp_rx_hang() function. This function runs in the watchdog routine and makes sure we eventually recover from this case instead of permanently disabling Tx timestamps. Note: there is no currently known way to cause this without hacking the driver code to force it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 622a2ef538fb3ca8eccf49716aba8267d6e95a47 upstream.

The ixgbe driver has logic to handle only one Tx timestamp at a time,
using a state bit lock to avoid multiple requests at once.

It may be possible, if incredibly unlikely, that a Tx timestamp event is
requested but never completes. Since we use an interrupt scheme to
determine when the Tx timestamp occurred we would never clear the state
bit in this case.

Add an ixgbe_ptp_tx_hang() function similar to the already existing
ixgbe_ptp_rx_hang() function. This function runs in the watchdog routine
and makes sure we eventually recover from this case instead of
permanently disabling Tx timestamps.

Note: there is no currently known way to cause this without hacking the
driver code to force it.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: dsa: b53: Support setting learning on port 2021-03-24T09:59:22+00:00 Florian Fainelli f.fainelli@gmail.com 2021-02-22T22:30:10+00:00 c7f1c92a983a3ce12e58c913395ac3c0d3172e8e commit f9b3827ee66cfcf297d0acd6ecf33653a5f297ef upstream. Add support for being able to set the learning attribute on port, and make sure that the standalone ports start up with learning disabled. We can remove the code in bcm_sf2 that configured the ports learning attribute because we want the standalone ports to have learning disabled by default and port 7 cannot be bridged, so its learning attribute will not change past its initial configuration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f9b3827ee66cfcf297d0acd6ecf33653a5f297ef upstream.

Add support for being able to set the learning attribute on port, and
make sure that the standalone ports start up with learning disabled.

We can remove the code in bcm_sf2 that configured the ports learning
attribute because we want the standalone ports to have learning disabled
by default and port 7 cannot be bridged, so its learning attribute will
not change past its initial configuration.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/events: avoid handling the same event on two cpus at the same time 2021-03-17T15:10:19+00:00 Juergen Gross jgross@suse.com 2021-03-15T09:06:31+00:00 959b239634239ca2db0de5c822dad1ae48c0a861 commit b6622798bc50b625a1e62f82c7190df40c1f5b21 upstream. When changing the cpu affinity of an event it can happen today that (with some unlucky timing) the same event will be handled on the old and the new cpu at the same time. Avoid that by adding an "event active" flag to the per-event data and call the handler only if this flag isn't set. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Julien Grall <jgrall@amazon.com> Link: https://lore.kernel.org/r/20210306161833.4552-4-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b6622798bc50b625a1e62f82c7190df40c1f5b21 upstream.

When changing the cpu affinity of an event it can happen today that
(with some unlucky timing) the same event will be handled on the old
and the new cpu at the same time.

Avoid that by adding an "event active" flag to the per-event data and
call the handler only if this flag isn't set.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Link: https://lore.kernel.org/r/20210306161833.4552-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>