linux-stable.git/drivers, branch v4.9.174

media: v4l2: i2c: ov7670: Fix PLL bypass register values

2019-05-08T05:19:12+00:00

commit 61da76beef1e4f0b6ba7be4f8d0cf0dac7ce1f55 upstream.

The following commits:
commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675")
commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll for ov7675")
introduced the ability to bypass PLL multiplier and use input clock (xvclk)
as pixel clock output frequency for ov7675 sensor.

PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675
sensor manuals. Macros used to set DBLV register seem wrong in the
driver, as their values do not match what reported in the datasheet.

Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to
default 0x0a reserved value (according to datasheets).

While at there, remove a write to DBLV register in
"ov7675_set_framerate()" that over-writes the previous one to the same
register that takes "info->pll_bypass" flag into account instead of setting PLL
multiplier to 4x unconditionally.

And, while at there, since "info->pll_bypass" is only used in
set/get_framerate() functions used by ov7675 only, it is not necessary
to check for the device id at probe time to make sure that when using
ov7670 "info->pll_bypass" is set to false.

Fixes: f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675")

Signed-off-by: Jacopo Mondi 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ

2019-05-08T05:19:12+00:00

commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 upstream.

SNVS IRQ is requested before necessary driver data initialized,
if there is a pending IRQ during driver probe phase, kernel
NULL pointer panic will occur in IRQ handler. To avoid such
scenario, just initialize necessary driver data before enabling
IRQ. This patch is inspired by NXP's internal kernel tree.

Fixes: d3dc6e232215 ("input: keyboard: imx: add snvs power key driver")
Signed-off-by: Anson Huang 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

scsi: RDMA/srpt: Fix a credit leak for aborted commands

2019-05-08T05:19:11+00:00

commit 40ca8757291ca7a8775498112d320205b2a2e571 upstream.

Make sure that the next time a response is sent to the initiator that the
credit it had allocated for the aborted request gets freed.

Cc: Doug Ledford 
Cc: Jason Gunthorpe 
Cc: Nicholas Bellinger 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Cc: Christoph Hellwig 
Fixes: 131e6abc674e ("target: Add TFO->abort_task for aborted task resources release") # v3.15
Signed-off-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

staging: iio: adt7316: fix the dac write calculation

2019-05-08T05:19:11+00:00

commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.

The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.

The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.

Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

staging: iio: adt7316: fix the dac read calculation

2019-05-08T05:19:11+00:00

commit 45130fb030aec26ac28b4bb23344901df3ec3b7f upstream.

The calculation of the current dac value is using the wrong bits of the
dac lsb register. Create two macros to shift the lsb register value into
lsb position, depending on whether the dac is 10 or 12 bit. Initialize
data to 0 so, with an 8 bit dac, the msb register value can be bitwise
ORed with data.

Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

staging: iio: adt7316: allow adt751x to use internal vref for all dacs

2019-05-08T05:19:11+00:00

commit 10bfe7cc1739c22f0aa296b39e53f61e9e3f4d99 upstream.

With adt7516/7/9, internal vref is available for dacs a and b, dacs c and
d, or all dacs. The driver doesn't currently support internal vref for all
dacs. Change the else if to an if so both bits are checked rather than
just one or the other.

Signed-off-by: Jeremy Fertic 
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

xsysace: Fix error handling in ace_setup

2019-05-08T05:19:11+00:00

[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]

If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000   CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.

Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek 
Signed-off-by: Guenter Roeck 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

net: hns: Fix WARNING when remove HNS driver with SMMU enabled

2019-05-08T05:19:10+00:00

[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]

When enable SMMU, remove HNS driver will cause a WARNING:

[  141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[  141.954673] Modules linked in: hns_enet_drv(-)
[  141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G        W         5.0.0-rc1-28723-gb729c57de95c-dirty #32
[  141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[  142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[  142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[  142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[  142.027066] sp : ffff000013533b90
[  142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[  142.044420] x27: 0000000000000000 x26: 0000000000000000
[  142.055113] x25: 0000000056000000 x24: 0000000000000015
[  142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[  142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[  142.087192] x19: 0000000000001000 x18: 0000000000000007
[  142.097885] x17: 000000000000000e x16: 0000000000000001
[  142.108578] x15: 0000000000000019 x14: 363139343a70616d
[  142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[  142.129963] x11: 00000000ffffffff x10: 0000000000000006
[  142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[  142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[  142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[  142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[  142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[  142.194120] Call trace:
[  142.199030]  __iommu_dma_unmap+0xc0/0xc8
[  142.206920]  iommu_dma_unmap_page+0x20/0x28
[  142.215335]  __iommu_unmap_page+0x40/0x60
[  142.223399]  hnae_unmap_buffer+0x110/0x134
[  142.231639]  hnae_free_desc+0x6c/0x10c
[  142.239177]  hnae_fini_ring+0x14/0x34
[  142.246540]  hnae_fini_queue+0x2c/0x40
[  142.254080]  hnae_put_handle+0x38/0xcc
[  142.261619]  hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[  142.272312]  platform_drv_remove+0x24/0x64
[  142.280552]  device_release_driver_internal+0x17c/0x20c
[  142.291070]  driver_detach+0x4c/0x90
[  142.298259]  bus_remove_driver+0x5c/0xd8
[  142.306148]  driver_unregister+0x2c/0x54
[  142.314037]  platform_driver_unregister+0x10/0x18
[  142.323505]  hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[  142.335248]  __arm64_sys_delete_module+0x214/0x25c
[  142.344891]  el0_svc_common+0xb0/0x10c
[  142.352430]  el0_svc_handler+0x24/0x80
[  142.359968]  el0_svc+0x8/0x7c0
[  142.366104] ---[ end trace 60ad1cd58e63c407 ]---

The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.

The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().

In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.

Signed-off-by: Yonglong Liu 
Signed-off-by: Peng Li 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: hns: Use NAPI_POLL_WEIGHT for hns driver

2019-05-08T05:19:10+00:00

[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]

When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.

Signed-off-by: Yonglong Liu 
Signed-off-by: Peng Li 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()

2019-05-08T05:19:10+00:00

[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]

This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]

After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.

This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.

Signed-off-by: Liubin Shu 
Signed-off-by: Zhen Lei 
Signed-off-by: Yonglong Liu 
Signed-off-by: Peng Li 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin