linux-stable.git/drivers, branch v4.9.151

rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set

2019-01-16T21:12:32+00:00

commit 85f5a4d666fd9be73856ed16bb36c5af5b406b29 upstream.

There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list.  During this window, we set
"already" and return 0.

Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written.  In particular, "rbd unmap"
will retry the write multiple times a second:

  10:28:05.463299 write(4, "0", 1)        = 0
  10:28:05.463509 write(4, "0", 1)        = 0
  10:28:05.463720 write(4, "0", 1)        = 0
  10:28:05.463942 write(4, "0", 1)        = 0
  10:28:05.464155 write(4, "0", 1)        = 0

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov 
Tested-by: Dongsheng Yang 
Signed-off-by: Greg Kroah-Hartman

i2c: dev: prevent adapter retries and timeout being set as minus value

2019-01-16T21:12:32+00:00

commit 6ebec961d59bccf65d08b13fc1ad4e6272a89338 upstream.

If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.

If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.

Signed-off-by: Yi Zeng 
[wsa: minor grammar updates to commit message]
Signed-off-by: Wolfram Sang 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman

ACPI: power: Skip duplicate power resource references in _PRx

2019-01-16T21:12:32+00:00

commit 7d7b467cb95bf29597b417d4990160d4ea6d69b9 upstream.

Some ACPI tables contain duplicate power resource references like this:

        Name (_PR0, Package (0x04)  // _PR0: Power Resources for D0
        {
            P28P,
            P18P,
            P18P,
            CLK4
        })

This causes a WARN_ON in sysfs_add_link_to_group() because we end up
adding a link to the same acpi_device twice:

sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1
Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016
Call Trace:
 dump_stack+0x5c/0x80
 sysfs_warn_dup.cold.3+0x17/0x2a
 sysfs_do_create_link_sd.isra.2+0xa9/0xb0
 sysfs_add_link_to_group+0x30/0x50
 acpi_power_expose_list+0x74/0xa0
 acpi_power_add_remove_device+0x50/0xa0
 acpi_add_single_object+0x26b/0x5f0
 acpi_bus_check_add+0xc4/0x250
 ...

To address this issue, make acpi_extract_power_resources() check for
duplicates and simply skip them when found.

Cc: All applicable 
Signed-off-by: Hans de Goede 
[ rjw: Subject & changelog, comments ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB

2019-01-16T21:12:31+00:00

commit 3483254b89438e60f719937376c5e0ce2bc46761 upstream.

To match the Corsair Strafe RGB, the Corsair K70 RGB also requires
USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues
discussed here: https://github.com/ckb-next/ckb-next/issues/42.
Otherwise roughly 1 in 10 boots the keyboard will fail to be detected.

Patch that applied delay control quirk for Corsair Strafe RGB:
cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20")

Previous K70 RGB patch to add delay-init quirk:
7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards")

Signed-off-by: Jack Stocker 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: storage: add quirk for SMI SM3350

2019-01-16T21:12:31+00:00

commit 0a99cc4b8ee83885ab9f097a3737d1ab28455ac0 upstream.

The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.

Add a bad sense quirk for it.

Signed-off-by: Icenowy Zheng 
Cc: stable 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: storage: don't insert sane sense for SPC3+ when bad sense specified

2019-01-16T21:12:31+00:00

commit c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream.

Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).

Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.

Signed-off-by: Icenowy Zheng 
Cc: stable 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: send ZLP for Telit 3G Intel based modems

2019-01-16T21:12:31+00:00

commit 34aabf918717dd14e05051896aaecd3b16b53d95 upstream.

Telit 3G Intel based modems require zero packet to be sent if
out data size is equal to the endpoint max packet size.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

2019-01-13T09:03:55+00:00

commit 38355a5f9a22bfa5bd5b1bb79805aca39fa53729 upstream.

This happened when I tried to boot normal Fedora 29 system with latest
available kernel (from fedora rawhide, plus some unrelated custom
patches):

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	PGD 0 P4D 0
	Oops: 0010 [#1] SMP PTI
	CPU: 6 PID: 1422 Comm: libvirtd Tainted: G          I       4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
	Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
	RIP: 0010:          (null)
	Code: Bad RIP value.
	RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8
	RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80
	RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
	R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730
	FS:  00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0
	Call Trace:
	 ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
	 ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
	 ? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
	 ? bnx2x_set_features+0x79/0xa0 [bnx2x]
	 ? __netdev_update_features+0x244/0x9e0
	 ? netlink_broadcast_filtered+0x136/0x4b0
	 ? netdev_update_features+0x22/0x60
	 ? dev_disable_lro+0x1c/0xe0
	 ? devinet_sysctl_forward+0x1c6/0x211
	 ? proc_sys_call_handler+0xab/0x100
	 ? __vfs_write+0x36/0x1a0
	 ? rcu_read_lock_sched_held+0x79/0x80
	 ? rcu_sync_lockdep_assert+0x2e/0x60
	 ? __sb_start_write+0x14c/0x1b0
	 ? vfs_write+0x159/0x1c0
	 ? vfs_write+0xba/0x1c0
	 ? ksys_write+0x52/0xc0
	 ? do_syscall_64+0x60/0x1f0
	 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some investigation I figured out that recently added cleanup code
tries to call VLAN filtering de-initialization function which exist only
for newer hardware. Corresponding function pointer is not
set (== 0) for older hardware, namely these chips:

	#define CHIP_NUM_57710			0x164e
	#define CHIP_NUM_57711			0x164f
	#define CHIP_NUM_57711E			0x1650

And I have one of those in my test system:

	Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]

Function bnx2x_init_vlan_mac_fp_objs() from
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to
initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.

This regression was introduced after v4.20-rc7, and still exists in v4.20
release.

Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Ivan Mironov 
Signed-off-by: Ivan Mironov 
Acked-by: Sudarsana Kalluru 
Signed-off-by: David S. Miller 
Cc: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

drm/vc4: Set ->is_yuv to false when num_planes == 1

2019-01-13T09:03:55+00:00

commit 2b02a05bdc3a62d36e0d0b015351897109e25991 upstream.

When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.

Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.

Fixes: fc04023fafecf ("drm/vc4: Add support for YUV planes.")
Cc: 
Signed-off-by: Boris Brezillon 
Reviewed-by: Eric Anholt 
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman

power: supply: olpc_battery: correct the temperature units

2019-01-13T09:03:55+00:00

commit ed54ffbe554f0902689fd6d1712bbacbacd11376 upstream.

According to [1] and [2], the temperature values are in tenths of degree
Celsius. Exposing the Celsius value makes the battery appear on fire:

  $ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery
  ...
      temperature:         236.9 degrees C

Tested on OLPC XO-1 and OLPC XO-1.75 laptops.

[1] include/linux/power_supply.h
[2] Documentation/power/power_supply_class.txt

Fixes: fb972873a767 ("[BATTERY] One Laptop Per Child power/battery driver")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel 
Acked-by: Pavel Machek 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman