linux-stable.git/drivers, branch v4.5.5 Linux kernel stable tree drm/amdgpu: fix DP mode validation 2016-05-19T01:35:15+00:00 Alex Deucher alexander.deucher@amd.com 2016-05-11T20:21:03+00:00 e23744bfad9fad9d1991298a449342e6f76dd1a6 commit c47b9e0944e483309d66c807d650ac8b8ceafb57 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c47b9e0944e483309d66c807d650ac8b8ceafb57 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: fix DP mode validation 2016-05-19T01:35:15+00:00 Alex Deucher alexander.deucher@amd.com 2016-05-11T20:16:53+00:00 df6ac4bcc9c820841b17b9af0f8c270b54e485cb commit ff0bd441bdfbfa09d05fdba9829a0401a46635c1 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff0bd441bdfbfa09d05fdba9829a0401a46635c1 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: fix DP link training issue with second 4K monitor 2016-05-19T01:35:15+00:00 Arindam Nath arindam.nath@amd.com 2016-05-04T18:09:59+00:00 0f1b8876ab01c393da876070f8a970165db5e158 commit 1a738347df2ee4977459a8776fe2c62196bdcb1b upstream. There is an issue observed when we hotplug a second DP 4K monitor to the system. Sometimes, the link training fails for the second monitor after HPD interrupt generation. The issue happens when some queued or deferred transactions are already present on the AUX channel when we initiate a new transcation to (say) get DPCD or during link training. We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL register so that we can ignore any such deferred transactions when a new AUX transaction is initiated. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1a738347df2ee4977459a8776fe2c62196bdcb1b upstream.

There is an issue observed when we hotplug a second DP
4K monitor to the system. Sometimes, the link training
fails for the second monitor after HPD interrupt
generation.

The issue happens when some queued or deferred transactions
are already present on the AUX channel when we initiate
a new transcation to (say) get DPCD or during link training.

We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL
register so that we can ignore any such deferred
transactions when a new AUX transaction is initiated.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915/bdw: Add missing delay during L3 SQC credit programming 2016-05-19T01:35:15+00:00 Imre Deak imre.deak@intel.com 2016-05-03T12:54:19+00:00 9907c72bc2428326c31280568875d78ce848e2b9 commit d6a862fe8c48229ba342648bcd535b2404724603 upstream. BSpec requires us to wait ~100 clocks before re-enabling clock gating, so make sure we do this. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462280061-1457-2-git-send-email-imre.deak@intel.com (cherry picked from commit 48e5d68d28f00c0cadac5a830980ff3222781abb) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d6a862fe8c48229ba342648bcd535b2404724603 upstream.

BSpec requires us to wait ~100 clocks before re-enabling clock gating,
so make sure we do this.

CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462280061-1457-2-git-send-email-imre.deak@intel.com
(cherry picked from commit 48e5d68d28f00c0cadac5a830980ff3222781abb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "drm/i915: start adding dp mst audio" 2016-05-19T01:35:15+00:00 Lyude cpaul@redhat.com 2016-05-03T15:01:32+00:00 6c1827a97251893cffd513e83c9b5ef5a20d254d commit 26792526cc3e29e3ccbc15c996beb61fa64be5af upstream. Right now MST audio is causing too many kernel panics to really keep around in the kernel. On top of that, even after fixing said panics it's still basically non-functional (at least on all the setups I've tested it on). Revert until we have a proper solution for this. This reverts commit 3d52ccf52f2c51f613e42e65be0f06e4e6788093. Signed-off-by: Lyude <cpaul@redhat.com> Fixes: 3d52ccf52f2c ("drm/i915: start adding dp mst audio") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462287692-28570-1-git-send-email-cpaul@redhat.com (cherry picked from commit 5a8f97ea04c98201deeb973c3f711c3c156115e9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 26792526cc3e29e3ccbc15c996beb61fa64be5af upstream.

Right now MST audio is causing too many kernel panics to really keep
around in the kernel. On top of that, even after fixing said panics it's
still basically non-functional (at least on all the setups I've tested
it on). Revert until we have a proper solution for this.

This reverts commit 3d52ccf52f2c51f613e42e65be0f06e4e6788093.

Signed-off-by: Lyude <cpaul@redhat.com>
Fixes: 3d52ccf52f2c ("drm/i915: start adding dp mst audio")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462287692-28570-1-git-send-email-cpaul@redhat.com
(cherry picked from commit 5a8f97ea04c98201deeb973c3f711c3c156115e9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Bail out of pipe config compute loop on LPT 2016-05-19T01:35:15+00:00 Daniel Vetter daniel.vetter@ffwll.ch 2016-05-03T08:33:01+00:00 36d8fb8f65ad431fcb26142d6f871de20168fb8e commit 2700818ac9f935d8590715eecd7e8cadbca552b6 upstream. LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit f58a1acc7e4a1f37d26124ce4c875c647fbcc61f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2700818ac9f935d8590715eecd7e8cadbca552b6 upstream.

LPT is pch, so might run into the fdi bandwidth constraint (especially
since it has only 2 lanes). But right now we just force pipe_bpp back
to 24, resulting in a nice loop (which we bail out with a loud
WARN_ON). Fix this.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=93477
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch
(cherry picked from commit f58a1acc7e4a1f37d26124ce4c875c647fbcc61f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: fix PLL sharing on DCE6.1 (v2) 2016-05-19T01:35:14+00:00 Lucas Stach dev@lynxeye.de 2016-05-05T14:16:44+00:00 eca3d50f42068aaa949b633d70ea59914bb0b8dd commit e3c00d87845ab375f90fa6e10a5e72a3a5778cd3 upstream. On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not be taken into consideration when looking for an already enabled PLL to be shared with other outputs. This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland based laptop, where the internal display is connected to UNIPHYA through a TRAVIS DP->LVDS bridge. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78987 v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop extra parameter. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e3c00d87845ab375f90fa6e10a5e72a3a5778cd3 upstream.

On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not
be taken into consideration when looking for an already enabled PLL
to be shared with other outputs.

This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland
based laptop, where the internal display is connected to UNIPHYA through
a TRAVIS DP->LVDS bridge.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=78987

v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop
    extra parameter.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency 2016-05-19T01:35:14+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2016-04-26T16:46:32+00:00 be19315585fa23cc9a2758e9f29f01b1095e134f commit a04e23d42a1ce5d5f421692bb1c7e9352832819d upstream. Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure if this is a late addition to the spec, or if I simply overlooked this step when writing the original code. This is what Bspec has to say about CDCLK_FREQ: "Program this field to the CD clock frequency minus one. This is used to generate a divided down clock for miscellaneous timers in display." And the "Broadwell Sequences for Changing CD Clock Frequency" section clarifies this further: "For CD clock 337.5 MHz, program 337 decimal. For CD clock 450 MHz, program 449 decimal. For CD clock 540 MHz, program 539 decimal. For CD clock 675 MHz, program 674 decimal." Cc: Mika Kahola <mika.kahola@intel.com> Fixes: b432e5cfd5e9 ("drm/i915: BDW clock change support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit 7f1052a8fa38df635ab0dc0e6025b64ab9834824) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a04e23d42a1ce5d5f421692bb1c7e9352832819d upstream.

Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure
if this is a late addition to the spec, or if I simply overlooked this
step when writing the original code.

This is what Bspec has to say about CDCLK_FREQ:
"Program this field to the CD clock frequency minus one. This is used to
 generate a divided down clock for miscellaneous timers in display."

And the "Broadwell Sequences for Changing CD Clock Frequency" section
clarifies this further:
"For CD clock 337.5 MHz, program 337 decimal.
 For CD clock 450 MHz, program 449 decimal.
 For CD clock 540 MHz, program 539 decimal.
 For CD clock 675 MHz, program 674 decimal."

Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: b432e5cfd5e9 ("drm/i915: BDW clock change support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7f1052a8fa38df635ab0dc0e6025b64ab9834824)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "[media] videobuf2-v4l2: Verify planes array in buffer dequeueing" 2016-05-19T01:35:14+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2016-05-11T16:09:34+00:00 1943bd0f10074f9b4636a15e72c00d4e5142a8aa commit 93f0750dcdaed083d6209b01e952e98ca730db66 upstream. This patch causes a Kernel panic when called on a DVB driver. This was also reported by David R <david@unsolicited.net>: May 7 14:47:35 server kernel: [ 501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 May 7 14:47:35 server kernel: [ 501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.247354] PGD cae6f067 PUD ca99c067 PMD 0 May 7 14:47:35 server kernel: [ 501.247426] Oops: 0000 [#1] SMP May 7 14:47:35 server kernel: [ 501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport May 7 14:47:35 server kernel: [ 501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3 May 7 14:47:35 server kernel: [ 501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211 07/08/2009 May 7 14:47:35 server kernel: [ 501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000 May 7 14:47:35 server kernel: [ 501.249861] RIP: 0010:[<ffffffffa0222c71>] [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.250002] RSP: 0018:ffff8801e07a3de8 EFLAGS: 00010086 May 7 14:47:35 server kernel: [ 501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283 May 7 14:47:35 server kernel: [ 501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014 May 7 14:47:35 server kernel: [ 501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000 May 7 14:47:35 server kernel: [ 501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8 May 7 14:47:35 server kernel: [ 501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828 May 7 14:47:35 server kernel: [ 501.250528] FS: 00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40 May 7 14:47:35 server kernel: [ 501.250631] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 7 14:47:35 server kernel: [ 501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0 May 7 14:47:35 server kernel: [ 501.250794] Stack: May 7 14:47:35 server kernel: [ 501.250822] ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb May 7 14:47:35 server kernel: [ 501.250937] 0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000 May 7 14:47:35 server kernel: [ 501.251051] ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38 May 7 14:47:35 server kernel: [ 501.251165] Call Trace: May 7 14:47:35 server kernel: [ 501.251200] [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.251306] [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251398] [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100 May 7 14:47:35 server kernel: [ 501.251482] [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251569] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251662] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.255982] [<ffffffff8106f984>] kthread+0xc4/0xe0 May 7 14:47:35 server kernel: [ 501.260292] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.264615] [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70 May 7 14:47:35 server kernel: [ 501.268962] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e May 7 14:47:35 server kernel: [ 501.282146] RIP [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.286391] RSP <ffff8801e07a3de8> May 7 14:47:35 server kernel: [ 501.290619] CR2: 0000000000000004 May 7 14:47:35 server kernel: [ 501.294786] ---[ end trace b2b354153ccad110 ]--- This reverts commit 2c1f6951a8a82e6de0d82b1158b5e493fc6c54ab. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Fixes: 2c1f6951a8a8 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing") Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 93f0750dcdaed083d6209b01e952e98ca730db66 upstream.

This patch causes a Kernel panic when called on a DVB driver.

This was also reported by David R <david@unsolicited.net>:

May  7 14:47:35 server kernel: [  501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
May  7 14:47:35 server kernel: [  501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.247354] PGD cae6f067 PUD ca99c067 PMD 0
May  7 14:47:35 server kernel: [  501.247426] Oops: 0000 [#1] SMP
May  7 14:47:35 server kernel: [  501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport
May  7 14:47:35 server kernel: [  501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3
May  7 14:47:35 server kernel: [  501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211    07/08/2009
May  7 14:47:35 server kernel: [  501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000
May  7 14:47:35 server kernel: [  501.249861] RIP: 0010:[<ffffffffa0222c71>]  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.250002] RSP: 0018:ffff8801e07a3de8  EFLAGS: 00010086
May  7 14:47:35 server kernel: [  501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283
May  7 14:47:35 server kernel: [  501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014
May  7 14:47:35 server kernel: [  501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000
May  7 14:47:35 server kernel: [  501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8
May  7 14:47:35 server kernel: [  501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828
May  7 14:47:35 server kernel: [  501.250528] FS:  00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40
May  7 14:47:35 server kernel: [  501.250631] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
May  7 14:47:35 server kernel: [  501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0
May  7 14:47:35 server kernel: [  501.250794] Stack:
May  7 14:47:35 server kernel: [  501.250822]  ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb
May  7 14:47:35 server kernel: [  501.250937]  0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000
May  7 14:47:35 server kernel: [  501.251051]  ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38
May  7 14:47:35 server kernel: [  501.251165] Call Trace:
May  7 14:47:35 server kernel: [  501.251200]  [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.251306]  [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251398]  [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100
May  7 14:47:35 server kernel: [  501.251482]  [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251569]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251662]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.255982]  [<ffffffff8106f984>] kthread+0xc4/0xe0
May  7 14:47:35 server kernel: [  501.260292]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.264615]  [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70
May  7 14:47:35 server kernel: [  501.268962]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e
May  7 14:47:35 server kernel: [  501.282146] RIP  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.286391]  RSP <ffff8801e07a3de8>
May  7 14:47:35 server kernel: [  501.290619] CR2: 0000000000000004
May  7 14:47:35 server kernel: [  501.294786] ---[ end trace b2b354153ccad110 ]---

This reverts commit 2c1f6951a8a82e6de0d82b1158b5e493fc6c54ab.

Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Fixes: 2c1f6951a8a8 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing")
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: max8997-haptic - fix NULL pointer dereference 2016-05-19T01:35:14+00:00 Marek Szyprowski m.szyprowski@samsung.com 2016-05-09T16:31:47+00:00 6d8b57ff73188c389d1a3706fd67bb41915bc3ab commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 upstream.

NULL pointer derefence happens when booting with DTB because the
platform data for haptic device is not set in supplied data from parent
MFD device.

The MFD device creates only platform data (from Device Tree) for itself,
not for haptic child.

Unable to handle kernel NULL pointer dereference at virtual address 0000009c
pgd = c0004000
	[0000009c] *pgd=00000000
	Internal error: Oops: 5 [#1] PREEMPT SMP ARM
	(max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0)
	(platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0)
	(driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0)
	(__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c)
	(bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218)
	(bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8)
	(driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8)
	(do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
	(kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114)
	(kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>