linux-stable.git/drivers, branch v4.4.98

can: c_can: don't indicate triple sampling support for D_CAN

2017-11-15T16:13:13+00:00

commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream.

The D_CAN controller doesn't provide a triple sampling mode, so don't set
the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling
triple sampling is a no-op.

Signed-off-by: Richard Schütz 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: sun4i: handle overrun in RX FIFO

2017-11-15T16:13:13+00:00

commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream.

SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not
drained fast enough (overrun) it's getting mangled. Already received
frames are dropped - the data can't be restored.

Signed-off-by: Gerhard Bertelsmann 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

rbd: use GFP_NOIO for parent stat and data requests

2017-11-15T16:13:13+00:00

commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream.

rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on
the writeback path for cloned images -- we attempt a stat on the parent
object to see if it exists and potentially read it in to call copyup.
GFP_NOIO should be used instead of GFP_KERNEL here.

Link: http://tracker.ceph.com/issues/22014
Signed-off-by: Ilya Dryomov 
Reviewed-by: David Disseldorp 
[idryomov@gmail.com: backport to < 4.9: context]
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue

2017-11-15T16:13:13+00:00

commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream.

This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work
around mode set failure in 2D VMs")

With Wayland desktop and atomic mode set, during the mode setting
process there is a moment when two framebuffer sized surfaces
are being pinned.  This was not an issue with Xorg.

Since this only happens during a mode change, there should be no
performance impact by increasing allowable mem_size.

Signed-off-by: Sinclair Yeh 
Reviewed-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN060C to the ACPI table

2017-11-15T16:13:13+00:00

commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream.

ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Do not shadow error values

2017-11-15T16:13:11+00:00

commit d313876925f3e7a480a02773fd333bcab9202d5e upstream.

All the helper functions (i.e. hp_wmi_dock_state, hp_wmi_tablet_state,
...) using hp_wmi_perform_query to perform an HP WMI query shadow the
returned value in case of error.

We return -EINVAL only when the HP WMI query returns a positive value
(the specific error code) to not mix this up with the actual value
returned by the helper function.

Suggested-by: Andy Shevchenko 
Signed-off-by: Carlo Caione 
Signed-off-by: Darren Hart (VMware) 
Cc: Philip Müller 
Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state

2017-11-15T16:13:11+00:00

commit c7dfc2facbd69dad89b75e13c608da709668dcd0 upstream.

hp_wmi_tablet_state() fails to return the correct error code when
hp_wmi_perform_query() returns the HP WMI query specific error code
that is a positive value.

Signed-off-by: Carlo Caione 
Signed-off-by: Darren Hart (VMware) 
Cc: Philip Müller 
Signed-off-by: Greg Kroah-Hartman

cdc_ncm: Set NTB format again after altsetting switch for Huawei devices

2017-11-15T16:13:11+00:00

commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream.

Some firmwares in Huawei E3372H devices have been observed to switch back
to NTB 32-bit format after altsetting switch.
This patch implements a driver flag to check for the device settings and
set NTB format to 16-bit again if needed.
The flag has been activated for devices controlled by the huawei_cdc_ncm.c
driver.

V1->V2:
- fixed broken error checks
- some corrections to the commit message
V2->V3:
- variable name changes, to clarify what's happening
- check (and possibly set) the NTB format later in the common bind code path

Signed-off-by: Enrico Mioso 
Reported-and-tested-by: Christian Panton 
Reviewed-by: Bjørn Mork 
CC: Bjørn Mork 
CC: Christian Panton 
CC: linux-usb@vger.kernel.org
CC: netdev@vger.kernel.org
CC: Oliver Neukum 
Signed-off-by: David S. Miller 
Cc: Porto Rio 
Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Fix detection for dock and tablet mode

2017-11-15T16:13:11+00:00

commit 298747b7579f5bbbced793d997b333fd10a24921 upstream.

The current driver code is not checking for the error values returned by
'hp_wmi_dock_state()' and 'hp_wmi_tablet_state()' before passing the
returned values down to 'input_report_switch()'. This error code is
being translated to '1' in the input subsystem, reporting the wrong
status.

The biggest problem caused by this issue is that several laptops are
wrongly reported by the driver as docked, preventing them to be put to
sleep using the LID (and in most cases they are not even dockable).

With this patch we create the report switches only if we are able to
read the dock and tablet mode status correctly from ACPI.

Signed-off-by: Carlo Caione 
Signed-off-by: Darren Hart (VMware) 
Cc: Philip Müller 
Signed-off-by: Greg Kroah-Hartman

s390/qeth: issue STARTLAN as first IPA command

2017-11-15T16:13:11+00:00

[ Upstream commit 1034051045d125579ab1e8fcd5a724eeb0e70149 ]

STARTLAN needs to be the first IPA command after MPC initialization
completes.
So move the qeth_send_startlan() call from the layer disciplines
into the core path, right after the MPC handshake.
While at it, replace the magic LAN OFFLINE return code
with the existing enum.

Signed-off-by: Julian Wiedmann 
Reviewed-by: Thomas Richter 
Reviewed-by: Ursula Braun 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman