linux-stable.git/drivers, branch v4.4.48

base/memory, hotplug: fix a kernel oops in show_valid_zones()

2017-02-09T07:02:47+00:00

commit a96dfddbcc04336bbed50dc2b24823e45e09e80c upstream.

Reading a sysfs "memoryN/valid_zones" file leads to the following oops
when the first page of a range is not backed by struct page.
show_valid_zones() assumes that 'start_pfn' is always valid for
page_zone().

 BUG: unable to handle kernel paging request at ffffea017a000000
 IP: show_valid_zones+0x6f/0x160

This issue may happen on x86-64 systems with 64GiB or more memory since
their memory block size is bumped up to 2GiB.  [1] An example of such
systems is desribed below.  0x3240000000 is only aligned by 1GiB and
this memory block starts from 0x3200000000, which is not backed by
struct page.

 BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable

Since test_pages_in_a_zone() already checks holes, fix this issue by
extending this function to return 'valid_start' and 'valid_end' for a
given range.  show_valid_zones() then proceeds with the valid range.

[1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on
    large-memory x86-64 systems")'

Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com
Signed-off-by: Toshi Kani 
Cc: Greg Kroah-Hartman 
Cc: Zhang Zhen 
Cc: Reza Arbab 
Cc: David Rientjes 
Cc: Dan Williams 
Cc: 	[4.4+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add device ID for HP lt2523 (Novatel E371)

2017-02-09T07:02:46+00:00

commit 5d03a2fd2292e71936c4235885c35ccc3c94695b upstream.

Yet another laptop vendor rebranded Novatel E371.

Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Assorted buffer overflow checks.

2017-02-09T07:02:46+00:00

commit 83e526f2a2fa4b2e82b6bd3ddbb26b70acfa8947 upstream.

OS descriptor head, when flagged as provided, is accessed without
checking if it fits in provided buffer. Verify length before access.
Also, there are other places where buffer length it checked
after accessing offsets which are potentially past the end. Check
buffer length before as well to fail cleanly.

Signed-off-by: Vincent Pelletier 
Acked-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

USB: Add quirk for WORLDE easykey.25 MIDI keyboard

2017-02-09T07:02:46+00:00

commit d9b2997e4a0a874e452df7cdd7de5a54502bd0aa upstream.

Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218,
idProduct=0401). The device reports that it has config string
descriptor at index 3, but when the system selects the configuration
and tries to get the description, it returns a -EPROTO error,
the communication restarts and this keeps repeating over and over again.
Not requesting the string descriptor makes the device work correctly.

Relevant info from Wireshark:

[...]

CONFIGURATION DESCRIPTOR
    bLength: 9
    bDescriptorType: 0x02 (CONFIGURATION)
    wTotalLength: 101
    bNumInterfaces: 2
    bConfigurationValue: 1
    iConfiguration: 3
    Configuration bmAttributes: 0xc0  SELF-POWERED  NO REMOTE-WAKEUP
        1... .... = Must be 1: Must be 1 for USB 1.1 and higher
        .1.. .... = Self-Powered: This device is SELF-POWERED
        ..0. .... = Remote Wakeup: This device does NOT support remote wakeup
    bMaxPower: 50  (100mA)

[...]

     45 0.369104       host                  2.38.0                USB      64     GET DESCRIPTOR Request STRING

[...]

URB setup
    bmRequestType: 0x80
        1... .... = Direction: Device-to-host
        .00. .... = Type: Standard (0x00)
        ...0 0000 = Recipient: Device (0x00)
    bRequest: GET DESCRIPTOR (6)
    Descriptor Index: 0x03
    bDescriptorType: 0x03
    Language Id: English (United States) (0x0409)
    wLength: 255

     46 0.369255       2.38.0                host                  USB      64     GET DESCRIPTOR Response STRING[Malformed Packet]

[...]

Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0
USB URB
    [Source: 2.38.0]
    [Destination: host]
    URB id: 0xffff88021f62d480
    URB type: URB_COMPLETE ('C')
    URB transfer type: URB_CONTROL (0x02)
    Endpoint: 0x80, Direction: IN
    Device: 38
    URB bus id: 2
    Device setup request: not relevant ('-')
    Data: present (0)
    URB sec: 1484896277
    URB usec: 455031
    URB status: Protocol error (-EPROTO) (-71)
    URB length [bytes]: 0
    Data length [bytes]: 0
    [Request in: 45]
    [Time from request: 0.000151000 seconds]
    Unused Setup Header
    Interval: 0
    Start frame: 0
    Copy of Transfer Flags: 0x00000200
    Number of ISO descriptors: 0
[Malformed Packet: USB]
    [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
        [Malformed Packet (Exception occurred)]
        [Severity level: Error]
        [Group: Malformed]

Signed-off-by: Lukáš Lalinský 
Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add ATEN device ID

2017-02-09T07:02:46+00:00

commit d07830db1bdb254e4b50d366010b219286b8c937 upstream.

Seems that ATEN serial-to-usb devices using pl2303 exist with
different device ids. This patch adds a missing device ID so it
is recognised by the driver.

Signed-off-by: Marcel J.E. Mol 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add Dell DW5570 QDL

2017-02-09T07:02:46+00:00

commit 24d615a694d649aa2e167c3f97f62bdad07e3f84 upstream.

The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by
default boot with vid 0x413c and pid 0x81a3. When triggered QDL download
mode, the device switches to pid 0x81a6 and provides the standard TTY
used for firmware upgrade.

Signed-off-by: Aleksander Morgado 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

HID: wacom: Fix poor prox handling in 'wacom_pl_irq'

2017-02-09T07:02:46+00:00

commit 282e4637bc1c0b338708bcebd09d31c69abec070 upstream.

Commit 025bcc1 performed cleanup work on the 'wacom_pl_irq' function, making
it follow the standards used in the rest of the codebase. The change
unintiontionally allowed the function to send input events from reports
that are not marked as being in prox. This can cause problems as the
report values for X, Y, etc. are not guaranteed to be correct. In
particular, occasionally the tablet will send a report with these values
set to zero. If such a report is received it can caus an unexpected jump
in the XY position.

This patch surrounds more of the processing code with a proximity check,
preventing these zeroed reports from overwriting the current state. To
be safe, only the tool type and ABS_MISC events should be reported when
the pen is marked as being out of prox.

Fixes: 025bcc1540 ("HID: wacom: Simplify 'wacom_pl_irq'")
Signed-off-by: Jason Gerecke 
Reviewed-by: Ping Cheng 
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: Ignore unexpected CARD_INT interrupts

2017-02-09T07:02:46+00:00

commit 161e6d44a5e2d3f85365cb717d60e363171b39e6 upstream.

One of our kernelCI boxes hanged at boot because a faulty eSDHC device
was triggering spurious CARD_INT interrupts for SD cards, causing CMD52
reads, which are not allowed for SD devices.  This adds a sanity check
to the interruption path, preventing that illegal command from getting
sent if the CARD_INT interruption should be disabled.

This quirk allows that particular machine to resume boot despite the
faulty hardware, instead of getting hung dealing with thousands of
mishandled interrupts.

Suggested-by: Adrian Hunter 
Signed-off-by: Gabriel Krisman Bertazi 
Acked-by: Adrian Hunter 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices

2017-02-09T07:02:45+00:00

commit e0edc8c546463f268d41d064d855bcff994c52fa upstream.

Marko reports that CX1-JB512-HP shows the same timeout issues as
CX1-JB256-HP.  Let's apply MAX_SEC_128 to all devices in the series.

Signed-off-by: Tejun Heo 
Reported-by: Marko Koski-Vähälä 
Signed-off-by: Greg Kroah-Hartman

ata: sata_mv:- Handle return value of devm_ioremap.

2017-02-09T07:02:45+00:00

commit 064c3db9c564cc5be514ac21fb4aa26cc33db746 upstream.

Here, If devm_ioremap will fail. It will return NULL.
Then hpriv->base = NULL - 0x20000; Kernel can run into
a NULL-pointer dereference. This error check will avoid
NULL pointer dereference.

Signed-off-by: Arvind Yadav 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman