linux-stable.git/drivers, branch v4.4.294 Linux kernel stable tree serial: pl011: Add ACPI SBSA UART match id 2021-12-08T07:44:08+00:00 Pierre Gondois Pierre.Gondois@arm.com 2021-11-09T17:22:48+00:00 d0a5c79fe2417180be3c1720c6d0f881a0aad694 commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream. The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000 Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID. Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate. Cc: <stable@vger.kernel.org> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream.

The document 'ACPI for Arm Components 1.0' defines the following
_HID mappings:
-'Prime cell UART (PL011)': ARMH0011
-'SBSA UART': ARMHB000

Use the sbsa-uart driver when a device is described with
the 'ARMHB000' _HID.

Note:
PL011 devices currently use the sbsa-uart driver instead of the
uart-pl011 driver. Indeed, PL011 devices are not bound to a clock
in ACPI. It is not possible to change their baudrate.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: msm_serial: Deactivate RX DMA for polling support 2021-12-08T07:44:08+00:00 Sven Eckelmann sven@narfation.org 2021-11-13T12:10:50+00:00 aff30188bff57d73704377402a0d5cc4fa1f0b30 commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream. The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of setup, it is often sharing a serial device with the normal system console. This is usually no problem because the polling helpers can consume input values directly (when in kgdb context) and the normal Linux handlers can only consume new input values after kgdb switched back. This is not true anymore when RX DMA is enabled for UARTDM controllers. Single input values can no longer be received correctly. Instead following seems to happen: * on 1. input, some old input is read (continuously) * on 2. input, two old inputs are read (continuously) * on 3. input, three old input values are read (continuously) * on 4. input, 4 previous inputs are received This repeats then for each group of 4 input values. This behavior changes slightly depending on what state the controller was when the first input was received. But this makes working with kgdb basically impossible because control messages are always corrupted when kgdboc tries to parse them. RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid these kind of problems. No such problem was noticed for TX DMA. Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream.

The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of
setup, it is often sharing a serial device with the normal system console.
This is usually no problem because the polling helpers can consume input
values directly (when in kgdb context) and the normal Linux handlers can
only consume new input values after kgdb switched back.

This is not true anymore when RX DMA is enabled for UARTDM controllers.
Single input values can no longer be received correctly. Instead following
seems to happen:

* on 1. input, some old input is read (continuously)
* on 2. input, two old inputs are read (continuously)
* on 3. input, three old input values are read (continuously)
* on 4. input, 4 previous inputs are received

This repeats then for each group of 4 input values.

This behavior changes slightly depending on what state the controller was
when the first input was received. But this makes working with kgdb
basically impossible because control messages are always corrupted when
kgdboc tries to parse them.

RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid
these kind of problems. No such problem was noticed for TX DMA.

Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vgacon: Propagate console boot parameters before calling `vc_resize' 2021-12-08T07:44:08+00:00 Maciej W. Rozycki macro@orcam.me.uk 2021-10-25T22:26:22+00:00 42f220cd0e038ee05b48091148823cec795ea9b0 commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream. Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream.

Fix a division by zero in `vgacon_resize' with a backtrace like:

vgacon_resize
vc_do_resize
vgacon_init
do_bind_con_driver
do_unbind_con_driver
fbcon_fb_unbind
do_unregister_framebuffer
do_register_framebuffer
register_framebuffer
__drm_fb_helper_initial_config_and_unlock
drm_helper_hpd_irq_event
dw_hdmi_irq
irq_thread
kthread

caused by `c->vc_cell_height' not having been initialized.  This has
only started to trigger with commit 860dafa90259 ("vt: Fix character
height handling with VT_RESIZEX"), however the ultimate offender is
commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow
retaking of the console").

Said commit has added a call to `vc_resize' whenever `vgacon_init' is
called with the `init' argument set to 0, which did not happen before.
And the call is made before a key vgacon boot parameter retrieved in
`vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to
use to the console structure being worked on.  Previously the parameter
was `c->vc_font.height' and now it is `c->vc_cell_height'.

In this particular scenario the registration of fbcon has failed and vt
resorts to vgacon.  Now fbcon does have initialized `c->vc_font.height'
somehow, unlike `c->vc_cell_height', which is why this code did not
crash before, but either way the boot parameters should have been copied
to the console structure ahead of the call to `vc_resize' rather than
afterwards, so that first the call has a chance to use them and second
they do not change the console structure to something possibly different
from what was used by `vc_resize'.

Move the propagation of the vgacon boot parameters ahead of the call to
`vc_resize' then.  Adjust the comment accordingly.

Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console")
Cc: stable@vger.kernel.org # v2.6.18+
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() 2021-12-08T07:44:08+00:00 Zhou Qingyang zhou1615@umn.edu 2021-11-30T11:08:48+00:00 3a061d54e260b701b538873b43e399d9b8b83e03 commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream.

In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().

Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.

Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
natsemi: xtensa: fix section mismatch warnings 2021-12-08T07:44:08+00:00 Randy Dunlap rdunlap@infradead.org 2021-11-30T06:39:47+00:00 11af7c8093960439be656360a74e5a11865ccad9 commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream. Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream.

Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.

WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.

WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.

Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl 2021-12-08T07:44:08+00:00 Baokun Li libaokun1@huawei.com 2021-11-26T02:03:07+00:00 34837976947de8f8a13ac64ffebc9d7ac635e561 commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream. Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream.

Trying to remove the fsl-sata module in the PPC64 GNU/Linux
leads to the following warning:
 ------------[ cut here ]------------
 remove_proc_entry: removing non-empty directory 'irq/69',
   leaking at least 'fsl-sata[ff0221000.sata]'
 WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722
   .remove_proc_entry+0x20c/0x220
 IRQMASK: 0
 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220
 LR [c000000000338268] .remove_proc_entry+0x208/0x220
 Call Trace:
  .remove_proc_entry+0x208/0x220 (unreliable)
  .unregister_irq_proc+0x104/0x140
  .free_desc+0x44/0xb0
  .irq_free_descs+0x9c/0xf0
  .irq_dispose_mapping+0x64/0xa0
  .sata_fsl_remove+0x58/0xa0 [sata_fsl]
  .platform_drv_remove+0x40/0x90
  .device_release_driver_internal+0x160/0x2c0
  .driver_detach+0x64/0xd0
  .bus_remove_driver+0x70/0xf0
  .driver_unregister+0x38/0x80
  .platform_driver_unregister+0x14/0x30
  .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
 ---[ end trace 0ea876d4076908f5 ]---

The driver creates the mapping by calling irq_of_parse_and_map(),
so it also has to dispose the mapping. But the easy way out is to
simply use platform_get_irq() instead of irq_of_parse_map(). Also
we should adapt return value checking and propagate error values.

In this case the mapping is not managed by the device but by
the of core, so the device has not to dispose the mapping.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl 2021-12-08T07:44:08+00:00 Baokun Li libaokun1@huawei.com 2021-11-26T02:03:06+00:00 cdcd80292106df5cda325426e96495503e41f947 commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream. When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream.

When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux,
a bug is reported:
 ==================================================================
 BUG: Unable to handle kernel data access on read at 0x80000800805b502c
 Oops: Kernel access of bad area, sig: 11 [#1]
 NIP [c0000000000388a4] .ioread32+0x4/0x20
 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl]
 Call Trace:
  .free_irq+0x1c/0x4e0 (unreliable)
  .ata_host_stop+0x74/0xd0 [libata]
  .release_nodes+0x330/0x3f0
  .device_release_driver_internal+0x178/0x2c0
  .driver_detach+0x64/0xd0
  .bus_remove_driver+0x70/0xf0
  .driver_unregister+0x38/0x80
  .platform_driver_unregister+0x14/0x30
  .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
  .__se_sys_delete_module+0x1ec/0x2d0
  .system_call_exception+0xfc/0x1f0
  system_call_common+0xf8/0x200
 ==================================================================

The triggering of the BUG is shown in the following stack:

driver_detach
  device_release_driver_internal
    __device_release_driver
      drv->remove(dev) --> platform_drv_remove/platform_remove
        drv->remove(dev) --> sata_fsl_remove
          iounmap(host_priv->hcr_base);			<---- unmap
          kfree(host_priv);                             <---- free
      devres_release_all
        release_nodes
          dr->node.release(dev, dr->data) --> ata_host_stop
            ap->ops->port_stop(ap) --> sata_fsl_port_stop
                ioread32(hcr_base + HCONTROL)           <---- UAF
            host->ops->host_stop(host)

The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should
not be executed in drv->remove. These functions should be executed in
host_stop after port_stop. Therefore, we move these functions to the
new function sata_fsl_host_stop and bind the new function to host_stop.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() 2021-12-08T07:44:07+00:00 Teng Qi starmiku1207184332@gmail.com 2021-11-18T07:01:18+00:00 9a3af2f11bb7a50dcdcdfb98a687831dd75768e8 [ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ] The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ]

The definition of macro MOTO_SROM_BUG is:
  #define MOTO_SROM_BUG    (lp->active == 8 && (get_unaligned_le32(
  dev->dev_addr) & 0x00ffffff) == 0x3e0008)

and the if statement
  if (MOTO_SROM_BUG) lp->active = 0;

using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
  lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].mci = *p;

However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound 2021-12-08T07:44:07+00:00 zhangyue zhangyue1@kylinos.cn 2021-11-18T05:46:32+00:00 ec5bd0aef1cec96830d0c7e06d3597d9e786cc98 [ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ] In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ]

In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.

At this time, the array 'lp->phy[8]' may be out of bound.

Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: iscsi: Unblock session then wake up error handler 2021-12-08T07:44:07+00:00 Mike Christie michael.christie@oracle.com 2021-11-05T22:10:47+00:00 ecb534f3481b09f9fb4101301848c0e638bac433 [ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ]

We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.

For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.

Set the device state then call into libiscsi to wake up the error handler.

Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>