linux-stable.git/drivers, branch v4.4.219

drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()

2020-04-13T08:31:35+00:00

commit a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream.

When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.

This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.

Signed-off-by: Hans Verkuil 
Reviewed-by: Lyude Paul 
Acked-by: Alex Deucher 
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

clk: qcom: rcg: Return failure for RCG update

2020-04-13T08:31:35+00:00

commit 21ea4b62e1f3dc258001a68da98c9663a9dbd6c7 upstream.

In case of update config failure, return -EBUSY, so that consumers could
handle the failure gracefully.

Signed-off-by: Taniya Das 
Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow

2020-04-13T08:31:34+00:00

commit 987914ab841e2ec281a35b54348ab109b4c0bb4e upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon 
Reviewed-by: Maor Gottlieb 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Call kobject_put() when kobject_init_and_add() fails

2020-04-13T08:31:33+00:00

commit dfb5394f804ed4fcea1fc925be275a38d66712ab upstream.

When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.

Cc: 
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn 
Signed-off-by: Kaike Wan 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: Update features after registering netdev

2020-04-13T08:31:32+00:00

commit 45c8184c1bed1ca8a7f02918552063a00b909bf5 upstream.

Update the features after calling register_netdev() otherwise the
device features are not set up correctly and it not possible to change
the MTU of the device. After this change, the features reported by
ethtool match the device's features before the commit which introduced
the issue and it is possible to change the device's MTU.

Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Reported-by: Liam Shepherd 
Signed-off-by: Ross Lagerwall 
Reviewed-by: Juergen Gross 
Signed-off-by: David S. Miller 
Signed-off-by: Nobuhiro Iwamatsu (CIP) 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: Fix mismatched rtnl_unlock

2020-04-13T08:31:32+00:00

commit cb257783c2927b73614b20f915a91ff78aa6f3e8 upstream.

Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Reported-by: Ben Hutchings 
Signed-off-by: Ross Lagerwall 
Reviewed-by: Juergen Gross 
Signed-off-by: David S. Miller 
Signed-off-by: Nobuhiro Iwamatsu (CIP) 
Signed-off-by: Greg Kroah-Hartman

power: supply: axp288_charger: Fix unchecked return value

2020-04-13T08:31:32+00:00

commit c3422ad5f84a66739ec6a37251ca27638c85b6be upstream.

Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().

Fix this by adding a proper check, a message reporting any errors
and returning *pirq*

Addresses-Coverity-ID: 1443940 ("Improper use of negative value")
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Hans de Goede 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Nobuhiro Iwamatsu (CIP)

random: always use batched entropy for get_random_u{32,64}

2020-04-13T08:31:31+00:00

commit 69efea712f5b0489e67d07565aad5c94e09a3e52 upstream.

It turns out that RDRAND is pretty slow. Comparing these two
constructions:

  for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret))
    arch_get_random_long(&ret);

and

  long buf[CHACHA_BLOCK_SIZE / sizeof(long)];
  extract_crng((u8 *)buf);

it amortizes out to 352 cycles per long for the top one and 107 cycles
per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H.

And importantly, the top one has the drawback of not benefiting from the
real rng, whereas the bottom one has all the nice benefits of using our
own chacha rng. As get_random_u{32,64} gets used in more places (perhaps
beyond what it was originally intended for when it was introduced as
get_random_{int,long} back in the md5 monstrosity era), it seems like it
might be a good thing to strengthen its posture a tiny bit. Doing this
should only be stronger and not any weaker because that pool is already
initialized with a bunch of rdrand data (when available). This way, we
get the benefits of the hardware rng as well as our own rng.

Another benefit of this is that we no longer hit pitfalls of the recent
stream of AMD bugs in RDRAND. One often used code pattern for various
things is:

  do {
  	val = get_random_u32();
  } while (hash_table_contains_key(val));

That recent AMD bug rendered that pattern useless, whereas we're really
very certain that chacha20 output will give pretty distributed numbers,
no matter what.

So, this simplification seems better both from a security perspective
and from a performance perspective.

Signed-off-by: Jason A. Donenfeld 
Reviewed-by: Greg Kroah-Hartman 
Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

slcan: Don't transmit uninitialized stack data in padding

2020-04-13T08:31:31+00:00

[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ]

struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).

This commit just zeroes the whole struct including the padding.

Signed-off-by: Richard Palethorpe 
Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook 
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting

2020-04-13T08:31:30+00:00

[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]

Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)

Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman