linux-stable.git/drivers, branch v4.4.121 Linux kernel stable tree dm io: fix duplicate bio completion due to missing ref count 2018-03-11T15:19:47+00:00 Mike Snitzer snitzer@redhat.com 2017-06-20T23:14:30+00:00 bb97a65730f975743b2d95b5cecadc5a254c0159 commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream. If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count. Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077 Reported-by: Zhang Yi <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream.

If only a subset of the devices associated with multiple regions support
a given special operation (eg. DISCARD) then the dec_count() that is
used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io
caller's bio to be completed multiple times.  As was reported against
the dm-mirror target that had mirror legs with a mix of discard
capabilities.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077
Reported-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/qeth: fix IPA command submission race 2018-03-11T15:19:47+00:00 Julian Wiedmann jwi@linux.vnet.ibm.com 2018-02-27T17:58:17+00:00 f3b580d3223463be83fa6dd1ef5585ebb99a7fec [ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]

If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.

So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().

Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.

As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/qeth: fix SETIP command handling 2018-03-11T15:19:46+00:00 Julian Wiedmann jwi@linux.vnet.ibm.com 2018-02-09T10:03:50+00:00 290db9ba25917e20cc95484a52388ed0b3abbfe1 [ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ] send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ppp: prevent unregistered channels from connecting to PPP units 2018-03-11T15:19:46+00:00 Guillaume Nault g.nault@alphalink.fr 2018-03-02T17:41:16+00:00 eae0a9ae192ae829c951109ed08eb2e698167e24 [ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ] PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]

PPP units don't hold any reference on the channels connected to it.
It is the channel's responsibility to ensure that it disconnects from
its unit before being destroyed.
In practice, this is ensured by ppp_unregister_channel() disconnecting
the channel from the unit before dropping a reference on the channel.

However, it is possible for an unregistered channel to connect to a PPP
unit: register a channel with ppp_register_net_channel(), attach a
/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
with ppp_unregister_channel() and finally connect the /dev/ppp file to
a PPP unit with ioctl(PPPIOCCONNECT).

Once in this situation, the channel is only held by the /dev/ppp file,
which can be released at anytime and free the channel without letting
the parent PPP unit know. Then the ppp structure ends up with dangling
pointers in its ->channels list.

Prevent this scenario by forbidding unregistered channels from
connecting to PPP units. This maintains the code logic by keeping
ppp_unregister_channel() responsible from disconnecting the channel if
necessary and avoids modification on the reference counting mechanism.

This issue seems to predate git history (successfully reproduced on
Linux 2.6.26 and earlier PPP commits are unrelated).

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hdlc_ppp: carrier detect ok, don't turn off negotiation 2018-03-11T15:19:46+00:00 Denis Du dudenis2000@yahoo.ca 2018-02-24T21:51:42+00:00 830dd26a5397cee47ca4d622966cfb6d4ee69def [ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ] Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <dudenis2000@yahoo.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]

Sometimes when physical lines have a just good noise to make the protocol
handshaking fail, but the carrier detect still good. Then after remove of
the noise, nobody will trigger this protocol to be start again to cause
the link to never come back. The fix is when the carrier is still on, not
terminate the protocol handshaking.

Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "led: core: Fix brightness setting when setting delay_off=0" 2018-03-11T15:19:45+00:00 Ben Hutchings ben.hutchings@codethink.co.uk 2018-03-08T15:59:07+00:00 3f3437fbb2d8f780e84f507282d03facb4ccf248 This reverts commit 20ac8f72514b3af8b62c520d55656ded865eff00, which was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream. The bug that it should fix was only introduced in Linux 4.7, and in 4.4 it causes a regression. Reported-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 20ac8f72514b3af8b62c520d55656ded865eff00, which
was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream.
The bug that it should fix was only introduced in Linux 4.7, and
in 4.4 it causes a regression.

Reported-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
leds: do not overflow sysfs buffer in led_trigger_show 2018-03-11T15:19:45+00:00 Nathan Sullivan nathan.sullivan@ni.com 2016-08-15T22:20:14+00:00 dff485e36287be123a844dc9164ba0417cd34552 commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream. Per the documentation, use scnprintf instead of sprintf to ensure there is never more than PAGE_SIZE bytes of trigger names put into the buffer. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream.

Per the documentation, use scnprintf instead of sprintf to ensure there
is never more than PAGE_SIZE bytes of trigger names put into the
buffer.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Zach Brown <zach.brown@ni.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: m88ds3103: don't call a non-initalized function 2018-03-11T15:19:44+00:00 Mauro Carvalho Chehab mchehab@s-opensource.com 2018-02-10T11:14:10+00:00 0dfc2fb61c79dbd4e99152525e193ae054dc86d3 commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream.

If m88d3103 chip ID is not recognized, the device is not initialized.

However, it returns from probe without any error, causing this OOPS:

[    7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    7.689297] pgd = 7b0bd7a7
[    7.689302] [00000000] *pgd=00000000
[    7.689318] Internal error: Oops: 80000005 [#1] SMP ARM
[    7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media
[    7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23
[    7.689361] Hardware name: BCM2835
[    7.689367] PC is at 0x0
[    7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103]
[    7.689386] pc : [<00000000>]    lr : [<bf0ae1ec>]    psr: 60000013
[    7.689391] sp : ed8e5c20  ip : ed8c1e00  fp : ed8945c0
[    7.689395] r10: ed894000  r9 : ed894378  r8 : eda736c0
[    7.689400] r7 : ed894070  r6 : ed8e5c44  r5 : bf0bb040  r4 : eda77600
[    7.689405] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : eda77600
[    7.689412] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    7.689417] Control: 10c5383d  Table: 2d8e806a  DAC: 00000051
[    7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63)
[    7.689428] Stack: (0xed8e5c20 to 0xed8e6000)
[    7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10
[    7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000
[    7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000
[    7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434
[    7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0
[    7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000
[    7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8
[    7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600
[    7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000
[    7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4
[    7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc
[    7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4
[    7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000
[    7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000
[    7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0
[    7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24
[    7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0
[    7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684
[    7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000
[    7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000
[    7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104
[    7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000
[    7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8
[    7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4
[    7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000
[    7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c
[    7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0
[    7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000
[    7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky])
[    7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2])
[    7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8)
[    7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4)
[    7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c)
[    7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c)
[    7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264)
[    7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4)
[    7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134)
[    7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168)
[    7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4)
[    7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8)
[    7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec)
[    7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54)
[    7.690018] Code: bad PC value

This may happen on normal circumstances, if, for some reason, the demod
hangs and start returning an invalid chip ID:

[   10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00

So, change the logic to cause probe to fail with -ENODEV, preventing
the OOPS.

Detected while testing DVB MMAP patches on Raspberry Pi 3 with
DVBSky S960CI.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() 2018-03-11T15:19:44+00:00 Viresh Kumar viresh.kumar@linaro.org 2018-02-23T04:08:28+00:00 baf311edeed221183eb5ed51ebf8d7e849f35b0c commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream.

commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
accidentally broke cpufreq on s3c2410 and s3c2412.

These two platforms don't have a CPU frequency table and used to skip
calling cpufreq_table_validate_and_show() for them.  But with the
above commit, we started calling it unconditionally and that will
eventually fail as the frequency table pointer is NULL.

Fix this by calling cpufreq_table_validate_and_show() conditionally
again.

Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
Cc: 3.13+ <stable@vger.kernel.org> # v3.13+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus 2018-03-11T15:19:44+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:31:16+00:00 9cc4d1f51dd14ad6a997237995347f269eb5551a commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>