linux-stable.git/drivers, branch v4.19.307 Linux kernel stable tree Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d" 2024-02-23T07:12:58+00:00 Junxiao Bi junxiao.bi@oracle.com 2023-11-08T18:22:16+00:00 1e8c1c2a92692881ac7ec92dcf1c8a846584251b [ Upstream commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d ] This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74. That commit introduced the following race and can cause system hung. md_write_start: raid5d: // mddev->in_sync == 1 set "MD_SB_CHANGE_PENDING" // running before md_write_start wakeup it waiting "MD_SB_CHANGE_PENDING" cleared >>>>>>>>> hung wakeup mddev->thread ... waiting "MD_SB_CHANGE_PENDING" cleared >>>> hung, raid5d should clear this flag but get hung by same flag. The issue reverted commit fixing is fixed by last patch in a new way. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d ]

This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74.

That commit introduced the following race and can cause system hung.

 md_write_start:             raid5d:
 // mddev->in_sync == 1
 set "MD_SB_CHANGE_PENDING"
                            // running before md_write_start wakeup it
                             waiting "MD_SB_CHANGE_PENDING" cleared
                             >>>>>>>>> hung
 wakeup mddev->thread
 ...
 waiting "MD_SB_CHANGE_PENDING" cleared
 >>>> hung, raid5d should clear this flag
 but get hung by same flag.

The issue reverted commit fixing is fixed by last patch in a new way.

Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
pmdomain: core: Move the unused cleanup to a _sync initcall 2024-02-23T07:12:58+00:00 Konrad Dybcio konrad.dybcio@linaro.org 2023-12-27T15:21:24+00:00 81c0229f34f0e1330789fae616b9e2219ab28477 commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream. The unused clock cleanup uses the _sync initcall to give all users at earlier initcalls time to probe. Do the same to avoid leaving some PDs dangling at "on" (which actually happened on qcom!). Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream.

The unused clock cleanup uses the _sync initcall to give all users at
earlier initcalls time to probe. Do the same to avoid leaving some PDs
dangling at "on" (which actually happened on qcom!).

Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip/irq-brcmstb-l2: Add write memory barrier before exit 2024-02-23T07:12:58+00:00 Doug Berger opendmb@gmail.com 2024-02-10T01:24:49+00:00 edb943366fe91647079b58fa85781006fbfbe34a commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream. It was observed on Broadcom devices that use GIC v3 architecture L1 interrupt controllers as the parent of brcmstb-l2 interrupt controllers that the deactivation of the parent interrupt could happen before the brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the interrupt only to find that no L2 interrupt was pending. The result was a spurious interrupt invoking handle_bad_irq() with its associated messaging. While this did not create a functional problem it is a waste of cycles. The hazard exists because the memory mapped bus writes to the brcmstb-l2 registers are buffered and the GIC v3 architecture uses a very efficient system register write to deactivate the interrupt. Add a write memory barrier prior to invoking chained_irq_exit() to introduce a dsb(st) on those systems to ensure the system register write cannot be executed until the memory mapped writes are visible to the system. [ florian: Added Fixes tag ] Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream.

It was observed on Broadcom devices that use GIC v3 architecture L1
interrupt controllers as the parent of brcmstb-l2 interrupt controllers
that the deactivation of the parent interrupt could happen before the
brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the
interrupt only to find that no L2 interrupt was pending. The result was a
spurious interrupt invoking handle_bad_irq() with its associated
messaging. While this did not create a functional problem it is a waste of
cycles.

The hazard exists because the memory mapped bus writes to the brcmstb-l2
registers are buffered and the GIC v3 architecture uses a very efficient
system register write to deactivate the interrupt.

Add a write memory barrier prior to invoking chained_irq_exit() to
introduce a dsb(st) on those systems to ensure the system register write
cannot be executed until the memory mapped writes are visible to the
system.

[ florian: Added Fixes tag ]

Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box  Level-2 interrupt controller")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfp: use correct macro for LengthSelect in BAR config 2024-02-23T07:12:58+00:00 Daniel Basilio daniel.basilio@corigine.com 2024-02-02T11:37:17+00:00 09e5ae88b985524cb4f559c81b684f77cb237893 commit b3d4f7f2288901ed2392695919b3c0e24c1b4084 upstream. The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b3d4f7f2288901ed2392695919b3c0e24c1b4084 upstream.

The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.

This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.

Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: improve crystal stable clock detection 2024-02-23T07:12:57+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:29:59+00:00 d34c6d8add30a6d01f312f6ab1ba966828e882b8 commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream. Some people are seeing a warning similar to this when using a crystal: max310x 11-006c: clock is not stable yet The datasheet doesn't mention the maximum time to wait for the clock to be stable when using a crystal, and it seems that the 10ms delay in the driver is not always sufficient. Jan Kundrát reported that it took three tries (each separated by 10ms) to get a stable clock. Modify behavior to check stable clock ready bit multiple times (20), and waiting 10ms between each try. Note: the first draft of the driver originally used a 50ms delay, without checking the clock stable bit. Then a loop with 1000 retries was implemented, each time reading the clock stable bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream.

Some people are seeing a warning similar to this when using a crystal:

    max310x 11-006c: clock is not stable yet

The datasheet doesn't mention the maximum time to wait for the clock to be
stable when using a crystal, and it seems that the 10ms delay in the driver
is not always sufficient.

Jan Kundrát reported that it took three tries (each separated by 10ms) to
get a stable clock.

Modify behavior to check stable clock ready bit multiple times (20), and
waiting 10ms between each try.

Note: the first draft of the driver originally used a 50ms delay, without
checking the clock stable bit.
Then a loop with 1000 retries was implemented, each time reading the clock
stable bit.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw
Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: set default value when reading clock ready bit 2024-02-23T07:12:57+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:29:58+00:00 1b766291dda83cd077f784057c272b7c9cbd5647 commit 0419373333c2f2024966d36261fd82a453281e80 upstream. If regmap_read() returns a non-zero value, the 'val' variable can be left uninitialized. Clear it before calling regmap_read() to make sure we properly detect the clock ready bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0419373333c2f2024966d36261fd82a453281e80 upstream.

If regmap_read() returns a non-zero value, the 'val' variable can be left
uninitialized.

Clear it before calling regmap_read() to make sure we properly detect
the clock ready bit.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: iio: ad5933: fix type mismatch regression 2024-02-23T07:12:57+00:00 David Schiller david.schiller@jku.at 2024-01-22T13:49:17+00:00 4a0efde7875822485ebfd991874d454d2347e1a0 commit 6db053cd949fcd6254cea9f2cd5d39f7bd64379c upstream. Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") fixed a compiler warning, but introduced a bug that resulted in one of the two 16 bit IIO channels always being zero (when both are enabled). This is because int is 32 bits wide on most architectures and in the case of a little-endian machine the two most significant bytes would occupy the buffer for the second channel as 'val' is being passed as a void pointer to 'iio_push_to_buffers()'. Fix by defining 'val' as u16. Tested working on ARM64. Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") Signed-off-by: David Schiller <david.schiller@jku.at> Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6db053cd949fcd6254cea9f2cd5d39f7bd64379c upstream.

Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse
warning") fixed a compiler warning, but introduced a bug that resulted
in one of the two 16 bit IIO channels always being zero (when both are
enabled).

This is because int is 32 bits wide on most architectures and in the
case of a little-endian machine the two most significant bytes would
occupy the buffer for the second channel as 'val' is being passed as a
void pointer to 'iio_push_to_buffers()'.

Fix by defining 'val' as u16. Tested working on ARM64.

Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning")
Signed-off-by: David Schiller <david.schiller@jku.at>
Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
binder: signal epoll threads of self-work 2024-02-23T07:12:57+00:00 Carlos Llamas cmllamas@google.com 2024-01-31T21:53:46+00:00 dd64bb8329ce0ea27bc557e4160c2688835402ac commit 97830f3c3088638ff90b20dfba2eb4d487bf14d7 upstream. In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: Arve Hjønnevåg <arve@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Steven Moreland <smoreland@google.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97830f3c3088638ff90b20dfba2eb4d487bf14d7 upstream.

In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.

It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.

Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen-netback: properly sync TX responses 2024-02-23T07:12:56+00:00 Jan Beulich jbeulich@suse.com 2024-01-29T13:03:08+00:00 543fc0ea771528b7e2aa793bea1c46952d64d404 commit 7b55984c96ffe9e236eb9c82a2196e0b1f84990d upstream. Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7b55984c96ffe9e236eb9c82a2196e0b1f84990d upstream.

Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.

To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.

While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
  xenvif_idx_release()'s.

Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firewire: core: correct documentation of fw_csr_string() kernel API 2024-02-23T07:12:56+00:00 Takashi Sakamoto o-takashi@sakamocchi.jp 2024-02-01T11:53:18+00:00 cc9e5616a31b3054be3852d41f91592cd21f4f83 commit 5f9ab17394f831cb7986ec50900fa37507a127f1 upstream. Against its current description, the kernel API can accepts all types of directory entries. This commit corrects the documentation. Cc: stable@vger.kernel.org Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum") Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f9ab17394f831cb7986ec50900fa37507a127f1 upstream.

Against its current description, the kernel API can accepts all types of
directory entries.

This commit corrects the documentation.

Cc: stable@vger.kernel.org
Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum")
Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>