linux-stable.git/drivers, branch v4.19.306

i2c: s3c24xx: fix transferring more than one message in polling mode

2024-01-25T22:33:39+00:00

[ Upstream commit 990489e1042c6c5d6bccf56deca68f8dbeed8180 ]

To properly handle ACK on the bus when transferring more than one
message in polling mode, move the polling handling loop from
s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way
i2c_s3c_irq_nextbyte() is always executed till the end, properly
acknowledging the IRQ bits and no recursive calls to
i2c_s3c_irq_nextbyte() are made.

While touching this, also fix finishing transfers in polling mode by
using common code path and always waiting for the bus to become idle
and disabled.

Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski 
Reviewed-by: Andi Shyti 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin

i2c: s3c24xx: fix read transfers in polling mode

2024-01-25T22:33:39+00:00

[ Upstream commit 0d9cf23ed55d7ba3ab26d617a3ae507863674c8f ]

To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.

Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski 
Reviewed-by: Chanho Park 
Reviewed-by: Andi Shyti 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin

net: dsa: vsc73xx: Add null pointer check to vsc73xx_gpio_probe

2024-01-25T22:33:38+00:00

[ Upstream commit 776dac5a662774f07a876b650ba578d0a62d20db ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Signed-off-by: Kunwu Chan 
Suggested-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240111072018.75971-1-chentao@kylinos.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: ravb: Fix dma_addr_t truncation in error case

2024-01-25T22:33:38+00:00

[ Upstream commit e327b2372bc0f18c30433ac40be07741b59231c5 ]

In ravb_start_xmit(), ravb driver uses u32 variable to store result of
dma_map_single() call. Since ravb hardware has 32-bit address fields in
descriptors, this works properly when mapping is successful - it is
platform's job to provide mapping addresses that fit into hardware
limitations.

However, in failure case dma_map_single() returns DMA_MAPPING_ERROR
constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant
in u32 leads to truncation, and further call to dma_mapping_error()
fails to notice the error.

Fix that by storing result of dma_map_single() in a dma_addr_t
variable.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Nikita Yushchenko 
Reviewed-by: Niklas Söderlund 
Reviewed-by: Sergey Shtylyov 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: qualcomm: rmnet: fix global oob in rmnet_policy

2024-01-25T22:33:38+00:00

[ Upstream commit b33fb5b801c6db408b774a68e7c8722796b59ecc ]

The variable rmnet_link_ops assign a *bigger* maxtype which leads to a
global out-of-bounds read when parsing the netlink attributes. See bug
trace below:

==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207

CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G                 N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
 
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:284 [inline]
 print_report+0x172/0x475 mm/kasan/report.c:395
 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
 validate_nla lib/nlattr.c:386 [inline]
 __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
 __nla_parse+0x3e/0x50 lib/nlattr.c:697
 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline]
 __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594
 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091
 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0x154/0x190 net/socket.c:734
 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482
 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdcf2072359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000
 

The buggy address belongs to the variable:
 rmnet_policy+0x30/0xe0

The buggy address belongs to the physical page:
page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07
 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9
>ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9
                                                 ^
 ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9
 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9

According to the comment of `nla_parse_nested_deprecated`, the maxtype
should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here.

Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink")
Signed-off-by: Lin Ma 
Reviewed-by: Subash Abhinov Kasiviswanathan 
Reviewed-by: Simon Horman 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

serial: imx: Correct clock error message in function probe()

2024-01-25T22:33:38+00:00

[ Upstream commit 3e189470cad27d41a3a9dc02649f965b7ed1c90f ]

Correct the clock error message by changing the clock name.

Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails")
Signed-off-by: Christoph Niedermaier 
Reviewed-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

acpi: property: Let args be NULL in __acpi_node_get_property_reference

2024-01-25T22:33:38+00:00

[ Upstream commit bef52aa0f3de1b7d8c258c13b16e577361dabf3a ]

fwnode_get_property_reference_args() may not be called with args argument
NULL on ACPI, OF already supports this. Add the missing NULL checks and
document this.

The purpose is to be able to count the references.

Fixes: 977d5ad39f3e ("ACPI: Convert ACPI reference args to generic fwnode reference args")
Signed-off-by: Sakari Ailus 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

HID: wacom: Correct behavior when processing some confidence == false touches

2024-01-25T22:33:38+00:00

commit 502296030ec6b0329e00f9fb15018e170cc63037 upstream.

There appear to be a few different ways that Wacom devices can deal with
confidence:

  1. If the device looses confidence in a touch, it will first clear
     the tipswitch flag in one report, and then clear the confidence
     flag in a second report. This behavior is used by e.g. DTH-2452.

  2. If the device looses confidence in a touch, it will clear both
     the tipswitch and confidence flags within the same report. This
     behavior is used by some AES devices.

  3. If the device looses confidence in a touch, it will clear *only*
     the confidence bit. The tipswitch bit will remain set so long as
     the touch is tracked. This behavior may be used in future devices.

The driver does not currently handle situation 3 properly. Touches that
loose confidence will remain "in prox" and essentially frozen in place
until the tipswitch bit is finally cleared. Not only does this result
in userspace seeing a stuck touch, but it also prevents pen arbitration
from working properly (the pen won't send events until all touches are
up, but we don't currently process events from non-confident touches).

This commit centralizes the checking of the confidence bit in the
wacom_wac_finger_slot() function and has 'prox' depend on it. In the
case where situation 3 is encountered, the treat the touch as though
it was removed, allowing both userspace and the pen arbitration to
act normally.

Signed-off-by: Tatsunosuke Tobita 
Signed-off-by: Ping Cheng 
Signed-off-by: Jason Gerecke 
Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

wifi: mwifiex: configure BSSID consistently when starting AP

2024-01-25T22:33:38+00:00

commit f0dd488e11e71ac095df7638d892209c629d9af2 upstream.

AP BSSID configuration is missing at AP start.  Without this fix, FW returns
STA interface MAC address after first init.  When hostapd restarts, it gets MAC
address from netdev before driver sets STA MAC to netdev again. Now MAC address
between hostapd and net interface are different causes STA cannot connect to
AP.  After that MAC address of uap0 mlan0 become the same. And issue disappears
after following hostapd restart (another issue is AP/STA MAC address become the
same).

This patch fixes the issue cleanly.

Signed-off-by: David Lin 
Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers")
Cc: stable@vger.kernel.org
Reviewed-by: Francesco Dolcini 
Tested-by: Rafael Beims  # Verdin iMX8MP/SD8997 SD
Acked-by: Brian Norris 
Signed-off-by: Kalle Valo 
Link: https://msgid.link/20231215005118.17031-1-yu-hao.lin@nxp.com
Signed-off-by: Greg Kroah-Hartman

wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors

2024-01-25T22:33:38+00:00

commit 5894d0089cbc146063dcc0239a78ede0a8142efb upstream.

The rtlwifi driver comes with custom code to write into PCIe Link
Control register. RMW access for the Link Control register requires
locking that is already provided by the standard PCIe capability
accessors.

Convert the custom RMW code writing into LNKCTL register to standard
RMW capability accessors. The accesses are changed to cover the full
LNKCTL register instead of touching just a single byte of the register.

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman