linux-stable.git/drivers, branch v4.19.239

i2c: pasemi: Wait for write xfers to finish

2022-04-20T07:12:50+00:00

commit bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream.

Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:

 * Driver doesn't check for FIFO space.

 * The queued writes can complete while the driver is in its I2C read
   transfer path which means it will get confused by the raising of
   XEN (the 'transaction ended' signal). This can cause a spurious
   ENODATA error due to premature reading of the MRXFIFO register.

Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.

Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer 
Reviewed-by: Sven Peter 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

drivers: net: slip: fix NPD bug in sl_tx_timeout()

2022-04-20T07:12:50+00:00

[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]

When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.

   (Thread 1)                 |      (Thread 2)
                              | slip_close()
                              |   spin_lock_bh(&sl->lock)
                              |   ...
...                           |   sl->tty = NULL //(1)
sl_tx_timeout()               |   spin_unlock_bh(&sl->lock)
  spin_lock(&sl->lock);       |
  ...                         |   ...
  tty_chars_in_buffer(sl->tty)|
    if (tty->ops->..) //(2)   |
    ...                       |   synchronize_rcu()

We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).

This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.

Signed-off-by: Duoming Zhou 
Reviewed-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

scsi: mvsas: Add PCI ID of RocketRaid 2640

2022-04-20T07:12:50+00:00

[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]

The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.

Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

drm/amd/display: Fix allocate_mst_payload assert on resume

2022-04-20T07:12:49+00:00

[ Upstream commit f4346fb3edf7720db3f7f5e1cab1f667cd024280 ]

[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()

[How]
Use link type as indicator for mst link.

Reviewed-by: Wayne Lin 
Acked-by: Alex Hung 
Signed-off-by: Roman Li 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix dev_dbg frequency output

2022-04-20T07:12:49+00:00

[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]

This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.

Before:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error 0.2%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

After:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error -0.8%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

Signed-off-by: Leo Ruan 
Signed-off-by: Mark Jonas 
Reviewed-by: Philipp Zabel 
Signed-off-by: Philipp Zabel 
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
Signed-off-by: Sasha Levin

ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs

2022-04-20T07:12:49+00:00

[ Upstream commit 5399752299396a3c9df6617f4b3c907d7aa4ded8 ]

Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.

Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.

The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.

BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter 
Signed-off-by: Damien Le Moal 
Signed-off-by: Sasha Levin

net: micrel: fix KS8851_MLL Kconfig

2022-04-20T07:12:49+00:00

[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]

KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.

Fixes kconfig warning and build errors:

WARNING: unmet direct dependencies detected for MICREL_PHY
  Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
  Selected by [y]:
  - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]

ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'

Signed-off-by: Randy Dunlap 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024

2022-04-20T07:12:49+00:00

[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ]

The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.

This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.

Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: target: tcmu: Fix possible page UAF

2022-04-20T07:12:49+00:00

[ Upstream commit a6968f7a367f128d120447360734344d5a3d5336 ]

tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().

We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().

Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser 
Signed-off-by: Xiaoguang Wang 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer

2022-04-20T07:12:49+00:00

[ Upstream commit b6cae15b5710c8097aad26a2e5e752c323ee5348 ]

When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.

Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.

Signed-off-by: Michael Kelley 
Reviewed-by: Andrea Parri (Microsoft) 
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu 
Signed-off-by: Sasha Levin