linux-stable.git/drivers, branch v4.14.35

xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling

2018-04-19T06:56:21+00:00

commit 2a22ee6c3ab1d761bc9c04f1e4117edd55b82f09 upstream.

Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple
concurrent xenstore accesses") made a subtle change to the semantic of
xenbus_dev_request_and_reply() and xenbus_transaction_end().

Before on an error response to XS_TRANSACTION_END
xenbus_dev_request_and_reply() would not decrement the active
transaction counter. But xenbus_transaction_end() has always counted the
transaction as finished regardless of the response.

The new behavior is that xenbus_dev_request_and_reply() and
xenbus_transaction_end() will always count the transaction as finished
regardless the response code (handled in xs_request_exit()).

But xenbus_dev_frontend tries to end a transaction on closing of the
device if the XS_TRANSACTION_END failed before. Trying to close the
transaction twice corrupts the reference count. So fix this by also
considering a transaction closed if we have sent XS_TRANSACTION_END once
regardless of the return code.

Cc:  # 4.11
Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Signed-off-by: Simon Gaiser 
Reviewed-by: Juergen Gross 
Signed-off-by: Boris Ostrovsky 
Signed-off-by: Greg Kroah-Hartman

ath9k: Protect queue draining by rcu_read_lock()

2018-04-19T06:56:20+00:00

commit 182b1917109892ab9f26d66bfdcbc4ba6f0a0a65 upstream.

When ath9k was switched over to use the mac80211 intermediate queues,
node cleanup now drains the mac80211 queues. However, this call path is
not protected by rcu_read_lock() as it was previously entirely internal
to the driver which uses its own locking.

This leads to a possible rcu_dereference() without holding
rcu_read_lock(); but only if a station is cleaned up while having
packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the
caller in ath9k.

Fixes: 50f08edf9809 ("ath9k: Switch to using mac80211 intermediate software queues.")
Cc: stable@vger.kernel.org
Reported-by: Ben Greear 
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

hwmon: (ina2xx) Fix access to uninitialized mutex

2018-04-19T06:56:20+00:00

commit 0c4c5860e9983eb3da7a3d73ca987643c3ed034b upstream.

Initialize data->config_lock mutex before it is used by the driver code.

This fixes following warning on Odroid XU3 boards:

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x90/0xc8)
[] (dump_stack) from [] (register_lock_class+0x1c0/0x59c)
[] (register_lock_class) from [] (__lock_acquire+0x78/0x1850)
[] (__lock_acquire) from [] (lock_acquire+0xc8/0x2b8)
[] (lock_acquire) from [] (__mutex_lock+0x60/0xa0c)
[] (__mutex_lock) from [] (mutex_lock_nested+0x1c/0x24)
[] (mutex_lock_nested) from [] (ina2xx_set_shunt+0x70/0xb0)
[] (ina2xx_set_shunt) from [] (ina2xx_probe+0x88/0x1b0)
[] (ina2xx_probe) from [] (i2c_device_probe+0x1e0/0x2d0)
[] (i2c_device_probe) from [] (driver_probe_device+0x2b8/0x4a0)
[] (driver_probe_device) from [] (__driver_attach+0xfc/0x120)
[] (__driver_attach) from [] (bus_for_each_dev+0x58/0x7c)
[] (bus_for_each_dev) from [] (bus_add_driver+0x174/0x250)
[] (bus_add_driver) from [] (driver_register+0x78/0xf4)
[] (driver_register) from [] (i2c_register_driver+0x38/0xa8)
[] (i2c_register_driver) from [] (do_one_initcall+0x48/0x18c)
[] (do_one_initcall) from [] (kernel_init_freeable+0x110/0x1d4)
[] (kernel_init_freeable) from [] (kernel_init+0x8/0x114)
[] (kernel_init) from [] (ret_from_fork+0x14/0x20)

Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Marek Szyprowski 
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type

2018-04-19T06:56:20+00:00

commit 68627a697c195937672ce07683094c72b1174786 upstream.

Currently, bank 4 is reserved on Fam17h, so we chose not to initialize
bank 4 in the smca_banks array. This means that when we check if a bank
is initialized, like during boot or resume, we will see that bank 4 is
not initialized and try to initialize it.

This will cause a call trace, when resuming from suspend, due to
rdmsr_*on_cpu() calls in the init path. The rdmsr_*on_cpu() calls issue
an IPI but we're running with interrupts disabled. This triggers:

  WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0
  ...

Reserved banks will be read-as-zero, so their MCA_IPID register will be
zero. So, like the smca_banks array, the threshold_banks array will not
have an entry for a reserved bank since all its MCA_MISC* registers will
be zero.

Enumerate a "Reserved" bank type that matches on a HWID_MCATYPE of 0,0.

Use the "Reserved" type when checking if a bank is reserved. It's
possible that other bank numbers may be reserved on future systems.

Don't try to find the block address on reserved banks.

Signed-off-by: Yazen Ghannam 
Signed-off-by: Borislav Petkov 
Cc:  # 4.14.x
Cc: Borislav Petkov 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/20180221101900.10326-7-bp@alien8.de
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

rtl8187: Fix NULL pointer dereference in priv->conf_mutex

2018-04-19T06:56:19+00:00

commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream.

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
 [] (show_stack) from [] (register_lock_class+0x4f4/0x55c)
 [] (register_lock_class) from [] (__lock_acquire+0x74/0x1938)
 [] (__lock_acquire) from [] (lock_acquire+0xfc/0x23c)
 [] (lock_acquire) from [] (mutex_lock_nested+0x50/0x3b0)
 [] (mutex_lock_nested) from [] (rtl8187_start+0x2c/0xd54)
 [] (rtl8187_start) from [] (drv_start+0xa8/0x320)
 [] (drv_start) from [] (ieee80211_do_open+0x2bc/0x8e4)
 [] (ieee80211_do_open) from [] (__dev_open+0xb8/0x120)
 [] (__dev_open) from [] (__dev_change_flags+0x88/0x14c)
 [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48)
 [] (dev_change_flags) from [] (devinet_ioctl+0x738/0x840)
 [] (devinet_ioctl) from [] (sock_ioctl+0x164/0x2f4)
 [] (sock_ioctl) from [] (do_vfs_ioctl+0x8c/0x9d0)
 [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c)
 [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low

2018-04-19T06:56:19+00:00

commit bb5208b314c5127b716b2ee4f55803a8bb73b750 upstream.

Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI
resource to describe the IRQ (rather then a GpioInt resource).

These device seem to all claim the IRQ is active-high and seem to all need
a DMI quirk to treat it as active-low. Instead simply always assume that
Interrupt resource specified IRQs are always active-low.

This fixes the bt device not being able to wake the host from runtime-
suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba
Encore, without the need to add 4 new DMI quirks for these models.

This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus
T100CHI series. Likely the 2 remaining quirks can also be removed but I
could not find a DSDT of these devices to verify this.

Cc: stable@vger.kernel.org
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835
Signed-off-by: Hans de Goede 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

s390/qdio: don't merge ERROR output buffers

2018-04-19T06:56:18+00:00

commit 0cf1e05157b9e5530dcc3ca9fec9bf617fc93375 upstream.

On an Output queue, both EMPTY and PENDING buffer states imply that the
buffer is ready for completion-processing by the upper-layer drivers.

So for a non-QEBSM Output queue, get_buf_states() merges mixed
batches of PENDING and EMPTY buffers into one large batch of EMPTY
buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING
from EMPTY by inspecting the slsb_state for
QDIO_OUTBUF_STATE_FLAG_PENDING.

But the merge logic in get_buf_states() contains a bug that causes us to
erronously also merge ERROR buffers into such a batch of EMPTY buffers
(ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY).
Effectively, most outbound ERROR buffers are currently discarded
silently and processed as if they had succeeded.

Note that this affects _all_ non-QEBSM device types, not just IQD with CQ.

Fix it by explicitly spelling out the exact conditions for merging.

For extracting the "get initial state" part out of the loop, this relies
on the fact that get_buf_states() is never called with a count of 0. The
QEBSM path already strictly requires this, and the two callers with
variable 'count' make sure of it.

Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Cc:  #v3.2+
Signed-off-by: Julian Wiedmann 
Reviewed-by: Ursula Braun 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/qdio: don't retry EQBS after CCQ 96

2018-04-19T06:56:18+00:00

commit dae55b6fef58530c13df074bcc182c096609339e upstream.

Immediate retry of EQBS after CCQ 96 means that we potentially misreport
the state of buffers inspected during the first EQBS call.

This occurs when
1. the first EQBS finds all inspected buffers still in the initial state
   set by the driver (ie INPUT EMPTY or OUTPUT PRIMED),
2. the EQBS terminates early with CCQ 96, and
3. by the time that the second EQBS comes around, the state of those
   previously inspected buffers has changed.

If the state reported by the second EQBS is 'driver-owned', all we know
is that the previous buffers are driver-owned now as well. But we can't
tell if they all have the same state. So for instance
- the second EQBS reports OUTPUT EMPTY, but any number of the previous
  buffers could be OUTPUT ERROR by now,
- the second EQBS reports OUTPUT ERROR, but any number of the previous
  buffers could be OUTPUT EMPTY by now.

Effectively, this can result in both over- and underreporting of errors.

If the state reported by the second EQBS is 'HW-owned', that doesn't
guarantee that the previous buffers have not been switched to
driver-owned in the mean time. So for instance
- the second EQBS reports INPUT EMPTY, but any number of the previous
  buffers could be INPUT PRIMED (or INPUT ERROR) by now.

This would result in failure to process pending work on the queue. If
it's the final check before yielding initiative, this can cause
a (temporary) queue stall due to IRQ avoidance.

Fixes: 25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96")
Cc:  #v3.2+
Signed-off-by: Julian Wiedmann 
Reviewed-by: Benjamin Block 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

nfit: fix region registration vs block-data-window ranges

2018-04-19T06:56:18+00:00

commit 8d0d8ed3356aa9ed43b819aaedd39b08ca453007 upstream.

Commit 1cf03c00e7c1 "nfit: scrub and register regions in a workqueue"
mistakenly attempts to register a region per BLK aperture. There is
nothing to register for individual apertures as they belong as a set to
a BLK aperture group that are registered with a corresponding
DIMM-control-region. Filter them for registration to prevent some
needless devm_kzalloc() allocations.

Cc: 
Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue")
Reviewed-by: Dave Jiang 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

block/loop: fix deadlock after loop_set_status

2018-04-19T06:56:18+00:00

commit 1e047eaab3bb5564f25b41e9cd3a053009f4e789 upstream.

syzbot is reporting deadlocks at __blkdev_get() [1].

----------------------------------------
[   92.493919] systemd-udevd   D12696   525      1 0x00000000
[   92.495891] Call Trace:
[   92.501560]  schedule+0x23/0x80
[   92.502923]  schedule_preempt_disabled+0x5/0x10
[   92.504645]  __mutex_lock+0x416/0x9e0
[   92.510760]  __blkdev_get+0x73/0x4f0
[   92.512220]  blkdev_get+0x12e/0x390
[   92.518151]  do_dentry_open+0x1c3/0x2f0
[   92.519815]  path_openat+0x5d9/0xdc0
[   92.521437]  do_filp_open+0x7d/0xf0
[   92.527365]  do_sys_open+0x1b8/0x250
[   92.528831]  do_syscall_64+0x6e/0x270
[   92.530341]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[   92.931922] 1 lock held by systemd-udevd/525:
[   92.933642]  #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0
----------------------------------------

The reason of deadlock turned out that wait_event_interruptible() in
blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put()
due to q->mq_freeze_depth == 1.

----------------------------------------
[   92.787172] a.out           S12584   634    633 0x80000002
[   92.789120] Call Trace:
[   92.796693]  schedule+0x23/0x80
[   92.797994]  blk_queue_enter+0x3cb/0x540
[   92.803272]  generic_make_request+0xf0/0x3d0
[   92.807970]  submit_bio+0x67/0x130
[   92.810928]  submit_bh_wbc+0x15e/0x190
[   92.812461]  __block_write_full_page+0x218/0x460
[   92.815792]  __writepage+0x11/0x50
[   92.817209]  write_cache_pages+0x1ae/0x3d0
[   92.825585]  generic_writepages+0x5a/0x90
[   92.831865]  do_writepages+0x43/0xd0
[   92.836972]  __filemap_fdatawrite_range+0xc1/0x100
[   92.838788]  filemap_write_and_wait+0x24/0x70
[   92.840491]  __blkdev_put+0x69/0x1e0
[   92.841949]  blkdev_close+0x16/0x20
[   92.843418]  __fput+0xda/0x1f0
[   92.844740]  task_work_run+0x87/0xb0
[   92.846215]  do_exit+0x2f5/0xba0
[   92.850528]  do_group_exit+0x34/0xb0
[   92.852018]  SyS_exit_group+0xb/0x10
[   92.853449]  do_syscall_64+0x6e/0x270
[   92.854944]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[   92.943530] 1 lock held by a.out/634:
[   92.945105]  #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0
----------------------------------------

The reason of q->mq_freeze_depth == 1 turned out that loop_set_status()
forgot to call blk_mq_unfreeze_queue() at error paths for
info->lo_encrypt_type != NULL case.

----------------------------------------
[   37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G        W        4.16.0+ #457
[   37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[   37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40
[   37.521778] RSP: 0018:ffffb0c2013e7c60 EFLAGS: 00010246
[   37.524078] RAX: 0000000000000000 RBX: ffff8b07b1519798 RCX: 0000000000000000
[   37.527015] RDX: 0000000000000002 RSI: ffffb0c2013e7cc0 RDI: ffff8b07b1519798
[   37.529934] RBP: ffffb0c2013e7cc0 R08: 0000000000000008 R09: 47a189966239b898
[   37.532684] R10: dad78b99b278552f R11: 9332dca72259d5ef R12: ffff8b07acd73678
[   37.535452] R13: 0000000000004c04 R14: 0000000000000000 R15: ffff8b07b841e940
[   37.538186] FS:  00007fede33b9740(0000) GS:ffff8b07b8e80000(0000) knlGS:0000000000000000
[   37.541168] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   37.543590] CR2: 00000000206fdf18 CR3: 0000000130b30006 CR4: 00000000000606e0
[   37.546410] Call Trace:
[   37.547902]  blk_freeze_queue+0x9/0x30
[   37.549968]  loop_set_status+0x67/0x3c0 [loop]
[   37.549975]  loop_set_status64+0x3b/0x70 [loop]
[   37.549986]  lo_ioctl+0x223/0x810 [loop]
[   37.549995]  blkdev_ioctl+0x572/0x980
[   37.550003]  block_ioctl+0x34/0x40
[   37.550006]  do_vfs_ioctl+0xa7/0x6d0
[   37.550017]  ksys_ioctl+0x6b/0x80
[   37.573076]  SyS_ioctl+0x5/0x10
[   37.574831]  do_syscall_64+0x6e/0x270
[   37.576769]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
----------------------------------------

[1] https://syzkaller.appspot.com/bug?id=cd662bc3f6022c0979d01a262c318fab2ee9b56f

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Fixes: ecdd09597a572513 ("block/loop: fix race between I/O and set_status")
Cc: Ming Lei 
Cc: Dmitry Vyukov 
Cc: stable 
Cc: Jens Axboe 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman