linux-stable.git/drivers, branch v4.14.129

infiniband: fix race condition between infiniband mlx4, mlx5 driver and core dumping

2019-06-22T06:16:19+00:00

This patch is the extension of following upstream commit to fix
the race condition between get_task_mm() and core dumping
for IB->mlx4 and IB->mlx5 drivers:

commit 04f5866e41fb ("coredump: fix race condition between
mmget_not_zero()/get_task_mm() and core dumping")'

Thanks to Jason for pointing this.

Signed-off-by: Ajay Kaher 
Acked-by: Jason Gunthorpe

HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact

2019-06-22T06:16:19+00:00

commit fe7f8d73d1af19b678171170e4e5384deb57833d upstream.

The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for
indicating if the tip or eraser is in contact with the tablet. At the
moment, only the tip contact bit controls the state of the BTN_TOUCH
event. This prevents the eraser from working as expected. This commit
changes the driver to send BTN_TOUCH whenever either the tip or eraser
contact bit is set.

Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc:  # 4.11+
Signed-off-by: Jason Gerecke 
Reviewed-by: Aaron Skomra 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Greg Kroah-Hartman

HID: wacom: Don't report anything prior to the tool entering range

2019-06-22T06:16:19+00:00

commit e92a7be7fe5b2510fa60965eaf25f9e3dc08b8cc upstream.

If the tool spends some time in prox before entering range, a series of
events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace
have any clue about the pen whose data is being reported. We need to hold
off on reporting anything until the pen has entered range. Since we still
want to report events that occur "in prox" after the pen has *left* range
we use 'wacom-tool[0]' as the indicator that the pen did at one point
enter range and provide us/userspace with tool type and serial number
information.

Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc:  # 4.11+
Signed-off-by: Jason Gerecke 
Reviewed-by: Aaron Armstrong Skomra 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Greg Kroah-Hartman

HID: wacom: Don't set tool type until we're in range

2019-06-22T06:16:19+00:00

commit 2cc08800a6b9fcda7c7afbcf2da1a6e8808da725 upstream.

The serial number and tool type information that is reported by the tablet
while a pen is merely "in prox" instead of fully "in range" can be stale
and cause us to report incorrect tool information. Serial number, tool
type, and other information is only valid once the pen comes fully in range
so we should be careful to not use this information until that point.

In particular, this issue may cause the driver to incorectly report
BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.

Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc:  # 4.11+
Signed-off-by: Jason Gerecke 
Reviewed-by: Aaron Armstrong Skomra 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum: Prevent force of 56G

2019-06-22T06:16:18+00:00

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen 
Acked-by: Jiri Pirko 
Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

scsi: libsas: delete sas port if expander discover failed

2019-06-22T06:16:18+00:00

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo 
Signed-off-by: Jason Yan 
CC: John Garry 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: scsi_dh_alua: Fix possible null-ptr-deref

2019-06-22T06:16:18+00:00

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot 
Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: YueHaibing 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

2019-06-22T06:16:18+00:00

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang 
Acked-by: Don Brace 
Tested-by: Don Brace 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

2019-06-22T06:16:18+00:00

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

net: phy: dp83867: Set up RGMII TX delay

2019-06-22T06:16:18+00:00

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov 
Cc: Florian Fainelli 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin