linux-stable.git/drivers, branch v3.4.94

ahci: Add Device ID for HighPoint RocketRaid 642L

2014-06-16T20:45:46+00:00

commit d251836508fb26cd1a22b41381739835ee23728d upstream.

This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
 http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

Signed-off-by: Jérôme Carretero 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

SCSI: megaraid: Use resource_size_t for PCI resources, not long

2014-06-16T20:45:46+00:00

commit 11f8a7b31f2140b0dc164bb484281235ffbe51d3 upstream.

The assumption that sizeof(long) >= sizeof(resource_size_t) can lead to
truncation of the PCI resource address, meaning this driver didn't work
on 32-bit systems with 64-bit PCI adressing ranges.

Signed-off-by: Ben Collins 
Acked-by: Sumit Saxena 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

Staging: zram: Fix memory leak by refcount mismatch

2014-06-16T20:45:45+00:00

commit 1b672224d128ec2570eb37572ff803cfe452b4f7 upstream.

As suggested by Minchan Kim and Jerome Marchand "The code in reset_store
get the block device (bdget_disk()) but it does not put it (bdput()) when
it's done using it. The usage count is therefore incremented but never
decremented."

This patch also puts bdput() for all error cases.

Acked-by: Minchan Kim 
Acked-by: Jerome Marchand 
Signed-off-by: Rashika Kheria 
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings 
[wyj: Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

zram: protect sysfs handler from invalid memory access

2014-06-16T20:45:45+00:00

commit 5863e10b441e7ea4b492f930f1be180a97d026f3 upstream.

Use zram->init_lock to protect access to zram->meta, otherwise it
may cause invalid memory access if zram->meta has been freed by
zram_reset_device().

This issue may be triggered by:
Thread 1:
while true; do cat mem_used_total; done
Thread 2:
while true; do echo 8M > disksize; echo 1 > reset; done

Signed-off-by: Jiang Liu 
Acked-by: Minchan Kim 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
[wyj: Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll

2014-06-16T20:45:45+00:00

commit c98235cb8584a72e95786e17d695a8e5fafcd766 upstream.

The mlx4 driver is triggering schedules while atomic inside
mlx4_en_netpoll:

	spin_lock_irqsave(&cq->lock, flags);
	napi_synchronize(&cq->napi);
		^^^^^ msleep here
	mlx4_en_process_rx_cq(dev, cq, 0);
	spin_unlock_irqrestore(&cq->lock, flags);

This was part of a patch by Alexander Guller from Mellanox in 2011,
but it still isn't upstream.

Signed-off-by: Chris Mason 
Acked-By: Amir Vadai 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby 
Cc: Masoud Sharbiani 
Signed-off-by: Greg Kroah-Hartman

tty/serial: Add support for Altera serial port

2014-06-11T19:04:22+00:00

commit e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 upstream.

Add support for Altera 8250/16550 compatible serial port.

Signed-off-by: Ley Foon Tan 
[xr: Backported to 3.4: adjust filenames, context]
Signed-off-by: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

8250/16?50: Add support for Broadcom TruManage redirected serial port

2014-06-11T19:04:22+00:00

commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.

Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).

This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts.  The UART_CAP_HFIFO
capability was added to track this.  It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).

Signed-off-by: Stephen Hurd 
Signed-off-by: Michael Chan 
[xr: Backported to 3.4:
 - Adjust filenames
 - Adjust context
 - PORT_BRCM_TRUMANAGE is 22 not 24]
Cc: Ben Hutchings 
Signed-off-by: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards

2014-06-11T19:04:21+00:00

commit d13402a4a944e72612a9ec5c9190e35717c02a9d upstream.

I've managed to find an 8 port version of the card 4 port card which was discussed here:

http://marc.info/?l=linux-serial&m=120760744205314&w=2

Looking back at that thread there were two issues in the original patch.

1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post.
2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return.

This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card.

$ lspci -vvv -n -s 00:08.0
00:08.0 0780: 10b5:9050 (rev 01)
	Subsystem: 10b5:1588
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 
	Kernel driver in use: serial

$ dmesg | grep 0000:00:08.0:
[    0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780
[    0.083355] pci 0000:00:08.0: reg 14: [io  0xff00-0xff7f]
[    0.083369] pci 0000:00:08.0: reg 18: [io  0xfe00-0xfe3f]
[    0.083382] pci 0000:00:08.0: reg 1c: [io  0xfd00-0xfd07]
[    0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot
[    1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A
[    1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A
[    1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A
[    1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A
[    1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A
[    1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A
[    1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A
[    1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A

Signed-off-by: Scott Ashcroft 
[xr: Backported to 3.4: adjust context]
Signed-off-by: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

tty: Correct tty buffer flush.

2014-06-11T19:04:21+00:00

commit 64325a3be08d364a62ee8f84b2cf86934bc2544a upstream.

  The root of problem is carelessly zeroing pointer(in function __tty_buffer_flush()),
when another thread can use it. It can be cause of "NULL pointer dereference".
  Main idea of the patch, this is never free last (struct tty_buffer) in the active buffer.
Only flush the data for ldisc(buf->head->read = buf->head->commit).
At that moment driver can collect(write) data in buffer without conflict.
It is repeat behavior of flush_to_ldisc(), only without feeding data to ldisc.

Signed-off-by: Ilya Zykov 
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix tty-kref leak in rx-error path

2014-06-11T19:04:21+00:00

commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream.

Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a
deadlock when pch_uart as console") which never put its tty reference.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman