linux-stable.git/drivers, branch v3.4.111 Linux kernel stable tree dm btree remove: fix a bug when rebalancing nodes after removal 2016-03-21T01:17:58+00:00 Joe Thornber ejt@redhat.com 2015-10-21T17:36:49+00:00 24fa51bde52b3671afa476c96d63bcf8a4e8a307 commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream. Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream.

Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().

The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them.  If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.

Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.

Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
usb: dwc3: Fix assignment of EP transfer resources 2016-03-21T01:17:58+00:00 John Youn John.Youn@synopsys.com 2016-02-17T04:10:53+00:00 f43d490b4ce93037cb7cb8524abfc9a6accbbb29 commit c450960187f45d4260db87c7dd4fc0bceb5565d8 upstream. The assignement of EP transfer resources was not handled properly in the dwc3 driver. Commit aebda6187181 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE") previously fixed one aspect of this where resources may be exhausted with multiple calls to SET_INTERFACE. However, it introduced an issue where composite devices with multiple interfaces can be assigned the same transfer resources for different endpoints. This patch solves both issues. The assignment of transfer resources cannot perfectly follow the data book due to the fact that the controller driver does not have all knowledge of the configuration in advance. It is given this information piecemeal by the composite gadget framework after every SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook programming model in this scenario can cause errors. For two reasons: 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION and SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple interfaces. 2) The databook does not mention doing more DEPXFERCFG for new endpoint on alt setting (8.1.6). The following simplified method is used instead: All hardware endpoints can be assigned a transfer resource and this setting will stay persistent until either a core reset or hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and do DEPXFERCFG for every hardware endpoint as well. We are guaranteed that there are as many transfer resources as endpoints. This patch triggers off of the calling dwc3_gadget_start_config() for EP0-out, which always happens first, and which should only happen in one of the above conditions. Fixes: aebda6187181 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE") Reported-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> [lizf: Backported to 3.4: adjust context] Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit c450960187f45d4260db87c7dd4fc0bceb5565d8 upstream.

The assignement of EP transfer resources was not handled properly in the
dwc3 driver. Commit aebda6187181 ("usb: dwc3: Reset the transfer
resource index on SET_INTERFACE") previously fixed one aspect of this
where resources may be exhausted with multiple calls to SET_INTERFACE.
However, it introduced an issue where composite devices with multiple
interfaces can be assigned the same transfer resources for different
endpoints. This patch solves both issues.

The assignment of transfer resources cannot perfectly follow the data
book due to the fact that the controller driver does not have all
knowledge of the configuration in advance. It is given this information
piecemeal by the composite gadget framework after every
SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
programming model in this scenario can cause errors. For two reasons:

1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION and
SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple
interfaces.

2) The databook does not mention doing more DEPXFERCFG for new endpoint
on alt setting (8.1.6).

The following simplified method is used instead:

All hardware endpoints can be assigned a transfer resource and this
setting will stay persistent until either a core reset or hibernation.
So whenever we do a DEPSTARTCFG(0) we can go ahead and do DEPXFERCFG for
every hardware endpoint as well. We are guaranteed that there are as
many transfer resources as endpoints.

This patch triggers off of the calling dwc3_gadget_start_config() for
EP0-out, which always happens first, and which should only happen in one
of the above conditions.

Fixes: aebda6187181 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE")
Reported-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
USB: whiteheat: fix potential null-deref at probe 2016-03-21T01:17:54+00:00 Johan Hovold johan@kernel.org 2015-09-23T18:41:42+00:00 04d6387f6f3f1727abd3e8f77686efd125c5f691 commit cbb4be652d374f64661137756b8f357a1827d6a4 upstream. Fix potential null-pointer dereference at probe by making sure that the required endpoints are present. The whiteheat driver assumes there are at least five pairs of bulk endpoints, of which the final pair is used for the "command port". An attempt to bind to an interface with fewer bulk endpoints would currently lead to an oops. Fixes CVE-2015-5257. Reported-by: Moein Ghasemzadeh <moein@istuary.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit cbb4be652d374f64661137756b8f357a1827d6a4 upstream.

Fix potential null-pointer dereference at probe by making sure that the
required endpoints are present.

The whiteheat driver assumes there are at least five pairs of bulk
endpoints, of which the final pair is used for the "command port". An
attempt to bind to an interface with fewer bulk endpoints would
currently lead to an oops.

Fixes CVE-2015-5257.

Reported-by: Moein Ghasemzadeh <moein@istuary.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
ppp, slip: Validate VJ compression slot parameters completely 2016-03-21T01:17:54+00:00 Ben Hutchings ben@decadent.org.uk 2015-11-01T16:22:53+00:00 a1c3860d3c5fc62bd35f089bcb03f18a37242de9 commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae upstream. Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by: 郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae upstream.

Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).

Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL.  Change the callers accordingly.

Compile-tested only.

Reported-by: 郭永刚 <guoyonggang@360.cn>
References: http://article.gmane.org/gmane.comp.security.oss.general/17908
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
isdn_ppp: Add checks for allocation failure in isdn_ppp_open() 2016-03-21T01:17:54+00:00 Ben Hutchings ben@decadent.org.uk 2015-11-01T16:21:24+00:00 76e4831f5faf482ce5c11acb1b09cee3c88f34e1 commit 0baa57d8dc32db78369d8b5176ef56c5e2e18ab3 upstream. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 0baa57d8dc32db78369d8b5176ef56c5e2e18ab3 upstream.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
virtio-net: drop NETIF_F_FRAGLIST 2016-03-21T01:17:54+00:00 Jason Wang jasowang@redhat.com 2015-08-05T02:34:04+00:00 35464982a0fb1dcaf540c4dd5564de3f90f7a1a5 commit 48900cb6af4282fa0fb6ff4d72a81aa3dadb5c39 upstream. virtio declares support for NETIF_F_FRAGLIST, but assumes that there are at most MAX_SKB_FRAGS + 2 fragments which isn't always true with a fraglist. A longer fraglist in the skb will make the call to skb_to_sgvec overflow the sg array, leading to memory corruption. Drop NETIF_F_FRAGLIST so we only get what we can handle. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 48900cb6af4282fa0fb6ff4d72a81aa3dadb5c39 upstream.

virtio declares support for NETIF_F_FRAGLIST, but assumes
that there are at most MAX_SKB_FRAGS + 2 fragments which isn't
always true with a fraglist.

A longer fraglist in the skb will make the call to skb_to_sgvec overflow
the sg array, leading to memory corruption.

Drop NETIF_F_FRAGLIST so we only get what we can handle.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
sg_start_req(): make sure that there's not too many elements in iovec 2016-03-21T01:17:54+00:00 Al Viro viro@zeniv.linux.org.uk 2015-03-22T00:08:18+00:00 26aa430b96d8ccc619616c0a5e60a654be4931eb commit 451a2886b6bf90e2fb378f7c46c655450fb96e81 upstream. unfortunately, allowing an arbitrary 16bit value means a possibility of overflow in the calculation of total number of pages in bio_map_user_iov() - we rely on there being no more than PAGE_SIZE members of sum in the first loop there. If that sum wraps around, we end up allocating too small array of pointers to pages and it's easy to overflow it in the second loop. X-Coverup: TINC (and there's no lumber cartel either) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [lizf: Backported to 3.4: s/MAX_UIOVEC/UIO_MAXIOV] Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 451a2886b6bf90e2fb378f7c46c655450fb96e81 upstream.

unfortunately, allowing an arbitrary 16bit value means a possibility of
overflow in the calculation of total number of pages in bio_map_user_iov() -
we rely on there being no more than PAGE_SIZE members of sum in the
first loop there.  If that sum wraps around, we end up allocating
too small array of pointers to pages and it's easy to overflow it in
the second loop.

X-Coverup: TINC (and there's no lumber cartel either)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[lizf: Backported to 3.4: s/MAX_UIOVEC/UIO_MAXIOV]
Signed-off-by: Zefan Li <lizefan@huawei.com>
pptp: verify sockaddr_len in pptp_bind() and pptp_connect() 2016-03-21T01:17:53+00:00 WANG Cong xiyou.wangcong@gmail.com 2015-12-14T21:48:36+00:00 0cf0ae366ff94870075cbe0a8f3a16a2107ae853 commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 upstream. Reported-by: Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 upstream.

Reported-by: Dmitry Vyukov <dvyukov@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Revert "usb: dwc3: Reset the transfer resource index on SET_INTERFACE" 2016-03-21T01:17:53+00:00 Zefan Li lizefan@huawei.com 2016-03-03T07:44:47+00:00 44b2ffc5ed1e7c6b96f103bdbbfda23fed07b18d It was applied to the wrong function. This reverts commit 15488de7b72b6ab8254dda07053faa4be6b9ec66. 
It was applied to the wrong function.

This reverts commit 15488de7b72b6ab8254dda07053faa4be6b9ec66.
EDAC, ppc4xx: Access mci->csrows array elements properly 2016-03-21T01:17:52+00:00 Michael Walle michael@walle.cc 2015-07-21T09:00:53+00:00 1d275d96b1b3f8672c3c6cba73d9b140599ecac2 commit 5c16179b550b9fd8114637a56b153c9768ea06a5 upstream. The commit de3910eb79ac ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 5c16179b550b9fd8114637a56b153c9768ea06a5 upstream.

The commit

  de3910eb79ac ("edac: change the mem allocation scheme to
		 make Documentation/kobject.txt happy")

changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>