linux-stable.git/drivers, branch v3.4.102

scsi: handle flush errors properly

2014-08-07T19:00:10+00:00

commit 89fb4cd1f717a871ef79fa7debbe840e3225cd54 upstream.

Flush commands don't transfer data and thus need to be special cased
in the I/O completion handler so that we can propagate errors to
the block layer and filesystem.

Signed-off-by: James Bottomley 
Reported-by: Steven Haber 
Tested-by: Steven Haber 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

2014-07-31T19:54:52+00:00

commit b32bfc06aefab61acc872dec3222624e6cd867ed upstream.

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez 
Tested-by: Romain Degez 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: introduce ata_host->n_tags to avoid oops on SAS controllers

2014-07-31T19:54:51+00:00

commit 1a112d10f03e83fb3a2fdc4c9165865dec8a3ca6 upstream.

1871ee134b73 ("libata: support the ata host which implements a queue
depth less than 32") directly used ata_port->scsi_host->can_queue from
ata_qc_new() to determine the number of tags supported by the host;
unfortunately, SAS controllers doing SATA don't initialize ->scsi_host
leading to the following oops.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [] ata_qc_new_init+0x188/0x1b0
 PGD 0
 Oops: 0002 [#1] SMP
 Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm
 CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62
 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000
 RIP: 0010:[]  [] ata_qc_new_init+0x188/0x1b0
 RSP: 0018:ffff88061a003ae8  EFLAGS: 00010012
 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa
 RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298
 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200
 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000
 FS:  00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0
 Stack:
  ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200
  ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68
  ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80
 Call Trace:
  [] ata_sas_queuecmd+0xa1/0x430
  [] sas_queuecommand+0x191/0x220 [libsas]
  [] scsi_dispatch_cmd+0x10e/0x300 [] scsi_request_fn+0x2f5/0x550
  [] __blk_run_queue+0x33/0x40
  [] queue_unplugged+0x2a/0x90
  [] blk_flush_plug_list+0x1b4/0x210
  [] blk_finish_plug+0x14/0x50
  [] __do_page_cache_readahead+0x198/0x1f0
  [] force_page_cache_readahead+0x31/0x50
  [] page_cache_sync_readahead+0x3e/0x50
  [] generic_file_read_iter+0x496/0x5a0
  [] blkdev_read_iter+0x37/0x40
  [] new_sync_read+0x7e/0xb0
  [] vfs_read+0x94/0x170
  [] SyS_read+0x46/0xb0
  [] ? SyS_lseek+0x91/0xb0
  [] system_call_fastpath+0x16/0x1b
 Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00

Fix it by introducing ata_host->n_tags which is initialized to
ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to
scsi_host_template->can_queue in ata_host_register() for !SAS ones.
As SAS hosts are never registered, this will give them the same
ATA_MAX_QUEUE - 1 as before.  Note that we can't use
scsi_host->can_queue directly for SAS hosts anyway as they can go
higher than the libata maximum.

Signed-off-by: Tejun Heo 
Reported-by: Mike Qiu 
Reported-by: Jesse Brandeburg 
Reported-by: Peter Hurley 
Reported-by: Peter Zijlstra 
Tested-by: Alexey Kardashevskiy 
Fixes: 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32")
Cc: Kevin Hao 
Cc: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

libata: support the ata host which implements a queue depth less than 32

2014-07-31T19:54:51+00:00

commit 1871ee134b73fb4cadab75752a7152ed2813c751 upstream.

The sata on fsl mpc8315e is broken after the commit 8a4aeec8d2d6
("libata/ahci: accommodate tag ordered controllers"). The reason is
that the ata controller on this SoC only implement a queue depth of
16. When issuing the commands in tag order, all the commands in tag
16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata
malfunction. It makes no senses to use a 32 queue in software while
the hardware has less queue depth. So consider the queue depth
implemented by the hardware when requesting a command tag.

Fixes: 8a4aeec8d2d6 ("libata/ahci: accommodate tag ordered controllers")
Signed-off-by: Kevin Hao 
Acked-by: Dan Williams 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Disable translation if already enabled

2014-07-28T14:06:46+00:00

commit 3a93c841c2b3b14824f7728dd74bd00a1cedb806 upstream.

This patch disables translation(dma-remapping) before its initialization
if it is already enabled.

This is needed for kexec/kdump boot. If dma-remapping is enabled in the
first kernel, it need to be disabled before initializing its page table
during second kernel boot. Wei Hu also reported that this is needed
when second kernel boots with intel_iommu=off.

Basically iommu->gcmd is used to know whether translation is enabled or
disabled, but it is always zero at boot time even when translation is
enabled since iommu->gcmd is initialized without considering such a
case. Therefor this patch synchronizes iommu->gcmd value with global
command register when iommu structure is allocated.

Signed-off-by: Takao Indoh 
Signed-off-by: Joerg Roedel 
[wyj: Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: avoid leaking edid data

2014-07-28T14:06:46+00:00

commit 0ac66effe7fcdee55bda6d5d10d3372c95a41920 upstream.

In some cases we fetch the edid in the detect() callback
in order to determine what sort of monitor is connected.
If that happens, don't fetch the edid again in the get_modes()
callback or we will leak the edid.

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

mwifiex: fix Tx timeout issue

2014-07-28T14:06:46+00:00

commit d76744a93246eccdca1106037e8ee29debf48277 upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=70191
https://bugzilla.kernel.org/show_bug.cgi?id=77581

It is observed that sometimes Tx packet is downloaded without
adding driver's txpd header. This results in firmware parsing
garbage data as packet length. Sometimes firmware is unable
to read the packet if length comes out as invalid. This stops
further traffic and timeout occurs.

The root cause is uninitialized fields in tx_info(skb->cb) of
packet used to get garbage values. In this case if
MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd
header was skipped. This patch makes sure that tx_info is
correctly initialized to fix the problem.

Reported-by: Andrew Wiley 
Reported-by: Linus Gasser 
Reported-by: Michael Hirsch 
Tested-by: Xinming Hu 
Signed-off-by: Amitkumar Karwar 
Signed-off-by: Maithili Hinge 
Signed-off-by: Avinash Patil 
Signed-off-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

sunvnet: clean up objects created in vnet_new() on vnet_exit()

2014-07-28T14:06:45+00:00

[ Upstream commit a4b70a07ed12a71131cab7adce2ce91c71b37060 ]

Nothing cleans up the objects created by
vnet_new(), they are completely leaked.

vnet_exit(), after doing the vio_unregister_driver() to clean
up ports, should call a helper function that iterates over vnet_list
and cleans up those objects. This includes unregister_netdevice()
as well as free_netdev().

Signed-off-by: Sowmini Varadhan 
Acked-by: Dave Kleikamp 
Reviewed-by: Karl Volz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: pppoe: use correct channel MTU when using Multilink PPP

2014-07-28T14:06:45+00:00

[ Upstream commit a8a3e41c67d24eb12f9ab9680cbb85e24fcd9711 ]

The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see
ppp_generic module) tries to determine how big a fragment might be. According
to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the
corresponding comment and code in ppp_mp_explode():

		/*
		 * hdrlen includes the 2-byte PPP protocol field, but the
		 * MTU counts only the payload excluding the protocol field.
		 * (RFC1661 Section 2)
		 */
		mtu = pch->chan->mtu - (hdrlen - 2);

However, the pppoe module *does* include the PPP protocol field in the channel
MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under
certain circumstances (one byte if PPP protocol compression is used, two
otherwise), causing the generated Ethernet packets to be dropped. So the pppoe
module has to subtract two bytes from the channel MTU. This error only
manifests itself when using Multilink PPP, as otherwise the channel MTU is not
used anywhere.

In the following, I will describe how to reproduce this bug. We configure two
pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with
a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is
computed by adding the two link MTUs and subtracting the MP header twice, which
is 4 bytes long.) The necessary pppd statements on both sides are "multilink
mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin
rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server
side, we additionally need to start two pppoe-server instances to be able to
establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU
of the PPP network interface to the MRRU (2976) on both sides of the connection
in order to make use of the higher bandwidth. (If we didn't do that, IP
fragmentation would kick in, which we want to avoid.)

Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to
server over the PPP link. This results in the following network packet:

   2948 (echo payload)
 +    8 (ICMPv4 header)
 +   20 (IPv4 header)
---------------------
   2976 (PPP payload)

These 2976 bytes do not exceed the MTU of the PPP network interface, so the
IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode()
prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger
than the negotiated MRRU. So this packet would have to be divided in three
fragments. But this does not happen as each link MTU is assumed to be two bytes
larger. So this packet is diveded into two fragments only, one of size 1489 and
one of size 1488. Now we have for that bigger fragment:

   1489 (PPP payload)
 +    4 (MP header)
 +    2 (PPP protocol field for the MP payload (0x3d))
 +    6 (PPPoE header)
--------------------------
   1501 (Ethernet payload)

This packet exceeds the link MTU and is discarded.

If one configures the link MTU on the client side to 1501, one can see the
discarded Ethernet frames with tcpdump running on the client. A

ping -s 2948 -c 1 192.168.15.254

leads to the smaller fragment that is correctly received on the server side:

(tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d)
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [end], length 1492

and to the bigger fragment that is not received on the server side:

(tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d)
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1515: PPPoE  [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000,
  Flags [begin], length 1493

With the patch below, we correctly obtain three fragments:

52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [begin], length 1492
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [none], length 1492
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 27: PPPoE  [ses 0x1] MLPPP (0x003d), length 7: seq 0x000,
  Flags [end], length 5

And the ICMPv4 echo request is successfully received at the server side:

IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1),
  length 2976)
    192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0,
      length 2956

The bug was introduced in commit c9aa6895371b2a257401f59d3393c9f7ac5a8698
("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies
to 3.10 upwards but the fix can be applied (with minor modifications) to
kernels as old as 2.6.32.

Signed-off-by: Christoph Schulz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

be2net: set EQ DB clear-intr bit in be_open()

2014-07-28T14:06:45+00:00

[ Upstream commit 4cad9f3b61c7268fa89ab8096e23202300399b5d ]

On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first
time it is armed, ocassionally we have observed that the EQ doesn't raise
anymore interrupts even if it is in armed state.
This patch fixes this by setting the clear-interrupt bit when EQs are
armed for the first time in be_open().

Signed-off-by: Suresh Reddy 
Signed-off-by: Sathya Perla 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman