linux-stable.git/drivers, branch v3.2.80

jme: Fix device PM wakeup API usage

2016-04-30T22:05:28+00:00

commit 81422e672f8181d7ad1ee6c60c723aac649f538f upstream.

According to Documentation/power/devices.txt

The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.

Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.

And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.

Reported-by: Diego Viola 
Signed-off-by: Guo-Fu Tseng 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

jme: Do not enable NIC WoL functions on S0

2016-04-30T22:05:27+00:00

commit 0772a99b818079e628a1da122ac7ee023faed83e upstream.

Otherwise it might be back on resume right after going to suspend in
some hardware.

Reported-by: Diego Viola 
Signed-off-by: Guo-Fu Tseng 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

qlge: Fix receive packets drop.

2016-04-30T22:05:27+00:00

[ Upstream commit 2c9a266afefe137bff06bbe0fc48b4d3b3cb348c ]

When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.

Signed-off-by: Sony Chacko 
Signed-off-by: Manish Chopra 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

farsync: fix off-by-one bug in fst_add_one

2016-04-30T22:05:27+00:00

[ Upstream commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 ]

gcc-6 finds an out of bounds access in the fst_add_one function
when calculating the end of the mmio area:

drivers/net/wan/farsync.c: In function 'fst_add_one':
drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds]
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                                     ^
include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof'
  __builtin_offsetof(a, b)
                     ^
drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof'
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                     ^~~~~~~~
drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET'
                                  + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]);
                                    ^~~~~~~~~~

The warning is correct, but not critical because this appears
to be a write-only variable that is set by each WAN driver but
never accessed afterwards.

I'm taking the minimal fix here, using the correct pointer by
pointing 'mem_end' to the last byte inside of the register area
as all other WAN drivers do, rather than the first byte outside of
it. An alternative would be to just remove the mem_end member
entirely.

Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

macvtap: always pass ethernet header in linear

2016-04-30T22:05:27+00:00

[ Upstream commit 8e2ad4113ce4671686740f808ff2795395c39eef ]

The stack expects link layer headers in the skb linear section.
Macvtap can create skbs with llheader in frags in edge cases:
when (IFF_VNET_HDR is off or vnet_hdr.hdr_len < ETH_HLEN) and
prepad + len > PAGE_SIZE and vnet_hdr.flags has no or bad csum.

Add checks to ensure linear is always at least ETH_HLEN.
At this point, len is already ensured to be >= ETH_HLEN.

For backwards compatiblity, rounds up short vnet_hdr.hdr_len.
This differs from tap and packet, which return an error.

Fixes b9fb9ee07e67 ("macvtap: add GSO/csum offload support")
Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: don't use macvtap16_to_cpu()]
Signed-off-by: Ben Hutchings

sh_eth: fix NULL pointer dereference in sh_eth_ring_format()

2016-04-30T22:05:27+00:00

[ Upstream commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 ]

In a low memory situation, if netdev_alloc_skb() fails on a first RX ring
loop iteration  in sh_eth_ring_format(), 'rxdesc' is still NULL.  Avoid
kernel oops by adding the 'rxdesc' check after the loop.

Reported-by: Wolfram Sang 
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

cdc_ncm: toggle altsetting to force reset before setup

2016-04-30T22:05:26+00:00

[ Upstream commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 ]

Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time.  Briefly toggling the altsetting forces a function
reset regardless of the initial state.

This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: hard-code 1 for data_altsetting]
Signed-off-by: Ben Hutchings

net: jme: fix suspend/resume on JMC260

2016-04-30T22:05:26+00:00

[ Upstream commit ee50c130c82175eaa0820c96b6d3763928af2241 ]

The JMC260 network card fails to suspend/resume because the call to
jme_start_irq() was too early, moving the call to jme_start_irq() after
the call to jme_reset_link() makes it work.

Prior this change suspend/resume would fail unless /sys/power/pm_async=0
was explicitly specified.

Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351

Signed-off-by: Diego Viola 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock

2016-04-30T22:05:26+00:00

commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream.

The BSP team noticed that there is spin/mutex lock issue on sh-sci when
CPUFREQ is used.  The issue is that the notifier function may call
mutex_lock() while the spinlock is held, which can lead to a BUG().
This may happen if CPUFREQ is changed while another CPU calls
clk_get_rate().

Taking the spinlock was added to the notifier function in commit
e552de2413edad1a ("sh-sci: add platform device private data"), to
protect the list of serial ports against modification during traversal.
At that time the Common Clock Framework didn't exist yet, and
clk_get_rate() just returned clk->rate without taking a mutex.
Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a
device per port mapping."), there's no longer a list of serial ports to
traverse, and taking the spinlock became superfluous.

To fix the issue, just remove the cpufreq notifier:
  1. The notifier doesn't work correctly: all it does is update the
     stored clock rate; it does not update the divider in the hardware.
     The divider will only be updated when calling sci_set_termios().
     I believe this was broken back in 2004, when the old
     drivers/char/sh-sci.c driver (where the notifier did update the
     divider) was replaced by drivers/serial/sh-sci.c (where the
     notifier just updated port->uartclk).
     Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port
     sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH]
     Remove old sh-sci driver").
  2. On modern SoCs, the sh-sci parent clock rate is no longer related
     to the CPU clock rate anyway, so using a cpufreq notifier is
     futile.

Signed-off-by: Geert Uytterhoeven 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

pppoe: fix reference counting in PPPoE proxy

2016-04-30T22:05:25+00:00

[ Upstream commit 29e73269aa4d36f92b35610c25f8b01c789b0dc8 ]

Drop reference on the relay_po socket when __pppoe_xmit() succeeds.
This is already handled correctly in the error path.

Signed-off-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings