linux-stable.git/drivers, branch v3.2.43

HID: microsoft: do not use compound literal - fix build

2013-04-10T02:20:16+00:00

commit 6b90466cfec2a2fe027187d675d8d14217c12d82 upstream.

In patch "HID: microsoft: fix invalid rdesc for 3k kbd" I fixed
support for MS 3k keyboards. However the added check using memcmp and
a compound statement breaks build on architectures where memcmp is a
macro with parameters.

hid-microsoft.c:51:18: error: macro "memcmp" passed 6 arguments, but takes just 3

On x86_64, memcmp is a function, so I did not see the error.

Signed-off-by: Jiri Slaby 
Reported-by: Geert Uytterhoeven 
Signed-off-by: Jiri Kosina 
Signed-off-by: Ben Hutchings

bonding: get netdev_rx_handler_unregister out of locks

2013-04-10T02:20:16+00:00

commit fcd99434fb5c137274d2e15dd2a6a7455f0f29ff upstream.

Now that netdev_rx_handler_unregister contains synchronize_net(), we need
to call it outside of bond->lock, cause it might sleep. Also, remove the
already unneded synchronize_net().

Signed-off-by: Veaceslav Falico 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

smsc75xx: fix jumbo frame support

2013-04-10T02:20:16+00:00

[ Upstream commit 4c51e53689569398d656e631c17308d9b8e84650 ]

This patch enables RX of jumbo frames for LAN7500.

Previously the driver would transmit jumbo frames succesfully but
would drop received jumbo frames (incrementing the interface errors
count).

With this patch applied the device can succesfully receive jumbo
frames up to MTU 9000 (9014 bytes on the wire including ethernet
header).

Signed-off-by: Steve Glendinning 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

pch_gbe: fix ip_summed checksum reporting on rx

2013-04-10T02:20:15+00:00

[ Upstream commit 76a0e68129d7d24eb995a6871ab47081bbfa0acc ]

skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that
checksums were correct and CHECKSUM_NONE in any other case. They're
currently placed vice versa, which breaks the forwarding scenario. Fix it
by placing them as described above.

Signed-off-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ks8851: Fix interpretation of rxlen field.

2013-04-10T02:20:15+00:00

[ Upstream commit 14bc435ea54cb888409efb54fc6b76c13ef530e9 ]

According to the Datasheet (page 52):
15-12 Reserved
11-0 RXBC Receive Byte Count
This field indicates the present received frame byte size.

The code has a bug:
                 rxh = ks8851_rdreg32(ks, KS_RXFHSR);
                 rxstat = rxh & 0xffff;
                 rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied

Signed-off-by: Max Nekludov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

DM9000B: driver initialization upgrade

2013-04-10T02:20:14+00:00

[ Upstream commit 6741f40d198c6a5feb23653a1efd4ca47f93d83d ]

Fix bug for DM9000 revision B which contain a DSP PHY

DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY,
So need extra change in initialization, For
explicity PHY Reset and PHY init parameter, and
first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe().

Following DM9000_NCR reset cause by dm9000_open() clear the
NCR_MAC_LBK bit.

Without this fix, Power-up FIFO pointers error happen around 2%
rate among Davicom's customers' boards. With this fix, All above
cases can be solved.

Signed-off-by: Joseph CHANG 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

atl1e: drop pci-msi support because of packet corruption

2013-04-10T02:20:13+00:00

[ Upstream commit 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 ]

Usage of pci-msi results in corrupted dma packet transfers to the host.

Reported-by: rebelyouth 
Cc: Huang, Xiong 
Tested-by: Christian Sünkenberg 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

aoe: reserve enough headroom on skbs

2013-04-10T02:20:13+00:00

[ Upstream commit 91c5746425aed8f7188a351f1224a26aa232e4b3 ]

Some network drivers use a non default hard_header_len

Transmitted skb should take into account dev->hard_header_len, or risk
crashes or expensive reallocations.

In the case of aoe, lets reserve MAX_HEADER bytes.

David reported a crash in defxx driver, solved by this patch.

Reported-by: David Oostdyk 
Tested-by: David Oostdyk 
Signed-off-by: Eric Dumazet 
Cc: Ed Cashin 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue

2013-04-10T02:20:13+00:00

commit 7e51cde276ca820d526c6c21cf8147df595a36bf upstream.

To restart tx queue use netif_wake_queue() intead of netif_start_queue()
so that net schedule will restart transmission immediately which will
increase network performance while doing huge data transfers.

Reported-by: Dan Franke 
Suggested-by: Sriramakrishnan A G 
Signed-off-by: Mugunthan V N 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

bonding: fix disabling of arp_interval and miimon

2013-04-10T02:20:12+00:00

[ Upstream commit 1bc7db16782c2a581fb4d53ca853631050f31611 ]

Currently if either arp_interval or miimon is disabled, they both get
disabled, and upon disabling they get executed once more which is not
the proper behaviour. Also when doing a no-op and disabling an already
disabled one, the other again gets disabled.
Also fix the error messages with the proper valid ranges, and a small
typo fix in the up delay error message (outputting "down delay", instead
of "up delay").

Signed-off-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings