linux-stable.git/drivers, branch v3.18.95 Linux kernel stable tree ACPI: sbshc: remove raw pointer from printk() message 2018-02-16T19:14:46+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-01-19T09:06:03+00:00 0a0e3ffb0a1445a756cc91cd9f03b1ac3abd2e32 commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by: Wang Qize <wang_qize@venustech.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream.

There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.

Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pktcdvd: Fix pkt_setup_dev() error path 2018-02-16T19:14:46+00:00 Bart Van Assche bart.vanassche@wdc.com 2018-01-02T19:39:47+00:00 16f14ebe6131856ba4aec9c1dcb00fdb991d0c38 commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream. Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream.

Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
modified add_disk() and disk_release() but did not update any of the
error paths that trigger a put_disk() call after disk->queue has been
assigned. That introduced the following behavior in the pktcdvd driver
if pkt_new_dev() fails:

Kernel BUG at 00000000e98fd882 [verbose debug info unavailable]

Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL,
fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev()
error path.

Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EDAC, octeon: Fix an uninitialized variable warning 2018-02-16T19:14:46+00:00 James Hogan jhogan@kernel.org 2017-11-13T16:12:06+00:00 e715f11f9ea7cc76f5970786d4f35d325335089f commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream. Fix an uninitialized variable warning in the Octeon EDAC driver, as seen in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU Tools 2016.05-03: drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’: drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \ be used uninitialized in this function [-Wmaybe-uninitialized] if (int_reg.s.sec_err || int_reg.s.ded_err) { ^ Iinitialise the whole int_reg variable to zero before the conditional assignments in the error injection case. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support") Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream.

Fix an uninitialized variable warning in the Octeon EDAC driver, as seen
in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU
Tools 2016.05-03:

  drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’:
  drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \
    be used uninitialized in this function [-Wmaybe-uninitialized]
    if (int_reg.s.sec_err || int_reg.s.ded_err) {
                        ^
Iinitialise the whole int_reg variable to zero before the conditional
assignments in the error injection case.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support")
Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: cxusb, dib0700: ignore XC2028_I2C_FLUSH 2018-02-16T19:14:45+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2018-01-24T11:01:57+00:00 f874d19f2cbef34a4858cfd946d5072e57a6121e commit 9893b905e743ded332575ca04486bd586c0772f7 upstream. The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it. That prevents filling the dmesg with lots of messages like: dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9893b905e743ded332575ca04486bd586c0772f7 upstream.

The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

	dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto: caam - fix endless loop when DECO acquire fails 2018-02-16T19:14:45+00:00 Horia Geantă horia.geanta@nxp.com 2018-02-05T09:15:52+00:00 fd2ebfa2de94cc688f5031ca61608272b3c62f14 commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 upstream. In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails with -ENODEV, caam_probe() enters an endless loop: run_descriptor_deco0 ret -ENODEV -> instantiate_rng -ENODEV, overwritten by -EAGAIN ret -EAGAIN -> caam_probe -EAGAIN results in endless loop It turns out the error path in instantiate_rng() is incorrect, the checks are done in the wrong order. Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles") Reported-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by: Auer Lukas <lukas.auer@aisec.fraunhofer.de> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 upstream.

In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails
with -ENODEV, caam_probe() enters an endless loop:

run_descriptor_deco0
	ret -ENODEV
	-> instantiate_rng
		-ENODEV, overwritten by -EAGAIN
		ret -EAGAIN
		-> caam_probe
			-EAGAIN results in endless loop

It turns out the error path in instantiate_rng() is incorrect,
the checks are done in the wrong order.

Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
Reported-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Auer Lukas <lukas.auer@aisec.fraunhofer.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: nand: Fix nand_do_read_oob() return value 2018-02-16T19:14:44+00:00 Miquel Raynal miquel.raynal@free-electrons.com 2018-01-12T09:13:36+00:00 0dcc0912d39465102ffc5cd44ce6ac8d2d5c8933 commit 87e89ce8d0d14f573c068c61bec2117751fb5103 upstream. Starting from commit 041e4575f034 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it. However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer. Commit e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged. Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 87e89ce8d0d14f573c068c61bec2117751fb5103 upstream.

Starting from commit 041e4575f034 ("mtd: nand: handle ECC errors in
OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a
negative error, and the MTD layer expected it.

However, the trend for the NAND layer is now to return an error or a
positive number of bitflips. Deciding which status to return to the user
belongs to the MTD layer.

Commit e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
brought this logic to the mtd_read_oob() function while the return value
coming from nand_do_read_oob() (called by the ->_read_oob() hook) was
left unchanged.

Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner 2018-02-16T19:14:44+00:00 Malcolm Priestley tvboxspy@gmail.com 2017-09-26T21:10:21+00:00 6cd23a0e51dd2580bfdbb005ad1edeeaf9192d00 commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream.

When the tuner was split from m88rs2000 the attach function is in wrong
place.

Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.

Prevents driver starting up without any tuner connected.

Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: dvb-usb-v2: lmedm04: Improve logic checking of warm start 2018-02-16T19:14:44+00:00 Malcolm Priestley tvboxspy@gmail.com 2017-09-26T21:10:20+00:00 84882420c73f959fdbad90e538a6d1644c6703dc commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream.

Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.

Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.

Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: vhci: stop printing kernel pointer addresses in messages 2018-02-16T19:14:44+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-19T00:24:22+00:00 c6afe2ab06b0992b4826c015e1523bc114c41d10 commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: stub: stop printing kernel pointer addresses in messages 2018-02-16T19:14:43+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-19T00:23:37+00:00 f52839830f99b2937854ec70e6bd41587fb73971 commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>