linux-stable.git/drivers, branch v3.18.84

ipmi: fix unsigned long underflow

2017-11-24T07:30:05+00:00

commit 392a17b10ec4320d3c0e96e2a23ebaad1123b989 upstream.

When I set the timeout to a specific value such as 500ms, the timeout
event will not happen in time due to the overflow in function
check_msg_timeout:
...
	ent->timeout -= timeout_period;
	if (ent->timeout > 0)
		return;
...

The type of timeout_period is long, but ent->timeout is unsigned long.
This patch makes the type consistent.

Reported-by: Weilong Chen 
Signed-off-by: Corey Minyard 
Tested-by: Weilong Chen 
Signed-off-by: Greg Kroah-Hartman

fealnx: Fix building error on MIPS

2017-11-24T07:30:04+00:00

[ Upstream commit cc54c1d32e6a4bb3f116721abf900513173e4d02 ]

This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the LONG macro, which conflicts with the LONG enum
in drivers/net/ethernet/fealnx.c.

Signed-off-by: Huacai Chen 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

USB: serial: garmin_gps: fix memory leak on probe errors

2017-11-21T08:01:08+00:00

commit 74d471b598444b7f2d964930f7234779c80960a0 upstream.

Make sure to free the port private data before returning after a failed
probe attempt.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: garmin_gps: fix I/O after failed probe and remove

2017-11-21T08:01:08+00:00

commit 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 upstream.

Make sure to stop any submitted interrupt and bulk-out URBs before
returning after failed probe and when the port is being unbound to avoid
later NULL-pointer dereferences in the completion callbacks.

Also fix up the related and broken I/O cancellation on failed open and
on close. (Note that port->write_urb was never submitted.)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: garmin_gps: fix memory leak on failed URB submit

2017-11-21T08:01:08+00:00

commit c4ac4496e835b78a45dfbf74f6173932217e4116 upstream.

Make sure to free the URB transfer buffer in case submission fails (e.g.
due to a disconnect).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update

2017-11-21T08:01:07+00:00

commit 771394a54148f18926ca86414e51c69eda27d0cd upstream.

Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update
mode.

Signed-off-by: Douglas Fischer 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: Add delay-init quirk for Corsair K70 LUX keyboards

2017-11-21T08:01:07+00:00

commit a0fea6027f19c62727315aba1a7fae75a9caa842 upstream.

Without this patch, K70 LUX keyboards don't work, saying
usb 3-3: unable to read config index 0 descriptor/all
usb 3-3: can't read configurations, error -110
usb usb3-port3: unable to enumerate USB device

Signed-off-by: Bernhard Rosenkraenzer 
Signed-off-by: Greg Kroah-Hartman

USB: usbfs: compute urb->actual_length for isochronous

2017-11-21T08:01:07+00:00

commit 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 upstream.

The USB kerneldoc says that the actual_length field "is read in
non-iso completion functions", but the usbfs driver uses it for all
URB types in processcompl().  Since not all of the host controller
drivers set actual_length for isochronous URBs, programs using usbfs
with some host controllers don't work properly.  For example, Minas
reports that a USB camera controlled by libusb doesn't work properly
with a dwc2 controller.

It doesn't seem worthwhile to change the HCDs and the documentation,
since the in-kernel USB class drivers evidently don't rely on
actual_length for isochronous transfers.  The easiest solution is for
usbfs to calculate the actual_length value for itself, by adding up
the lengths of the individual packets in an isochronous transfer.

Signed-off-by: Alan Stern 
CC: Minas Harutyunyan 
Reported-and-tested-by: wlf 
Signed-off-by: Greg Kroah-Hartman

ixgbe: handle close/suspend race with netif_device_detach/present

2017-11-21T08:01:06+00:00

[ Upstream commit f7f37e7ff2b9b7eff7fbd035569cab35896869a3 ]

When an interface is part of a namespace it is possible that
ixgbe_close() may be called while __ixgbe_shutdown() is running
which ends up in a double free WARN and/or a BUG in free_msi_irqs().

To handle this situation we extend the rtnl_lock() to protect the
call to netif_device_detach() and ixgbe_clear_interrupt_scheme()
in __ixgbe_shutdown() and check for netif_device_present()
to avoid clearing the interrupts second time in ixgbe_close();

Also extend the rtnl lock in ixgbe_resume() to netif_device_attach().

Signed-off-by: Emil Tantilov 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ixgbe: fix AER error handling

2017-11-21T08:01:06+00:00

[ Upstream commit 126db13fa0e6d05c9f94e0125f61e773bd5ab079 ]

Make sure that we free the IRQs in ixgbe_io_error_detected() when
responding to an PCIe AER error and also restore them when the
interface recovers from it.

Previously it was possible to trigger BUG_ON() check in free_msix_irqs()
in the case where we call ixgbe_remove() after a failed recovery from
AER error because the interrupts were not freed.

Signed-off-by: Emil Tantilov 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman