linux-stable.git/drivers, branch v3.16.7

rtc-cmos: fix wakeup from S5 without CONFIG_PM_SLEEP

2014-10-30T16:40:16+00:00

commit a882b14fe84951e236cd074e93575adc8a4be32e upstream.

Commit b5ada4600dfd ("drivers/rtc/rtc-cmos.c: fix compilation warning
when !CONFIG_PM_SLEEP") broke wakeup from S5 by making cmos_poweroff a
nop unless CONFIG_PM_SLEEP was defined.

Fix this by restricting the #ifdef to cmos_resume and restoring the old
dependency on CONFIG_PM for cmos_suspend and cmos_poweroff.

Signed-off-by: Daniel Glöckner 
Cc: Mika Westerberg 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix issue with USB suspend in btusb driver

2014-10-30T16:40:15+00:00

commit 85560c4a828ec9c8573840c9b66487b6ae584768 upstream.

Suspend could fail for some platforms because
btusb_suspend==> btusb_stop_traffic ==> usb_kill_anchored_urbs.

When btusb_bulk_complete returns before system suspend and resubmits
an URB, the system cannot enter suspend state.

Signed-off-by: Champion Chen 
Signed-off-by: Larry Finger 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix HCI H5 corrupted ack value

2014-10-30T16:40:15+00:00

commit 4807b51895dce8aa650ebebc51fa4a795ed6b8b8 upstream.

In this expression: seq = (seq - 1) % 8
seq (u8) is implicitly converted to an int in the arithmetic operation.
So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1.
The new seq value is 0xff which is an invalid ACK value, we expect 0x07.
It leads to frequent dropped ACK and retransmission.
Fix this by using '&' binary operator instead of '%'.

Signed-off-by: Loic Poulain 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Revert "ath9k_hw: reduce ANI firstep range for older chips"

2014-10-30T16:40:15+00:00

commit 171cdab8c78bb169d9693d587e1d02d2dd5a0274 upstream.

This reverts commit 09efc56345be4146ab9fc87a55c837ed5d6ea1ab

I've received reports that this change is decreasing throughput in some
rare conditions on an AR9280 based device

Signed-off-by: Felix Fietkau 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

rt2800: correct BBP1_TX_POWER_CTRL mask

2014-10-30T16:40:15+00:00

commit 01f7feeaf4528bec83798316b3c811701bac5d3e upstream.

Two bits control TX power on BBP_R1 register. Correct the mask,
otherwise we clear additional bit on BBP_R1 register, what can have
unknown, possible negative effect.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

PCI: Generate uppercase hex for modalias interface class

2014-10-30T16:40:15+00:00

commit 89ec3dcf17fd3fa009ecf8faaba36828dd6bc416 upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D.  Most interface types defined in the spec do not use
alpha characters, so they won't be affected.  For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

[bhelgaas: changelog]
Signed-off-by: Ricardo Ribalda Delgado 
Signed-off-by: Bjorn Helgaas 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size

2014-10-30T16:40:15+00:00

commit 9fe373f9997b48fcd6222b95baf4a20c134b587a upstream.

The Crocodile chip occasionally comes up with 4k and 8k BAR sizes.  Due to
an erratum, setting the SR-IOV page size causes the physical function BARs
to expand to the system page size.  Since ppc64 uses 64k pages, when Linux
tries to assign the smaller resource sizes to the now 64k BARs the address
will be truncated and the BARs will overlap.

Force Linux to allocate the resource as a full page, which avoids the
overlap.

[bhelgaas: print expanded resource, too]
Signed-off-by: Douglas Lehr 
Signed-off-by: Anton Blanchard 
Signed-off-by: Bjorn Helgaas 
Acked-by: Milton Miller 
Signed-off-by: Greg Kroah-Hartman

PCI: Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources()

2014-10-30T16:40:15+00:00

commit d61b0e87d2dfba3706dbbd6c7c6fd41c3d845685 upstream.

In 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to
64-bit resources"), we added IORESOURCE_MEM_64 to the mask in
pci_assign_unassigned_root_bus_resources(), but not to the mask in
pci_assign_unassigned_bridge_resources().

Add IORESOURCE_MEM_64 to the pci_assign_unassigned_bridge_resources() type
mask.

Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: mvebu: Fix uninitialized variable in mvebu_get_tgt_attr()

2014-10-30T16:40:15+00:00

commit 56fab6e189441d714a2bfc8a64f3df9c0749dff7 upstream.

Geert Uytterhoeven reported a warning when building pci-mvebu:

  drivers/pci/host/pci-mvebu.c: In function 'mvebu_get_tgt_attr':
  drivers/pci/host/pci-mvebu.c:887:39: warning: 'rtype' may be used uninitialized in this function [-Wmaybe-uninitialized]
     if (slot == PCI_SLOT(devfn) && type == rtype) {
					 ^

And indeed, the code of mvebu_get_tgt_attr() may lead to the usage of rtype
when being uninitialized, even though it would only happen if we had
entries other than I/O space and 32 bits memory space.

This commit fixes that by simply skipping the current DT range being
considered, if it doesn't match the resource type we're looking for.

Reported-by: Geert Uytterhoeven 
Signed-off-by: Thomas Petazzoni 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

spi: dw-mid: terminate ongoing transfers at exit

2014-10-30T16:40:15+00:00

commit 8e45ef682cb31fda62ed4eeede5d9745a0a1b1e2 upstream.

Do full clean up at exit, means terminate all ongoing DMA transfers.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman