linux-stable.git/drivers, branch linux-3.12.y

Input: i8042 - add Clevo P650RS to the i8042 reset list

2017-05-09T06:19:55+00:00

commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 upstream.

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.

Reported-by: Paweł Bylica 
Tested-by: Ed Bordin 
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

md:raid1: fix a dead loop when read from a WriteMostly disk

2017-05-09T06:19:50+00:00

commit 816b0acf3deb6d6be5d0519b286fdd4bafade905 upstream.

If first_bad == this_sector when we get the WriteMostly disk
in read_balance(), valid disk will be returned with zero
max_sectors. It'll lead to a dead loop in make_request(), and
OOM will happen because of endless allocation of struct bio.

Since we can't get data from this disk in this case, so
continue for another disk.

Signed-off-by: Wei Fang 
Signed-off-by: Shaohua Li 
Cc: Julia Lawall 
Signed-off-by: Jiri Slaby

net: phy: handle state correctly in phy_stop_machine

2017-05-09T06:19:46+00:00

[ Upstream commit 49d52e8108a21749dc2114b924c907db43358984 ]

If the PHY is halted on stop, then do not set the state to PHY_UP.  This
ensures the phy will be restarted later in phy_start when the machine is
started again.

Fixes: 00db8189d984 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.")
Signed-off-by: Nathan Sullivan 
Signed-off-by: Brad Mouring 
Acked-by: Xander Huff 
Acked-by: Kyle Roeschley 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

hostap: avoid uninitialized variable use in hfa384x_get_rid

2017-05-09T06:19:44+00:00

commit 48dc5fb3ba53b20418de8514700f63d88c5de3a3 upstream.

The driver reads a value from hfa384x_from_bap(), which may fail,
and then assigns the value to a local variable. gcc detects that
in in the failure case, the 'rlen' variable now contains
uninitialized data:

In file included from ../drivers/net/wireless/intersil/hostap/hostap_pci.c:220:0:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function 'hfa384x_get_rid':
drivers/net/wireless/intersil/hostap/hostap_hw.c:842:5: warning: 'rec' may be used uninitialized in this function [-Wmaybe-uninitialized]
  if (le16_to_cpu(rec.len) == 0) {

This restructures the function as suggested by Russell King, to
make it more readable and get more reliable error handling, by
handling each failure mode using a goto.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Kalle Valo 
Signed-off-by: Jiri Slaby

tty: nozomi: avoid a harmless gcc warning

2017-05-09T06:19:43+00:00

commit a4f642a8a3c2838ad09fe8313d45db46600e1478 upstream.

The nozomi wireless data driver has its own helper function to
transfer data from a FIFO, doing an extra byte swap on big-endian
architectures, presumably to bring the data back into byte-serial
order after readw() or readl() perform their implicit byteswap.

This helper function is used in the receive_data() function to
first read the length into a 32-bit variable, which causes
a compile-time warning:

drivers/tty/nozomi.c: In function 'receive_data':
drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized]

The problem is that gcc is unsure whether the data was actually
read or not. We know that it is at this point, so we can replace
it with a single readl() to shut up that warning.

I am leaving the byteswap in there, to preserve the existing
behavior, even though this seems fishy: Reading the length of
the data into a cpu-endian variable should normally not use
a second byteswap on big-endian systems, unless the hardware
is aware of the CPU endianess.

There appears to be a lot more confusion about endianess in this
driver, so it probably has not worked on big-endian systems in
a long time, if ever, and I have no way to test it. It's well
possible that this driver has not been used by anyone in a while,
the last patch that looks like it was tested on the hardware is
from 2008.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Jiri Slaby

ubi/upd: Always flush after prepared for an update

2017-05-09T06:19:38+00:00

commit 9cd9a21ce070be8a918ffd3381468315a7a76ba6 upstream.

In commit 6afaf8a484cb ("UBI: flush wl before clearing update marker") I
managed to trigger and fix a similar bug. Now here is another version of
which I assumed it wouldn't matter back then but it turns out UBI has a
check for it and will error out like this:

|ubi0 warning: validate_vid_hdr: inconsistent used_ebs
|ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592

All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a
powercut in the middle of the operation.
ubi_start_update() sets the update-marker and puts all EBs on the erase
list. After that userland can proceed to write new data while the old EB
aren't erased completely. A powercut at this point is usually not that
much of a tragedy. UBI won't give read access to the static volume
because it has the update marker. It will most likely set the corrupted
flag because it misses some EBs.
So we are all good. Unless the size of the image that has been written
differs from the old image in the magnitude of at least one EB. In that
case UBI will find two different values for `used_ebs' and refuse to
attach the image with the error message mentioned above.

So in order not to get in the situation, the patch will ensure that we
wait until everything is removed before it tries to write any data.
The alternative would be to detect such a case and remove all EBs at the
attached time after we processed the volume-table and see the
update-marker set. The patch looks bigger and I doubt it is worth it
since usually the write() will wait from time to time for a new EB since
usually there not that many spare EB that can be used.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Richard Weinberger 
Signed-off-by: Jiri Slaby

ACPI / power: Avoid maybe-uninitialized warning

2017-05-09T06:19:37+00:00

commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream.

gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state()
is enterered at least once, so it assumes that cur_state might not get
initialized:

drivers/acpi/power.c: In function 'acpi_power_get_inferred_state':
drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This sets the variable to zero at the start of the loop, to ensure that
there is well-defined behavior even for an empty list. This gets rid of
the warning.

The warning first showed up when the -Os flag got removed in a bug fix
patch in linux-4.11-rc5.

I would suggest merging this addon patch on top of that bug fix to avoid
introducing a new warning in the stable kernels.

Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing)
Signed-off-by: Arnd Bergmann 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Jiri Slaby

Input: elantech - add Fujitsu Lifebook E547 to force crc_enabled

2017-05-09T06:19:36+00:00

commit 704de489e0e3640a2ee2d0daf173e9f7375582ba upstream.

Temporary got a Lifebook E547 into my hands and noticed the touchpad
only works after running:

	echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled

Add it to the list of machines that need this workaround.

Signed-off-by: Thorsten Leemhuis 
Reviewed-by: Ulrik De Bie 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Drivers: hv: get rid of timeout in vmbus_open()

2017-05-09T06:19:36+00:00

commit 396e287fa2ff46e83ae016cdcb300c3faa3b02f6 upstream.

vmbus_teardown_gpadl() can result in infinite wait when it is called on 5
second timeout in vmbus_open(). The issue is caused by the fact that gpadl
teardown operation won't ever succeed for an opened channel and the timeout
isn't always enough. As a guest, we can always trust the host to respond to
our request (and there is nothing we can do if it doesn't).

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Sumit Semwal 
Signed-off-by: Jiri Slaby

Drivers: hv: don't leak memory in vmbus_establish_gpadl()

2017-05-09T06:19:35+00:00

commit 7cc80c98070ccc7940fc28811c92cca0a681015d upstream.

In some cases create_gpadl_header() allocates submessages but we never
free them.

[sumits] Note for stable:
Upstream commit 4d63763296ab7865a98bc29cc7d77145815ef89f:
(Drivers: hv: get rid of redundant messagecount in create_gpadl_header())
changes the list usage to initialize list header in all cases; that patch
isn't added to stable, so the current patch is modified a little bit from
the upstream commit to check if the list is valid or not.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Sumit Semwal 
Signed-off-by: Jiri Slaby