linux-stable.git/drivers, branch linux-2.6.33.y Linux kernel stable tree drivers/net/rionet.c: fix ethernet address macros for LE platforms 2011-11-07T21:47:42+00:00 Alexandre Bounine alexandre.bounine@idt.com 2011-11-02T20:39:15+00:00 8f22b38e8446a3bba7a3f54825d5d22c92e2ca5a commit e0c87bd95e8dad455c23bc56513af8dcb1737e55 upstream. Modify Ethernet addess macros to be compatible with BE/LE platforms Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit e0c87bd95e8dad455c23bc56513af8dcb1737e55 upstream.

Modify Ethernet addess macros to be compatible with BE/LE platforms

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
thinkpad-acpi: module autoloading for newer Lenovo ThinkPads. 2011-11-07T21:47:36+00:00 Manoj Iyer manoj.iyer@canonical.com 2011-10-20T18:50:25+00:00 425f213726d314c0820a63cac1389d19a76df37f commit 9fbdaeb4f4dd14a0caa9fc35c496d5440c251a3a upstream. The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead of IBM0068. Added new HID so that thinkpad_acpi module will auto load on these newer Lenovo ThinkPads. Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@vger.kernel.org Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 9fbdaeb4f4dd14a0caa9fc35c496d5440c251a3a upstream.

The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead
of IBM0068. Added new HID so that thinkpad_acpi module will
auto load on these newer Lenovo ThinkPads.

Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@vger.kernel.org
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
watchdog: mtx1-wdt: fix build failure 2011-11-07T21:47:35+00:00 Florian Fainelli florian@openwrt.org 2011-10-17T17:47:44+00:00 f6a5ce266ac9a86619e3fea054b4b6f49734815d Commit 72b6e8a847 (watchdog: mtx1-wdt: request gpio before using it) was backported from upstream. The patch is using a gpiolib call which is only available in kernel 2.6.34+. Fix build by using the "old" gpiolib API instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Commit 72b6e8a847 (watchdog: mtx1-wdt: request gpio before using it) was
backported from upstream. The patch is using a gpiolib call which is only
available in kernel 2.6.34+. Fix build by using the "old" gpiolib API
instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Revert "usb: musb: restore INDEX register in resume path" 2011-11-07T21:47:35+00:00 Greg Kroah-Hartman gregkh@suse.de 2011-11-02T21:04:11+00:00 948ed3ced0bab3d89267b7d02b6a4a2b25ce0133 This reverts commit 5aa8a93b5d44724f1f63357b300eca208fb069d0. Turns out this breaks the build, and as such, really isn't needed for the 2.6.33-stable branch at all. Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This reverts commit 5aa8a93b5d44724f1f63357b300eca208fb069d0.

Turns out this breaks the build, and as such, really isn't needed for
the 2.6.33-stable branch at all.

Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
tuner_xc2028: Allow selection of the frequency adjustment code for XC3028 2011-11-07T21:47:32+00:00 Mauro Carvalho Chehab mchehab@redhat.com 2011-07-28T19:38:54+00:00 76faaf6dde04f5acd5be8161af3c07249cce6a70 commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream. This device is not using the proper demod IF. Instead of using the IF macro, it is specifying a IF frequency. This doesn't work, as xc3028 needs to load an specific SCODE for the tuner. In this case, there's no IF table for 5 MHz. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream.

This device is not using the proper demod IF. Instead of using the
IF macro, it is specifying a IF frequency. This doesn't work, as xc3028
needs to load an specific SCODE for the tuner. In this case, there's
no IF table for 5 MHz.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uvcvideo: Set alternate setting 0 on resume if the bus has been reset 2011-11-07T21:47:31+00:00 Ming Lei tom.leiming@gmail.com 2011-07-16T03:51:00+00:00 81e249443b97a8fec7e95030b8393853f1c0cf5b commit d59a7b1dbce8b972ec2dc9fcaaae0bfa23687423 upstream. If the bus has been reset on resume, set the alternate setting to 0. This should be the default value, but some devices crash or otherwise misbehave if they don't receive a SET_INTERFACE request before any other video control request. Microdia's 0c45:6437 camera has been found to require this change or it will stop sending video data after resume. uvc_video.c] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit d59a7b1dbce8b972ec2dc9fcaaae0bfa23687423 upstream.

If the bus has been reset on resume, set the alternate setting to 0.
This should be the default value, but some devices crash or otherwise
misbehave if they don't receive a SET_INTERFACE request before any other
video control request.

Microdia's 0c45:6437 camera has been found to require this change or it
will stop sending video data after resume.

uvc_video.c]

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
carminefb: Fix module parameters permissions 2011-11-07T21:47:31+00:00 Jean Delvare jdelvare@suse.de 2011-07-08T09:04:38+00:00 6f076ec2242ea04dd8a7e063d5d4194b2214cdfc commit c84c14224bbca6ec60d5851fcc87be0e34df2f44 upstream. The third parameter of module_param is supposed to be an octal value. The missing leading "0" causes the following: $ ls -l /sys/module/carminefb/parameters/ total 0 -rw-rwxr-- 1 root root 4096 Jul 8 08:55 fb_displays -rw-rwxr-- 1 root root 4096 Jul 8 08:55 fb_mode -rw-rwxr-- 1 root root 4096 Jul 8 08:55 fb_mode_str After fixing the perm parameter, we get the expected: $ ls -l /sys/module/carminefb/parameters/ total 0 -r--r--r-- 1 root root 4096 Jul 8 08:56 fb_displays -r--r--r-- 1 root root 4096 Jul 8 08:56 fb_mode -r--r--r-- 1 root root 4096 Jul 8 08:56 fb_mode_str Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit c84c14224bbca6ec60d5851fcc87be0e34df2f44 upstream.

The third parameter of module_param is supposed to be an octal value.
The missing leading "0" causes the following:

$ ls -l /sys/module/carminefb/parameters/
total 0
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_displays
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode_str

After fixing the perm parameter, we get the expected:

$ ls -l /sys/module/carminefb/parameters/
total 0
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_displays
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode_str

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ccwgroup: move attributes to attribute group 2011-11-07T21:47:30+00:00 Sebastian Ott sebott@linux.vnet.ibm.com 2011-10-30T14:16:52+00:00 f5b218b84cc375589e8e7c83296497c66d1592c4 commit dbdf1afcaaabe83dea15a3cb9b9013e73ae3b1ad upstream. Put sysfs attributes of ccwgroup devices in an attribute group to ensure that these attributes are actually present when userspace is notified via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit dbdf1afcaaabe83dea15a3cb9b9013e73ae3b1ad upstream.

Put sysfs attributes of ccwgroup devices in an attribute group to
ensure that these attributes are actually present when userspace
is notified via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
QE/FHCI: fixed the CONTROL bug 2011-11-07T21:47:21+00:00 Jerry Huang r66093@freescale.com 2011-10-18T05:09:48+00:00 fc94e7993593e0594524c8bef4616d38b1be9206 commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream. For USB CONTROL transaction, when the data length is zero, the IN package is needed to finish this transaction in status stage. Signed-off-by: Jerry Huang <r66093@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream.

For USB CONTROL transaction, when the data length is zero,
the IN package is needed to finish this transaction in status stage.

Signed-off-by: Jerry Huang <r66093@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board 2011-11-07T21:47:20+00:00 Peter Stuge peter@stuge.se 2011-10-10T01:34:54+00:00 77447121fe52022de89494cc59631d9a5b58cdd8 commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream. Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: Peter Stuge <peter@stuge.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream.

Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard,
and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger
Interface Board. The ICDI board can also be used stand-alone, for
other boards and chips than the kit it came with. The ICDI has both
old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm
pitch connector.

Tested with EK-LM3S9B90, where the BD-ICDI board is included.

Signed-off-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>