Pull xen fixes from Juergen Gross:

 - two cleanup patches

 - a fix of a memory leak in the Xen pvfront driver

 - a fix of a locking issue in the Xen hypervisor console driver

* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvcalls: free active map buffer on pvcalls_front_free_map
  hvc/xen: lock console list traversal
  x86/xen: Remove the unused function p2m_index()
  xen: make remove callback of xen driver void returned

Data buffer for active map is allocated in alloc_active_ring and freed
in free_active_ring function, which is used only for the error
cleanup. pvcalls_front_release is calling pvcalls_front_free_map which
ends foreign access for this buffer, but doesn't free allocated pages.
Call free_active_ring to clean all allocated resources.

Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/6a762ee32dd655cbb09a4aa0e2307e8919761311.1671531297.git.oleksii_moisieiev@epam.com
Signed-off-by: Juergen Gross <jgross@suse.com>

Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.

This change is for xen bus based drivers.

Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull drm updates from Dave Airlie:
 "The biggest highlight is that the accel subsystem framework is merged.
  Hopefully for 6.3 we will be able to line up a driver to use it.

  In drivers land, i915 enables DG2 support by default now, and nouveau
  has a big stability refactoring and initial ampere support, AMD
  includes new hw IP support and should build on ARM again. There is
  also an ofdrm driver to take over offb on platforms it's used.

  Stuff outside my tree, the dma-buf patches hit a few places, the vc4
  firmware changes also do, and i915 has some interactions with MEI for
  discrete GPUs. I think all of those should have been acked/reviewed by
  relevant parties.

  New driver:
   - ofdrm - replacement for offb

  fbdev:
   - add support for nomodeset

  fourcc:
   - add Vivante tiled modifier

  core:
   - atomic-helpers: CRTC primary plane test fixes, fb access hooks
   - connector: TV API consistency, cmdline parser improvements
   - send connector hotplug on cleanup
   - sort makefile objects

  tests:
   - sort kunit tests
   - improve DP-MST tests
   - add kunit helpers to create a device

  sched:
   - module param for scheduling policy
   - refcounting fix

  buddy:
   - add back random seed log

  ttm:
   - convert ttm_resource to size_t
   - optimize pool allocations

  edid:
   - HFVSDB parsing support fixes
   - logging/debug improvements
   - DSC quirks

  dma-buf:
   - Add unlocked vmap and attachment mapping
   - move drivers to common locking convention
   - locking improvements

  firmware:
   - new API for rPI firmware and vc4

  xilinx:
   - zynqmp: displayport bridge support
   - dpsub fix

  bridge:
   - adv7533: Remove dynamic lane switching
   - it6505: Runtime PM support, sync improvements
   - ps8640: Handle AUX defer messages
   - tc358775: Drop soft-reset over I2C

  panel:
   - panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
   - Jadard JD9365DA-H3
   - NewVision NV3051D

  amdgpu:
   - DCN support on ARM
   - DCN 2.1 secure display
   - Sienna Cichlid mode2 reset fixes
   - new GC 11.x firmware versions
   - drop AMD specific DSC workarounds in favour of drm code
   - clang warning fixes
   - scheduler rework
   - SR-IOV fixes
   - GPUVM locking fixes
   - fix memory leak in CS IOCTL error path
   - flexible array updates
   - enable new GC/PSP/SMU/NBIO IP
   - GFX preemption support for gfx9

  amdkfd:
   - cache size fixes
   - userptr fixes
   - enable cooperative launch on gfx 10.3
   - enable GC 11.0.4 KFD support

  radeon:
   - replace kmap with kmap_local_page
   - ACPI ref count fix
   - HDA audio notifier support

  i915:
   - DG2 enabled by default
   - MTL enablement work
   - hotplug refactoring
   - VBT improvements
   - Display and watermark refactoring
   - ADL-P workaround
   - temp disable runtime_pm for discrete-
   - fix for A380 as a secondary GPU
   - Wa_18017747507 for DG2
   - CS timestamp support fixes for gen5 and earlier
   - never purge busy TTM objects
   - use i915_sg_dma_sizes for all backends
   - demote GuC kernel contexts to normal priority
   - gvt: refactor for new MDEV interface
   - enable DC power states on eDP ports
   - fix gen 2/3 workarounds

  nouveau:
   - fix page fault handling
   - Ampere acceleration support
   - driver stability improvements
   - nva3 backlight support

  msm:
   - MSM_INFO_GET_FLAGS support
   - DPU: XR30 and P010 image formats
   - Qualcomm SM6115 support
   - DSI PHY support for QCM2290
   - HDMI: refactored dev init path
   - remove exclusive-fence hack
   - fix speed-bin detection
   - enable clamp to idle on 7c3
   - improved hangcheck detection

  vmwgfx:
   - fb and cursor refactoring
   - convert to generic hashtable
   - cursor improvements

  etnaviv:
   - hw workarounds
   - softpin MMU fixes

  ast:
   - atomic gamma LUT support
   - convert to SHMEM

  lcdif:
   - support YUV planes
   - Increase DMA burst size
   - FIFO threshold tuning

  meson:
   - fix return type of cvbs mode_valid

  mgag200:
   - fix PLL setup on some revisions

  sun4i:
   - A100 and D1 support

  udl:
   - modesetting improvements
   - hot unplug support

  vc4:
   - support PAL-M
   - fix regression preventing 4K @ 60Hz
   - fix NULL ptr deref

  v3d:
   - switch to drm managed resources

  renesas:
   - RZ/G2L DSI support
   - DU Kconfig cleanup

  mediatek:
   - fixup dpi and hdmi
   - MT8188 dpi support
   - MT8195 AFBC support

  tegra:
   - NVDEC hardware on Tegra234 SoC

  hdlcd:
   - switch to drm managed resources

  ingenic:
   - fix registration error path

  hisilicon:
   - convert to drm_mode_init

  maildp:
   - use managed resources

  mtk:
   - use drm_mode_init

  rockchip:
   - use drm_mode_copy"

* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
  drm/amdgpu: fix mmhub register base coding error
  drm/amdgpu: add tmz support for GC IP v11.0.4
  drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
  drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
  drm/amdgpu: enable GFX IP v11.0.4 CG support
  drm/amdgpu: Make amdgpu_ring_mux functions as static
  drm/amdgpu: generally allow over-commit during BO allocation
  drm/amd/display: fix array index out of bound error in DCN32 DML
  drm/amd/display: 3.2.215
  drm/amd/display: set optimized required for comp buf changes
  drm/amd/display: Add debug option to skip PSR CRTC disable
  drm/amd/display: correct DML calc error of UrgentLatency
  drm/amd/display: correct static_screen_event_mask
  drm/amd/display: Ensure commit_streams returns the DC return code
  drm/amd/display: read invalid ddc pin status cause engine busy
  drm/amd/display: Bypass DET swath fill check for max clocks
  drm/amd/display: Disable uclk pstate for subvp pipes
  drm/amd/display: Fix DCN2.1 default DSC clocks
  drm/amd/display: Enable dp_hdmi21_pcon support
  drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
  ...

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls

Pull ACPI and PNP updates from Rafael Wysocki:
 "These include new code (for instance, support for the FFH address
  space type and support for new firmware data structures in ACPICA),
  some new quirks (mostly related to backlight handling and I2C
  enumeration), a number of fixes and a fair amount of cleanups all
  over.

  Specifics:

   - Update the ACPICA code in the kernel to the 20221020 upstream
     version and fix a couple of issues in it:
      - Make acpi_ex_load_op() match upstream implementation (Rafael
        Wysocki)
      - Add support for loong_arch-specific APICs in MADT (Huacai Chen)
      - Add support for fixed PCIe wake event (Huacai Chen)
      - Add EBDA pointer sanity checks (Vit Kabele)
      - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
      - Add CCEL table support to both compiler/disassembler (Kuppuswamy
        Sathyanarayanan)
      - Add a couple of new UUIDs to the known UUID list (Bob Moore)
      - Add support for FFH Opregion special context data (Sudeep
        Holla)
      - Improve warning message for "invalid ACPI name" (Bob Moore)
      - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
        table (Alison Schofield)
      - Prepare IORT support for revision E.e (Robin Murphy)
      - Finish support for the CDAT table (Bob Moore)
      - Fix error code path in acpi_ds_call_control_method() (Rafael
        Wysocki)
      - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
        Zetao)
      - Update the version of the ACPICA code in the kernel (Bob Moore)

   - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
     enumeration code (Giulio Benetti)

   - Change the return type of the ACPI driver remove callback to void
     and update its users accordingly (Dawei Li)

   - Add general support for FFH address space type and implement the
     low- level part of it for ARM64 (Sudeep Holla)

   - Fix stale comments in the ACPI tables parsing code and make it
     print more messages related to MADT (Hanjun Guo, Huacai Chen)

   - Replace invocations of generic library functions with more kernel-
     specific counterparts in the ACPI sysfs interface (Christophe
     JAILLET, Xu Panda)

   - Print full name paths of ACPI power resource objects during
     enumeration (Kane Chen)

   - Eliminate a compiler warning regarding a missing function prototype
     in the ACPI power management code (Sudeep Holla)

   - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
     Zhong, Colin Ian King, Sudeep Holla)

   - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
     driver (Mia Kanashi)

   - Add some mew ACPI backlight handling quirks and update some
     existing ones (Hans de Goede)

   - Make the ACPI backlight driver prefer the native backlight control
     over vendor backlight control when possible (Hans de Goede)

   - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)

   - Use xchg_release() instead of cmpxchg() for updating new GHES cache
     slots (Ard Biesheuvel)

   - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
     Lu)

   - Add new I2C device enumeration quirks for Medion Lifetab S10346 and
     Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)

   - Make the ACPI battery driver notify user space about adding new
     battery hooks and removing the existing ones (Armin Wolf)

   - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
     for freeing acpi_object structures to help diagnostics (Wang
     ShaoBo)

   - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
     code (ye xingchen)

   - Fix the _FIF package extraction failure handling in the ACPI fan
     driver (Hanjun Guo)

   - Fix the PCC mailbox handling error code path (Huisong Li)

   - Avoid using PCC Opregions if there is no platform interrupt
     allocated for this purpose (Huisong Li)

   - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
     CPPC library (ye xingchen)

   - Fix some kernel-doc issues in the ACPI GSI processing code
     (Xiongfeng Wang)

   - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)

   - Do not disable PNP devices on suspend when they cannot be
     re-enabled on resume (Hans de Goede)

   - Clean up the ACPI thermal driver a bit (Rafael Wysocki)"

* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
  ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
  ACPI: APEI: EINJ: Refactor available_error_type_show()
  ACPI: APEI: EINJ: Fix formatting errors
  ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
  ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
  ACPI: processor: perflib: Rearrange unregistration routine
  ACPI: processor: perflib: Drop redundant parentheses
  ACPI: processor: perflib: Adjust white space
  ACPI: processor: idle: Drop unnecessary statements and parens
  ACPI: thermal: Adjust critical.flags.valid check
  ACPI: fan: Convert to use sysfs_emit_at() API
  ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
  ACPI: battery: Call power_supply_changed() when adding hooks
  ACPI: use sysfs_emit() instead of scnprintf()
  ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
  ACPI: APEI: Remove a useless include
  PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
  ACPI: processor: Silence missing prototype warnings
  ACPI: processor_idle: Silence missing prototype warnings
  ACPI: PM: Silence missing prototype warning
  ...

Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:

 - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
   enumeration code (Giulio Benetti).

 - Change the return type of the ACPI driver remove callback to void and
   update its users accordingly (Dawei Li).

 - Add general support for FFH address space type and implement the low-
   level part of it for ARM64 (Sudeep Holla).

 - Fix stale comments in the ACPI tables parsing code and make it print
   more messages related to MADT (Hanjun Guo, Huacai Chen).

 - Replace invocations of generic library functions with more kernel-
   specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
   Xu Panda).

* acpi-scan:
  ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)

* acpi-bus:
  ACPI: FFH: Silence missing prototype warnings
  ACPI: make remove callback of ACPI driver void
  ACPI: bus: Fix the _OSC capability check for FFH OpRegion
  arm64: Add architecture specific ACPI FFH Opregion callbacks
  ACPI: Implement a generic FFH Opregion handler

* acpi-tables:
  ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
  ACPI: tables: Print CORE_PIC information when MADT is parsed

* acpi-sysfs:
  ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
  ACPI: sysfs: Use kstrtobool() instead of strtobool()

As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.

Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource

Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch.

Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221126050745.778967-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>

Use the same "xen-grant-dma" device concept for the PCI devices
behind device-tree based PCI Host controller, but with one modification.
Unlike for platform devices, we cannot use generic IOMMU bindings
(iommus property), as we need to support more flexible configuration.
The problem is that PCI devices under the single PCI Host controller
may have the backends running in different Xen domains and thus have
different endpoints ID (backend domains ID).

Add ability to deal with generic PCI-IOMMU bindings (iommu-map/
iommu-map-mask properties) which allows us to describe relationship
between PCI devices and backend domains ID properly.

To avoid having to look up for the PCI Host bridge twice and reduce
the amount of checks pass an extra struct device_node *np to
xen_dt_grant_init_backend_domid().

So with current patch the code expects iommus property for the platform
devices and iommu-map/iommu-map-mask properties for PCI devices.

The example of generated by the toolstack iommu-map property
for two PCI devices 0000:00:01.0 and 0000:00:02.0 whose
backends are running in different Xen domains with IDs 1 and 2
respectively:
iommu-map = <0x08 0xfde9 0x01 0x08 0x10 0xfde9 0x02 0x08>;

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221025162004.8501-3-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>

This is needed to avoid having to parse the same device-tree
several times for a given device.

For this to work we need to install the xen_virtio_restricted_mem_acc
callback in Arm's xen_guest_init() which is same callback as x86's
PV and HVM modes already use and remove the manual assignment in
xen_setup_dma_ops(). Also we need to split the code to initialize
backend_domid into a separate function.

Prior to current patch we parsed the device-tree three times:
1. xen_setup_dma_ops()->...->xen_is_dt_grant_dma_device()
2. xen_setup_dma_ops()->...->xen_dt_grant_init_backend_domid()
3. xen_virtio_mem_acc()->...->xen_is_dt_grant_dma_device()

With current patch we parse the device-tree only once in
xen_virtio_restricted_mem_acc()->...->xen_dt_grant_init_backend_domid()

Other benefits are:
- Not diverge from x86 when setting up Xen grant DMA ops
- Drop several global functions

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221025162004.8501-2-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>