linux-stable.git/drivers/xen, branch v4.0.7

xen/events: don't bind non-percpu VIRQs with percpu chip

2015-06-06T15:20:52+00:00

commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a upstream.

A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different
VCPU than it is bound to.  This can result in a race between
handle_percpu_irq() and removing the action in __free_irq() because
handle_percpu_irq() does not take desc->lock.  The interrupt handler
sees a NULL action and oopses.

Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER).

  # cat /proc/interrupts | grep virq
   40:      87246          0  xen-percpu-virq      timer0
   44:          0          0  xen-percpu-virq      debug0
   47:          0      20995  xen-percpu-virq      timer1
   51:          0          0  xen-percpu-virq      debug1
   69:          0          0   xen-dyn-virq      xen-pcpu
   74:          0          0   xen-dyn-virq      mce
   75:         29          0   xen-dyn-virq      hvc_console

Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

xen-pciback: Add name prefix to global 'permissive' variable

2015-05-17T16:55:07+00:00

commit 8014bcc86ef112eab9ee1db312dba4e6b608cf89 upstream.

The variable for the 'permissive' module parameter used to be static
but was recently changed to be extern.  This puts it in the kernel
global namespace if the driver is built-in, so its name should begin
with a prefix identifying the driver.

Signed-off-by: Ben Hutchings 
Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register")
Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq()

2015-05-17T16:55:07+00:00

commit 16e6bd5970c88a2ac018b84a5f1dd5c2ff1fdf2c upstream.

.. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to
'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu().

Signed-off-by: Boris Ostrovsky 
Tested-by: Annie Li 
Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

xen/xenbus: Update xenbus event channel on resume

2015-05-17T16:55:07+00:00

commit 16f1cf3ba7303228372d3756677bf7d10e79cf9f upstream.

After a resume the hypervisor/tools may change xenbus event
channel number. We should re-query it.

Signed-off-by: Boris Ostrovsky 
Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

xen/events: Clear cpu_evtchn_mask before resuming

2015-05-17T16:55:07+00:00

commit 5cec98834989a014a9560b1841649eaca95cf00e upstream.

When a guest is resumed, the hypervisor may change event channel
assignments. If this happens and the guest uses 2-level events it
is possible for the interrupt to be claimed by wrong VCPU since
cpu_evtchn_mask bits may be stale. This can happen even though
evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that
is passed in is not necessarily the original one (from pre-migration
times) but instead is freshly allocated during resume and so any
information about which CPU the channel was bound to is lost.

Thus we should clear the mask during resume.

We also need to make sure that bits for xenstore and console channels
are set when these two subsystems are resumed. While rebind_evtchn_irq()
(which is invoked for both of them on a resume) calls irq_set_affinity(),
the latter will in fact postpone setting affinity until handling the
interrupt. But because cpu_evtchn_mask will have bits for these two
cleared we won't be able to take the interrupt.

With that in mind, we need to bind those two channels explicitly in
rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a
pass through generic irq affinity code later, in case something needs
to be updated there as well.

(Also replace cpumask_of(0) with cpumask_of(info->cpu) in
rebind_evtchn_irq(): it should be set to zero in preceding
xen_irq_info_evtchn_setup().)

Signed-off-by: Boris Ostrovsky 
Reported-by: Annie Li 
Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2015-04-02T20:53:53+00:00

Pull xen regression fixes from David Vrabel:
 "Fix two regressions in the balloon driver's use of memory hotplug when
  used in a PV guest"

* tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: before adding hotplugged memory, set frames to invalid
  x86/xen: prepare p2m list for memory hotplug

xen/balloon: before adding hotplugged memory, set frames to invalid

2015-03-23T15:15:53+00:00

Commit 25b884a83d487fd62c3de7ac1ab5549979188482 ("x86/xen: set
regions above the end of RAM as 1:1") introduced a regression.

To be able to add memory pages which were added via memory hotplug to
a pv domain, the pages must be "invalid" instead of "identity" in the
p2m list before they can be added.

Suggested-by: David Vrabel 
Signed-off-by: Juergen Gross 
Cc:  # 3.16+
Reviewed-by: Daniel Kiper 
Signed-off-by: David Vrabel

x86/xen: prepare p2m list for memory hotplug

2015-03-23T15:14:47+00:00

Commit 054954eb051f35e74b75a566a96fe756015352c8 ("xen: switch to linear
virtual mapped sparse p2m list") introduced a regression regarding to
memory hotplug for a pv-domain: as the virtual space for the p2m list
is allocated for the to be expected memory size of the domain only,
hotplugged memory above that size will not be usable by the domain.

Correct this by using a configurable size for the p2m list in case of
memory hotplug enabled (default supported memory size is 512 GB for
64 bit domains and 4 GB for 32 bit domains).

Signed-off-by: Juergen Gross 
Cc:  # 3.19+
Reviewed-by: Daniel Kiper 
Signed-off-by: David Vrabel

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-03-21T18:24:38+00:00

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are current target-pending fixes for v4.0-rc5 code that have made
  their way into the queue over the last weeks.

  The fixes this round include:

   - Fix long-standing iser-target logout bug related to early
     conn_logout_comp completion, resulting in iscsi_conn use-after-tree
     OOpsen.  (Sagi + nab)

   - Fix long-standing tcm_fc bug in ft_invl_hw_context() failure
     handing for DDP hw offload.  (DanC)

   - Fix incorrect use of unprotected __transport_register_session() in
     tcm_qla2xxx + other single local se_node_acl fabrics.  (Bart)

   - Fix reference leak in target_submit_cmd() -> target_get_sess_cmd()
     for ack_kref=1 failure path.  (Bart)

   - Fix pSCSI backend ->get_device_type() statistics OOPs with
     un-configured device.  (Olaf + nab)

   - Fix virtual LUN=0 target_configure_device failure OOPs at modprobe
     time.  (Claudio + nab)

   - Fix FUA write false positive failure regression in v4.0-rc1 code.
     (Christophe Vu-Brugier + HCH)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0
  target: Fix virtual LUN=0 target_configure_device failure OOPs
  target/pscsi: Fix NULL pointer dereference in get_device_type
  tcm_fc: missing curly braces in ft_invl_hw_context()
  target: Fix reference leak in target_get_sess_cmd() error path
  loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session
  tcm_qla2xxx: Fix incorrect use of __transport_register_session
  iscsi-target: Avoid early conn_logout_comp for iser connections
  Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"
  target: Disallow changing of WRITE cache/FUA attrs after export

loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session

2015-03-20T06:15:14+00:00

This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback
fabric code to invoke transport_register_session() instead of the
unprotected flavour, to ensure se_tpg->session_lock is taken when
adding new session list nodes to se_tpg->tpg_sess_list.

Note that since these four fabric drivers already hold their own
internal TPG mutexes when accessing se_tpg->tpg_sess_list, and
consist of a single se_session created through configfs attribute
access, no list corruption can currently occur.

So for correctness sake, go ahead and use the se_tpg->session_lock
protected version for these four fabric drivers.

Signed-off-by: Bart Van Assche 
Signed-off-by: Nicholas Bellinger