linux-stable.git/drivers/watchdog, branch v6.11

Merge tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog

2024-07-25T17:18:35+00:00

Pull watchdog updates from Wim Van Sebroeck:

 - make watchdog_class const

 - rework of the rzg2l_wdt driver

 - other small fixes and improvements

* tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space
  watchdog: rzn1: Convert comma to semicolon
  watchdog: lenovo_se10_wdt: Convert comma to semicolon
  dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  watchdog: rzg2l_wdt: Add suspend/resume support
  watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  watchdog: rzg2l_wdt: Remove comparison with zero
  watchdog: rzg2l_wdt: Remove reset de-assert from probe
  watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  watchdog: rzg2l_wdt: Make the driver depend on PM
  watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  watchdog: imx7ulp_wdt: keep already running watchdog enabled
  watchdog: starfive: Add missing clk_disable_unprepare()
  watchdog: Make watchdog_class const

watchdog: rzn1: Convert comma to semicolon

2024-07-18T18:35:40+00:00

Replace a comma between expression statements by a semicolon.

Fixes: d65112f58464 ("watchdog: Add Renesas RZ/N1 Watchdog driver")
Signed-off-by: Chen Ni 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240716031137.400502-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: lenovo_se10_wdt: Convert comma to semicolon

2024-07-18T18:35:40+00:00

Replace a comma between expression statements by a semicolon.

Fixes: 1f6602c8ed1e ("watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform")
Signed-off-by: Chen Ni 
Reviewed-by: Guenter Roeck 
Reviewed-by: Mark Pearson 
Link: https://lore.kernel.org/r/20240716030725.400400-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2024-07-18T00:42:20+00:00

Pull MFD updates from Lee Jones:
 "New Drivers:
   - ROHM BD96801 Power Management IC
   - Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
   - Marvell 88PM886 Power Management IC

  New Device Support:
   - Keyboard Backlight to ChromeOS Embedded Controller
   - LEDs to ChromeOS Embedded Controller
   - Charge Control to ChromeOS Embedded Controller
   - HW Monitoring Service to ChromeOS Embedded Controller
   - AUXADCs to MediaTek MT635{7,8,9} Power Management ICs

  New Functionality:
   - Allow Syscon consumers to supply their own Regmaps on registration

  Fix-ups:
   - Constify/staticise applicable data structures
   - Remove superfluous/duplicated/unused sections
   - Device Tree binding adaptions/conversions/creation
   - Trivial; spelling, whitespace, coding-style adaptions
   - Utilise centrally provided helpers and macros to aid
     simplicity/duplication
   - Drop i2c_device_id::driver_data where the value is unused
   - Replace ACPI/DT firmware helpers with agnostic variants
   - Move over to GPIOD (descriptor-based) APIs
   - Annotate a bunch of __counted_by() cases
   - Straighten out some includes

  Bug Fixes:
   - Ensure potentially asserted recent lines are deasserted during
     initialisation
   - Avoid ".ko is added to multiple modules" warnings
   - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
   - Fix Wvoid-pointer-to-enum-cast warnings"

* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
  mfd: timberdale: Attach device properties to TSC2007 board info
  mfd: tmio: Move header to platform_data
  mfd: tmio: Sanitize comments
  mfd: tmio: Update include files
  mmc: tmio/sdhi: Fix includes
  mfd: tmio: Remove obsolete io accessors
  mfd: tmio: Remove obsolete platform_data
  watchdog: bd96801_wdt: Add missing include for FIELD_*()
  dt-bindings: mfd: syscon: Add APM poweroff mailbox
  dt-bindings: mfd: syscon: Split and enforce documenting MFD children
  dt-bindings: mfd: rk817: Merge support for RK809
  dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
  dt-bindings: mfd: syscon: Add TI's opp table compatible
  mfd: omap-usb-tll: Use struct_size to allocate tll
  dt-bindings: mfd: Explain lack of child dependency in simple-mfd
  dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
  mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
  mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
  mfd: lm3533: Move to new GPIO descriptor-based APIs
  mfd: tps65912: Use devm helper functions to simplify probe
  ...

watchdog: rzg2l_wdt: Add suspend/resume support

2024-07-10T18:01:34+00:00

The RZ/G3S supports deep sleep states where power to most of the IP blocks
is cut off. To ensure proper working of the watchdog when resuming from
such states, the suspend function is stopping the watchdog and the resume
function is starting it. There is no need to configure the watchdog
in case the watchdog was stopped prior to starting suspend.

Signed-off-by: Claudiu Beznea 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-9-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset

2024-07-10T18:01:34+00:00

The reset driver has been adapted in commit da235d2fac21
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.

Signed-off-by: Claudiu Beznea 
Reviewed-by: Philipp Zabel 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: rzg2l_wdt: Remove comparison with zero

2024-07-10T18:01:33+00:00

devm_add_action_or_reset() could return -ENOMEM or zero. Thus, remove
comparison with zero of the returning value to make code simpler.

Signed-off-by: Claudiu Beznea 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: rzg2l_wdt: Remove reset de-assert from probe

2024-07-10T18:01:33+00:00

There is no need to de-assert the reset signal on probe as the watchdog
is not used prior executing start. Also, the clocks are not enabled in
probe (pm_runtime_enable() doesn't do that), thus this is another indicator
that the watchdog wasn't used previously like this. Instead, keep the
watchdog hardware in its previous state at probe (by default it is in
reset state), enable it when it is started and move it to reset state
when it is stopped. This saves some extra power when the watchdog is
unused.

Signed-off-by: Claudiu Beznea 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: rzg2l_wdt: Check return status of pm_runtime_put()

2024-07-10T18:01:32+00:00

pm_runtime_put() may return an error code. Check its return status.

Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_stop() to its caller.

Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()

2024-07-10T18:01:32+00:00

pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.

Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_start() to its caller.

Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20240531065723.1085423-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck