linux-stable.git/drivers/watchdog, branch v5.4.2

watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading

2019-11-05T15:58:12+00:00

The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell for
watchdog is added.

Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block")
Signed-off-by: Matti Vaittinen 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format

2019-11-05T15:58:12+00:00

SCU firmware calculates pretimeout based on current time stamp
instead of watchdog timeout stamp, need to convert the pretimeout
to SCU firmware's timeout value.

Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support")
Signed-off-by: Anson Huang 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: meson: Fix the wrong value of left time

2019-11-05T15:58:12+00:00

The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.

[0]: http://linux-meson.com

Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen 
Acked-by: Neil Armstrong 
Reviewed-by: Kevin Hilman 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: pm8916_wdt: fix pretimeout registration flow

2019-11-05T15:58:11+00:00

When an IRQ is present in the dts, the probe function shall fail if
the interrupt can not be registered.

The probe function shall also be retried if getting the irq is being
deferred.

Signed-off-by: Jorge Ramirez-Ortiz 
Reviewed-by: Loic Poulain 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: cpwd: fix build regression

2019-11-05T15:58:11+00:00

The compat_ptr_ioctl() infrastructure did not make it into
linux-5.4, so cpwd now fails to build.

Fix it by using an open-coded version.

Fixes: 68f28b01fb9e ("watchdog: cpwd: use generic compat_ptr_ioctl")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

Merge tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog

2019-09-27T18:17:38+00:00

Pull watchdog updates from Wim Van Sebroeck:

 - addition of AST2600, i.MX7ULP and F81803 watchdog support

 - removal of the w90x900 and ks8695 drivers

 - ziirave_wdt improvements

 - small fixes and improvements

* tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits)
  watchdog: f71808e_wdt: Add F81803 support
  watchdog: qcom: remove unnecessary variable from private storage
  watchdog: qcom: support pre-timeout when the bark irq is available
  watchdog: imx_sc: this patch just fixes whitespaces
  watchdog: apseed: Add access_cs0 option for alt-boot
  watchdog: aspeed: add support for dual boot
  watchdog: orion_wdt: use timer1 as a pretimeout
  watchdog: Add i.MX7ULP watchdog support
  dt-bindings: watchdog: Add i.MX7ULP bindings
  dt-bindings: watchdog: sun4i: Add the watchdog clock
  dt-bindings: watchdog: sun4i: Add the watchdog interrupts
  dt-bindings: watchdog: Convert Allwinner watchdog to a schema
  dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
  watchdog: aspeed: Add support for AST2600
  dt-bindings: watchdog: Add ast2600 compatible
  watchdog: ziirave_wdt: Update checked I2C functionality mask
  watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
  watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
  watchdog: ziirave_wdt: Drop status polling code
  watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
  ...

Merge branch 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2019-09-24T23:48:02+00:00

Pull i2c updates from Wolfram Sang:

 - new driver for ICY, an Amiga Zorro card :)

 - axxia driver gained slave mode support, NXP driver gained ACPI

 - the slave EEPROM backend gained 16 bit address support

 - and lots of regular driver updates and reworks

* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  i2c: tegra: Move suspend handling to NOIRQ phase
  i2c: imx: ACPI support for NXP i2c controller
  i2c: uniphier(-f): remove all dev_dbg()
  i2c: uniphier(-f): use devm_platform_ioremap_resource()
  i2c: slave-eeprom: Add comment about address handling
  i2c: exynos5: Remove IRQF_ONESHOT
  i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  i2c-eeprom_slave: Add support for more eeprom models
  i2c: fsi: Add of_put_node() before break
  i2c: synquacer: Make synquacer_i2c_ops constant
  i2c: hix5hd2: Remove IRQF_ONESHOT
  i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
  watchdog: iTCO: Add support for Cannon Lake PCH iTCO
  i2c: iproc: Make bcm_iproc_i2c_quirks constant
  i2c: iproc: Add full name of devicetree node to adapter name
  i2c: piix4: Add ACPI support
  i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
  i2c: ocores: use request_any_context_irq() to register IRQ handler
  i2c: designware: Fix optional reset error handling
  ...

watchdog: f71808e_wdt: Add F81803 support

2019-09-17T06:59:14+00:00

This adds watchdog support for the Fintek F81803 Super I/O chip.

Testing was done on the Seneca XK-QUAD.

Signed-off-by: Jaret Cantu 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20190912175550.9340-1-jaret.cantu@timesys.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: qcom: remove unnecessary variable from private storage

2019-09-17T06:59:14+00:00

there is no need to continue keeping the clock in private storage.

Signed-off-by: Jorge Ramirez-Ortiz 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20190906205411.31666-3-jorge.ramirez-ortiz@linaro.org
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck

watchdog: qcom: support pre-timeout when the bark irq is available

2019-09-17T06:59:14+00:00

Use the bark interrupt as the pre-timeout notifier whenever this
interrupt is available.

By default, the pretimeout notification shall occur one second earlier
than the timeout.

Signed-off-by: Jorge Ramirez-Ortiz 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20190906205411.31666-2-jorge.ramirez-ortiz@linaro.org
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck