linux-stable.git/drivers/watchdog, branch v4.4.232

watchdog: da9062: No need to ping manually before setting timeout

2020-06-30T00:07:52+00:00

[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ]

There is actually no need to ping the watchdog before disabling it
during timeout change. Disabling the watchdog already takes care of
resetting the counter.

This fixes an issue during boot when the userspace watchdog handler takes
over and the watchdog is already running. Opening the watchdog in this case
leads to the first ping and directly after that without the required
heartbeat delay a second ping issued by the set_timeout call. Due to the
missing delay this resulted in a reset.

Signed-off-by: Stefan Riedmueller 
Reviewed-by: Guenter Roeck 
Reviewed-by: Adam Thomson 
Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin

watchdog: da9062: do not ping the hw during stop()

2020-03-11T06:51:16+00:00

[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ]

The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.

Signed-off-by: Marco Felsch 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin

watchdog: rn5t618_wdt: fix module aliases

2020-02-05T13:03:35+00:00

[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ]

Platform device aliases were missing so module autoloading
did not work.

Signed-off-by: Andreas Kemnade 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin

watchdog: bcm2835_wdt: Fix module autoload

2019-09-06T08:18:15+00:00

[ Upstream commit 215e06f0d18d5d653d6ea269e4dfc684854d48bf ]

The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe
to an MFD.") broke module autoloading on Raspberry Pi. So add a
module alias this fix this.

Signed-off-by: Stefan Wahren 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin

watchdog: f71808e_wdt: Fix magic close handling

2018-05-30T05:49:03+00:00

[ Upstream commit 7bd3e7b743956afbec30fb525bc3c5e22e3d475c ]

Watchdog close is "expected" when any byte is 'V' not just the last one.
Writing "V" to the device fails because the last byte is the end of string.

$ echo V > /dev/watchdog
f71808e_wdt: Unexpected close, not stopping watchdog!

Signed-off-by: Igor Pylypiv 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

watchdog: sp5100_tco: Fix watchdog disable bit

2018-05-30T05:48:53+00:00

[ Upstream commit f541c09ebfc61697b586b38c9ebaf4b70defb278 ]

According to all published information, the watchdog disable bit for SB800
compatible controllers is bit 1 of PM register 0x48, not bit 2. For the
most part that doesn't matter in practice, since the bit has to be cleared
to enable watchdog address decoding, which is the default setting, but it
still needs to be fixed.

Cc: Zoltán Böszörményi 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

watchdog: f71808e_wdt: Fix WD_EN register read

2018-04-24T07:32:08+00:00

commit 977f6f68331f94bb72ad84ee96b7b87ce737d89d upstream.

F71808FG_FLAG_WD_EN defines bit position, not a bitmask

Signed-off-by: Igor Pylypiv 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: fix unused variable warning

2018-03-18T10:17:50+00:00

commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream.

The new hpwdt_my_nmi() function is used conditionally, which produces
a harmless warning in some configurations:

drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function]

This moves it inside of the #ifdef that protects its caller, to silence
the warning.

Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: Check source of NMI

2018-03-18T10:17:50+00:00

commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream.

Do not claim the NMI (i.e. return NMI_DONE) if the source of
the NMI isn't the iLO watchdog or debug.

Signed-off-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman

watchdog: hpwdt: SMBIOS check

2018-03-18T10:17:50+00:00

commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream.

This corrects:
commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits")

The test on HPE SMBIOS extension type 219 record "Misc Features"
bits for UEFI support is incorrect.  The definition of the Misc Features
bits in the HPE SMBIOS OEM Extensions specification (and related
firmware) was changed to use a different pair of bits to
represent UEFI supported.  Howerver, a corresponding change
to Linux was missed.

Current code/platform work because the iCRU test is working.
But purpose of cce78da766 is to ensure correct functionality
on future systems where iCRU isn't supported.

Signed-off-by: Jerry Hoemann 
Reviewed-by: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Wim Van Sebroeck 
Signed-off-by: Greg Kroah-Hartman