linux-stable.git/drivers/w1, branch v5.5

w1: new driver. DS2430 chip

2019-11-14T05:06:33+00:00

add support for ds2430, 1 page, 256bit (32bytes) eeprom
(family 0x14).

Tests done:

32 bytes dump:

x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

34 bytes dump: 32 only displayed

x@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

pattern write:

x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 35 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

specific address 1-byte write

x@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \
		count=1 bs=1 seek=4
1+0 records in
1+0 records out
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 00 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

writing binary block

x@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
cat: write error: File too large

x@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  10 0b 5b ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff 40
00000020

Signed-off-by: Angelo Dureghello 
Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.com
Signed-off-by: Greg Kroah-Hartman

Merge 5.4-rc3 into char-misc-next

2019-10-14T05:36:49+00:00

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

w1: ds250x: Fix build error without CRC16

2019-10-10T13:35:41+00:00

If CRC16 is not set, building will fails:

drivers/w1/slaves/w1_ds250x.o: In function `w1_ds2505_read_page':
w1_ds250x.c:(.text+0x82f): undefined reference to `crc16'
w1_ds250x.c:(.text+0x90a): undefined reference to `crc16'
w1_ds250x.c:(.text+0x91a): undefined reference to `crc16'

Reported-by: Hulk Robot 
Fixes: 25ec8710d9c2 ("w1: add DS2501, DS2502, DS2505 EPROM device driver")
Signed-off-by: YueHaibing 
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20190920060318.35020-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

w1: sgi_w1: use devm_platform_ioremap_resource() to simplify code

2019-10-10T13:24:18+00:00

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20191009144435.12656-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

w1: add DS2501, DS2502, DS2505 EPROM device driver

2019-09-04T12:34:31+00:00

Add a 1-Wire slave driver to support DS250x EPROM deivces. This
slave driver attaches the devices to the NVMEM subsystem for
an easy in-kernel usage.

Signed-off-by: Thomas Bogendoerfer 
Link: https://lore.kernel.org/r/20190831082623.15627-3-tbogendoerfer@suse.de
Signed-off-by: Greg Kroah-Hartman

w1: add 1-wire master driver for IP block found in SGI ASICs

2019-09-04T12:34:31+00:00

Starting with SGI Origin machines nearly every new SGI ASIC contains
an 1-Wire master. They are used for attaching One-Wire prom devices,
which contain information about part numbers, revision numbers,
serial number etc. and MAC addresses for ethernet interfaces.
This patch adds a master driver to support this IP block.
It also adds an extra field dev_id to struct w1_bus_master, which
could be in used in slave drivers for creating unique device names.

Signed-off-by: Thomas Bogendoerfer 
Link: https://lore.kernel.org/r/20190831082623.15627-2-tbogendoerfer@suse.de
Signed-off-by: Greg Kroah-Hartman

w1: omap-hdq: use devm_platform_ioremap_resource() to simplify code

2019-08-05T15:56:46+00:00

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot 
Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20190802135010.24052-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: use devm_platform_ioremap_resource() to simplify code

2019-08-05T15:56:46+00:00

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot 
Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20190802134819.9088-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

docs: driver-api: add a series of orphaned documents

2019-07-15T14:03:02+00:00

There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.

Move them to their right place.

Reviewed-by: Cornelia Huck  # vfio-related parts
Acked-by: Logan Gunthorpe  # switchtec
Signed-off-by: Mauro Carvalho Chehab

docs: connector: convert to ReST and rename to connector.rst

2019-07-15T12:20:23+00:00

As it has some function definitions, move them to connector.h.

The remaining conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab