linux-stable.git/drivers/vme, branch v3.12.35

VME: Stop using memcpy_[to|from]io() due to unwanted behaviour

2014-11-19T22:44:31+00:00

commit a2a720e15f59be60c7ae1c58b5b4ac1003dd5078 upstream.

The ca91cx42 and tsi148 VME bridges use the width of reads and writes on the
PCI bus in part to control the width of the cycles on the VME bus. It is
important that we can control the width of cycles on the VME bus as some VME
hardware requires cycles of a specific width. The memcpy_toio() and
memcpy_fromio() functions do not provide sufficient control, so instead loop
using ioread functions.

Reported-by: Michael Kenney 
Signed-off-by: Martyn Welch 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

vme_tsi148: Fix typo in tsi148_slave_get()

2014-11-19T22:44:30+00:00

commit 098ced8fefe4a4e4240fa47b1ed9b00d65b6cd21 upstream.

This patch corrects a typo where "vme_base" was used instead of
"*vme_base". The typo resulted in an incorrect value being returned
to userspace (via vme_user).

It also removes the following compile warning on some platforms:

warning: cast from pointer to integer of different size

[asierra: commit title/log rewording]
Signed-off-by: Joe Schultz 
Signed-off-by: Aaron Sierra 
Signed-off-by: Greg Kroah-Hartman 

Signed-off-by: Jiri Slaby

vme_tsi148: Fix PCI address mapping assumption

2014-11-19T22:44:27+00:00

commit 226572b110ab6083cb8c1d6afb191166b4178179 upstream.

Previously, tsi148_master_set() assumed the address contained in its
PCI bus resource represented the actual PCI bus address. This is a fine
assumption on some platforms. However, on platforms that don't use a
1:1 (CPU:PCI) mapping this results in the tsi148 driver configuring an
invalid master window translation.

This patch updates the vme_tsi148 driver to first convert the address
contained in the PCI bus resource into a PCI bus address before using
it.

[asierra: account for pcibios_resource_to_bus() prototype change]
Signed-off-by: Joe Schultz 
Signed-off-by: Aaron Sierra 
Signed-off-by: Greg Kroah-Hartman 

Signed-off-by: Jiri Slaby

VME: Correct read/write alignment algorithm

2014-02-22T21:32:27+00:00

commit f0342e66b397947ed8c3eef8c37b5ca2d5b1bb50 upstream.

In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment.  This results in incorrect alignment,

Reported-by: Jim Strouth 
Tested-by: Jim Strouth 
Signed-off-by: Martyn Welch 
Signed-off-by: Greg Kroah-Hartman

vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq()

2013-08-28T04:49:26+00:00

free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.

Signed-off-by: Wei Yongjun 
Signed-off-by: Greg Kroah-Hartman

vme: vme_vmivme7805.c: add missing __iomem annotation

2013-08-20T00:07:01+00:00

Added missing __iomem annotation in order to fix the following
sparse warnings:

drivers/vme/boards/vme_vmivme7805.c:62:19: warning: incorrect type in assignment (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:62:19:    expected void *static [toplevel] vmic_base
drivers/vme/boards/vme_vmivme7805.c:62:19:    got void [noderef] *
drivers/vme/boards/vme_vmivme7805.c:70:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:70:9:    expected void volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:70:9:    got void *
drivers/vme/boards/vme_vmivme7805.c:73:16: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:73:16:    expected void const volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:73:16:    got void *
drivers/vme/boards/vme_vmivme7805.c:75:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:75:9:    expected void volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:75:9:    got void *
drivers/vme/boards/vme_vmivme7805.c:78:16: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:78:16:    expected void const volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:78:16:    got void *
drivers/vme/boards/vme_vmivme7805.c:85:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:85:9:    expected void volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:85:9:    got void *
drivers/vme/boards/vme_vmivme7805.c:99:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:99:17:    expected void volatile [noderef] *addr
drivers/vme/boards/vme_vmivme7805.c:99:17:    got void *static [toplevel] vmic_base

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

vme: vme_ca91cx42.c: add missing __iomem annotation

2013-08-20T00:07:01+00:00

Added missing __iomem annotation in order to fix the following
sparse warnings:

drivers/vme/bridges/vme_ca91cx42.c:859:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:859:39:    expected void *addr
drivers/vme/bridges/vme_ca91cx42.c:859:39:    got void [noderef] *
drivers/vme/bridges/vme_ca91cx42.c:878:30: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:878:30:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:878:30:    got void *addr
drivers/vme/bridges/vme_ca91cx42.c:885:47: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:885:47:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:885:47:    got void *
drivers/vme/bridges/vme_ca91cx42.c:889:48: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:889:48:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:889:48:    got void *
drivers/vme/bridges/vme_ca91cx42.c:896:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:896:17:    expected void const volatile [noderef] *
drivers/vme/bridges/vme_ca91cx42.c:896:17:    got void *
drivers/vme/bridges/vme_ca91cx42.c:901:40: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:901:40:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:901:40:    got void *
drivers/vme/bridges/vme_ca91cx42.c:905:39: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:905:39:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:905:39:    got void *
drivers/vme/bridges/vme_ca91cx42.c:919:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:919:39:    expected void *addr
drivers/vme/bridges/vme_ca91cx42.c:919:39:    got void [noderef] *
drivers/vme/bridges/vme_ca91cx42.c:932:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:932:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:932:17:    got void *addr
drivers/vme/bridges/vme_ca91cx42.c:939:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:939:25:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:939:25:    got void *
drivers/vme/bridges/vme_ca91cx42.c:943:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:943:25:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:943:25:    got void *
drivers/vme/bridges/vme_ca91cx42.c:950:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:950:17:    expected void volatile [noderef] *
drivers/vme/bridges/vme_ca91cx42.c:950:17:    got void *
drivers/vme/bridges/vme_ca91cx42.c:955:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:955:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:955:17:    got void *
drivers/vme/bridges/vme_ca91cx42.c:959:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:959:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_ca91cx42.c:959:17:    got void *

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

vme: vme_tsi148.c: add missing __iomem annotation

2013-08-20T00:07:01+00:00

Added missing __iomem annotation in order to fix the following
sparse warnings:

drivers/vme/bridges/vme_tsi148.c:1270:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1270:39:    expected void *addr
drivers/vme/bridges/vme_tsi148.c:1270:39:    got void [noderef] *
drivers/vme/bridges/vme_tsi148.c:1287:30: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1287:30:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1287:30:    got void *addr
drivers/vme/bridges/vme_tsi148.c:1294:47: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1294:47:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1294:47:    got void *
drivers/vme/bridges/vme_tsi148.c:1298:48: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1298:48:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1298:48:    got void *
drivers/vme/bridges/vme_tsi148.c:1305:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1305:17:    expected void const volatile [noderef] *
drivers/vme/bridges/vme_tsi148.c:1305:17:    got void *
drivers/vme/bridges/vme_tsi148.c:1310:40: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1310:40:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1310:40:    got void *
drivers/vme/bridges/vme_tsi148.c:1314:39: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1314:39:    expected void const volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1314:39:    got void *
drivers/vme/bridges/vme_tsi148.c:1351:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1351:39:    expected void *addr
drivers/vme/bridges/vme_tsi148.c:1351:39:    got void [noderef] *
drivers/vme/bridges/vme_tsi148.c:1369:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1369:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1369:17:    got void *addr
drivers/vme/bridges/vme_tsi148.c:1376:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1376:25:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1376:25:    got void *
drivers/vme/bridges/vme_tsi148.c:1380:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1380:25:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1380:25:    got void *
drivers/vme/bridges/vme_tsi148.c:1387:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1387:17:    expected void volatile [noderef] *
drivers/vme/bridges/vme_tsi148.c:1387:17:    got void *
drivers/vme/bridges/vme_tsi148.c:1392:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1392:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1392:17:    got void *
drivers/vme/bridges/vme_tsi148.c:1396:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1396:17:    expected void volatile [noderef] *addr
drivers/vme/bridges/vme_tsi148.c:1396:17:    got void *

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

vme: vme_tsi148.c: fix error return code in tsi148_probe()

2013-06-24T23:23:25+00:00

Fix to return a negative error code in the tsi148_crcsr_init() error
handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun 
Signed-off-by: Greg Kroah-Hartman

vme: tsi148: Window reserved for accessing CR/CSR does not need attributes set

2013-06-17T23:43:08+00:00

The tsi148 driver can be configured to reserve a window for internal
use (as part of the error checking routine). The intialisation of this
window currently configures a set of attributes that are never used
as these are only ever used by the VME core and this window is not
advertised to the core.

Remove configuration of these attributes.

Signed-off-by: Martyn Welch 
Signed-off-by: Greg Kroah-Hartman