[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]

Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.

This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]

Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.

This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.

Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7e415282b41bf0d15c6e0fe268f822d9b083f2f7 upstream.

GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:

    drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
    drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
      257 |                         if (vp_dev->msix_affinity_masks[i])
          |                             ^~~~~~

In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.

Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification.  So remove the verification
to make compiler happy (happy compiler, happy life).

[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103

Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ]

The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.

Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7a836a2aba09479c8e71fa43249eecc4af945f61 ]

If an error occurs after a successful pci_request_selected_regions() call,
it should be undone by a corresponding pci_release_selected_regions() call,
as already done in vp_modern_remove().

Fixes: fd502729fbbf ("virtio-pci: introduce modern device module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <237109725aad2c3c03d14549f777b1927c84b045.1648977064.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull virtio fixes from Michael Tsirkin:
 "Fixes and cleanups:

   - A couple of mlx5 fixes related to cvq

   - A couple of reverts dropping useless code (code that used it got
     reverted earlier)"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa: mlx5: synchronize driver status with CVQ
  vdpa: mlx5: prevent cvq work from hogging CPU
  Revert "virtio_config: introduce a new .enable_cbs method"
  Revert "virtio: use virtio_device_ready() in virtio_device_restore()"

Pull virtio updates from Michael Tsirkin:

 - vdpa generic device type support

 - more virtio hardening for broken devices (but on the same theme,
   revert some virtio hotplug hardening patches - they were misusing
   some interrupt flags and had to be reverted)

 - RSS support in virtio-net

 - max device MTU support in mlx5 vdpa

 - akcipher support in virtio-crypto

 - shared IRQ support in ifcvf vdpa

 - a minor performance improvement in vhost

 - enable virtio mem for ARM64

 - beginnings of advance dma support

 - cleanups, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
  vdpa/mlx5: Avoid processing works if workqueue was destroyed
  vhost: handle error while adding split ranges to iotlb
  vdpa: support exposing the count of vqs to userspace
  vdpa: change the type of nvqs to u32
  vdpa: support exposing the config size to userspace
  vdpa/mlx5: re-create forwarding rules after mac modified
  virtio: pci: check bar values read from virtio config space
  Revert "virtio_pci: harden MSI-X interrupts"
  Revert "virtio-pci: harden INTX interrupts"
  drivers/net/virtio_net: Added RSS hash report control.
  drivers/net/virtio_net: Added RSS hash report.
  drivers/net/virtio_net: Added basic RSS support.
  drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
  virtio: use virtio_device_ready() in virtio_device_restore()
  tools/virtio: compile with -pthread
  tools/virtio: fix after premapped buf support
  virtio_ring: remove flags check for unmap packed indirect desc
  virtio_ring: remove flags check for unmap split indirect desc
  virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
  net/mlx5: Add support for configuring max device MTU
  ...

This reverts commit 8d65bc9a5be3f23c5e2ab36b6b8ef40095165b18.

We reverted the problematic changes, no more need for work
arounds on restore.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio pci config structures may in future have non-standard bar
values in the bar field. We should anticipate this by skipping any
structures containing such a reserved value.

The bar value should never change: check for harmful modified values
we re-read it from the config space in vp_modern_map_capability().

Also clean up an existing check to consistently use PCI_STD_NUM_BARS.

Signed-off-by: Keir Fraser <keirf@google.com>
Link: https://lore.kernel.org/r/20220323140727.3499235-1-keirf@google.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This reverts commit 9e35276a5344f74d4a3600fc4100b3dd251d5c56. Issue
were reported for the drivers that are using affinity managed IRQ
where manually toggling IRQ status is not expected. And we forget to
enable the interrupts in the restore path as well.

In the future, we will rework on the interrupt hardening.

Fixes: 9e35276a5344 ("virtio_pci: harden MSI-X interrupts")
Reported-by: Marc Zyngier <maz@kernel.org>
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220323031524.6555-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>