linux-stable.git/drivers/video, branch v6.15 Linux kernel stable tree treewide: Switch/rename to timer_delete[_sync]() 2025-04-05T08:30:12+00:00 Thomas Gleixner tglx@linutronix.de 2025-04-05T08:17:26+00:00 8fa7292fee5c5240402371ea89ab285ec856c916 timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> 
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2025-04-01T16:29:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-04-01T16:29:18+00:00 eb0ece16027f8223d5dc9aaf90124f70577bd22a Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... 
Pull MM updates from Andrew Morton:

 - The series "Enable strict percpu address space checks" from Uros
   Bizjak uses x86 named address space qualifiers to provide
   compile-time checking of percpu area accesses.

   This has caused a small amount of fallout - two or three issues were
   reported. In all cases the calling code was found to be incorrect.

 - The series "Some cleanup for memcg" from Chen Ridong implements some
   relatively monir cleanups for the memcontrol code.

 - The series "mm: fixes for device-exclusive entries (hmm)" from David
   Hildenbrand fixes a boatload of issues which David found then using
   device-exclusive PTE entries when THP is enabled. More work is
   needed, but this makes thins better - our own HMM selftests now
   succeed.

 - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
   remove the z3fold and zbud implementations. They have been deprecated
   for half a year and nobody has complained.

 - The series "mm: further simplify VMA merge operation" from Lorenzo
   Stoakes implements numerous simplifications in this area. No runtime
   effects are anticipated.

 - The series "mm/madvise: remove redundant mmap_lock operations from
   process_madvise()" from SeongJae Park rationalizes the locking in the
   madvise() implementation. Performance gains of 20-25% were observed
   in one MADV_DONTNEED microbenchmark.

 - The series "Tiny cleanup and improvements about SWAP code" from
   Baoquan He contains a number of touchups to issues which Baoquan
   noticed when working on the swap code.

 - The series "mm: kmemleak: Usability improvements" from Catalin
   Marinas implements a couple of improvements to the kmemleak
   user-visible output.

 - The series "mm/damon/paddr: fix large folios access and schemes
   handling" from Usama Arif provides a couple of fixes for DAMON's
   handling of large folios.

 - The series "mm/damon/core: fix wrong and/or useless damos_walk()
   behaviors" from SeongJae Park fixes a few issues with the accuracy of
   kdamond's walking of DAMON regions.

 - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
   Stoakes changes the interaction between framebuffer deferred-io and
   core MM. No functional changes are anticipated - this is preparatory
   work for the future removal of page structure fields.

 - The series "mm/damon: add support for hugepage_size DAMOS filter"
   from Usama Arif adds a DAMOS filter which permits the filtering by
   huge page sizes.

 - The series "mm: permit guard regions for file-backed/shmem mappings"
   from Lorenzo Stoakes extends the guard region feature from its
   present "anon mappings only" state. The feature now covers shmem and
   file-backed mappings.

 - The series "mm: batched unmap lazyfree large folios during
   reclamation" from Barry Song cleans up and speeds up the unmapping
   for pte-mapped large folios.

 - The series "reimplement per-vma lock as a refcount" from Suren
   Baghdasaryan puts the vm_lock back into the vma. Our reasons for
   pulling it out were largely bogus and that change made the code more
   messy. This patchset provides small (0-10%) improvements on one
   microbenchmark.

 - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
   improves" from SeongJae Park does some maintenance work on the DAMON
   docs.

 - The series "hugetlb/CMA improvements for large systems" from Frank
   van der Linden addresses a pile of issues which have been observed
   when using CMA on large machines.

 - The series "mm/damon: introduce DAMOS filter type for unmapped pages"
   from SeongJae Park enables users of DMAON/DAMOS to filter my the
   page's mapped/unmapped status.

 - The series "zsmalloc/zram: there be preemption" from Sergey
   Senozhatsky teaches zram to run its compression and decompression
   operations preemptibly.

 - The series "selftests/mm: Some cleanups from trying to run them" from
   Brendan Jackman fixes a pile of unrelated issues which Brendan
   encountered while runnimg our selftests.

 - The series "fs/proc/task_mmu: add guard region bit to pagemap" from
   Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
   determine whether a particular page is a guard page.

 - The series "mm, swap: remove swap slot cache" from Kairui Song
   removes the swap slot cache from the allocation path - it simply
   wasn't being effective.

 - The series "mm: cleanups for device-exclusive entries (hmm)" from
   David Hildenbrand implements a number of unrelated cleanups in this
   code.

 - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
   implements a number of preparatoty cleanups to the GENERIC_PTDUMP
   Kconfig logic.

 - The series "mm/damon: auto-tune aggregation interval" from SeongJae
   Park implements a feedback-driven automatic tuning feature for
   DAMON's aggregation interval tuning.

 - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
   powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
   preparation for implementing lazy mmu mode for arm64 to optimize
   vmalloc.

 - The series "mm/page_alloc: Some clarifications for migratetype
   fallback" from Brendan Jackman reworks some commentary to make the
   code easier to follow.

 - The series "page_counter cleanup and size reduction" from Shakeel
   Butt cleans up the page_counter code and fixes a size increase which
   we accidentally added late last year.

 - The series "Add a command line option that enables control of how
   many threads should be used to allocate huge pages" from Thomas
   Prescher does that. It allows the careful operator to significantly
   reduce boot time by tuning the parallalization of huge page
   initialization.

 - The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
   from Tang Yizhou fixes the tracing output from the dirty page
   balancing code.

 - The series "mm/damon: make allow filters after reject filters useful
   and intuitive" from SeongJae Park improves the handling of allow and
   reject filters. Behaviour is made more consistent and the documention
   is updated accordingly.

 - The series "Switch zswap to object read/write APIs" from Yosry Ahmed
   updates zswap to the new object read/write APIs and thus permits the
   removal of some legacy code from zpool and zsmalloc.

 - The series "Some trivial cleanups for shmem" from Baolin Wang does as
   it claims.

 - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
   Alistair Popple regularizes the weird ZONE_DEVICE page refcount
   handling in DAX, permittig the removal of a number of special-case
   checks.

 - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
   preparatoty refactoring and cleanup of the mremap() code.

 - The series "mm: MM owner tracking for large folios (!hugetlb) +
   CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
   which we determine whether a large folio is known to be mapped
   exclusively into a single MM.

 - The series "mm/damon: add sysfs dirs for managing DAMOS filters based
   on handling layers" from SeongJae Park adds a couple of new sysfs
   directories to ease the management of DAMON/DAMOS filters.

 - The series "arch, mm: reduce code duplication in mem_init()" from
   Mike Rapoport consolidates many per-arch implementations of
   mem_init() into code generic code, where that is practical.

 - The series "mm/damon/sysfs: commit parameters online via
   damon_call()" from SeongJae Park continues the cleaning up of sysfs
   access to DAMON internal data.

 - The series "mm: page_ext: Introduce new iteration API" from Luiz
   Capitulino reworks the page_ext initialization to fix a boot-time
   crash which was observed with an unusual combination of compile and
   cmdline options.

 - The series "Buddy allocator like (or non-uniform) folio split" from
   Zi Yan reworks the code to split a folio into smaller folios. The
   main benefit is lessened memory consumption: fewer post-split folios
   are generated.

 - The series "Minimize xa_node allocation during xarry split" from Zi
   Yan reduces the number of xarray xa_nodes which are generated during
   an xarray split.

 - The series "drivers/base/memory: Two cleanups" from Gavin Shan
   performs some maintenance work on the drivers/base/memory code.

 - The series "Add tracepoints for lowmem reserves, watermarks and
   totalreserve_pages" from Martin Liu adds some more tracepoints to the
   page allocator code.

 - The series "mm/madvise: cleanup requests validations and
   classifications" from SeongJae Park cleans up some warts which
   SeongJae observed during his earlier madvise work.

 - The series "mm/hwpoison: Fix regressions in memory failure handling"
   from Shuai Xue addresses two quite serious regressions which Shuai
   has observed in the memory-failure implementation.

 - The series "mm: reliable huge page allocator" from Johannes Weiner
   makes huge page allocations cheaper and more reliable by reducing
   fragmentation.

 - The series "Minor memcg cleanups & prep for memdescs" from Matthew
   Wilcox is preparatory work for the future implementation of memdescs.

 - The series "track memory used by balloon drivers" from Nico Pache
   introduces a way to track memory used by our various balloon drivers.

 - The series "mm/damon: introduce DAMOS filter type for active pages"
   from Nhat Pham permits users to filter for active/inactive pages,
   separately for file and anon pages.

 - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
   separates the proactive reclaim statistics from the direct reclaim
   statistics.

 - The series "mm/vmscan: don't try to reclaim hwpoison folio" from
   Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
   code.

* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
  mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
  x86/mm: restore early initialization of high_memory for 32-bits
  mm/vmscan: don't try to reclaim hwpoison folio
  mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
  cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
  mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
  selftests/mm: speed up split_huge_page_test
  selftests/mm: uffd-unit-tests support for hugepages > 2M
  docs/mm/damon/design: document active DAMOS filter type
  mm/damon: implement a new DAMOS filter type for active pages
  fs/dax: don't disassociate zero page entries
  MM documentation: add "Unaccepted" meminfo entry
  selftests/mm: add commentary about 9pfs bugs
  fork: use __vmalloc_node() for stack allocation
  docs/mm: Physical Memory: Populate the "Zones" section
  xen: balloon: update the NR_BALLOON_PAGES state
  hv_balloon: update the NR_BALLOON_PAGES state
  balloon_compaction: update the NR_BALLOON_PAGES state
  meminfo: add a per node counter for balloon drivers
  mm: remove references to folio in __memcg_kmem_uncharge_page()
  ...
Merge tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight 2025-03-29T21:48:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-03-29T21:48:33+00:00 93d52288679e29aaa44a6f12d5a02e8a90e742c5 Pull backlight updates from Lee Jones: - Apple DWI Backlight: - Added devicetree bindings for backlight controllers on Apple's DWI interface. - Added a new driver (apple_dwi_bl) for these controllers found on some Apple mobile devices. - Added MAINTAINERS entries for the new driver. - led_bl: Fixed a locking issue by holding the led_access lock when calling led_sysfs_disable() during device removal to prevent potential warnings. - Removed unnecessary <linux/fb.h> includes from a bunch of drivers. - tdo24m: Removed redundant whitespace in Kconfig description. - pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD and s3c24xx platform support were removed. * tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits) backlight: pcf50633-backlight: Remove unused driver backlight: tdo24m: Eliminate redundant whitespace MAINTAINERS: Add entries for Apple DWI backlight controller backlight: apple_dwi_bl: Add Apple DWI backlight driver dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight backlight: led_bl: Hold led_access lock when calling led_sysfs_disable() backlight: wm831x_bl: Do not include <linux/fb.h> backlight: vgg2432a4: Do not include <linux/fb.h> backlight: tps65217_bl: Do not include <linux/fb.h> backlight: max8925_bl: Do not include <linux/fb.h> backlight: lv5207lp: Do not include <linux/fb.h> backlight: locomolcd: Do not include <linux/fb.h> backlight: hp680_bl: Do not include <linux/fb.h> backlight: ep93xx_bl: Do not include <linux/fb.h> backlight: da9052_bl: Do not include <linux/fb.h> backlight: da903x_bl: Do not include <linux/fb.h> backlight: bd6107_bl: Do not include <linux/fb.h> backlight: as3711_bl: Do not include <linux/fb.h> backlight: adp8870_bl: Do not include <linux/fb.h> backlight: adp8860_bl: Do not include <linux/fb.h> ... 
Pull backlight updates from Lee Jones:

 - Apple DWI Backlight:
    - Added devicetree bindings for backlight controllers on Apple's DWI
      interface.
    - Added a new driver (apple_dwi_bl) for these controllers found on
      some Apple mobile devices.
    - Added MAINTAINERS entries for the new driver.

 - led_bl: Fixed a locking issue by holding the led_access lock when
   calling led_sysfs_disable() during device removal to prevent
   potential warnings.

 - Removed unnecessary <linux/fb.h> includes from a bunch of drivers.

 - tdo24m: Removed redundant whitespace in Kconfig description.

 - pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD
   and s3c24xx platform support were removed.

* tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits)
  backlight: pcf50633-backlight: Remove unused driver
  backlight: tdo24m: Eliminate redundant whitespace
  MAINTAINERS: Add entries for Apple DWI backlight controller
  backlight: apple_dwi_bl: Add Apple DWI backlight driver
  dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight
  backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
  backlight: wm831x_bl: Do not include <linux/fb.h>
  backlight: vgg2432a4: Do not include <linux/fb.h>
  backlight: tps65217_bl: Do not include <linux/fb.h>
  backlight: max8925_bl: Do not include <linux/fb.h>
  backlight: lv5207lp: Do not include <linux/fb.h>
  backlight: locomolcd: Do not include <linux/fb.h>
  backlight: hp680_bl: Do not include <linux/fb.h>
  backlight: ep93xx_bl: Do not include <linux/fb.h>
  backlight: da9052_bl: Do not include <linux/fb.h>
  backlight: da903x_bl: Do not include <linux/fb.h>
  backlight: bd6107_bl: Do not include <linux/fb.h>
  backlight: as3711_bl: Do not include <linux/fb.h>
  backlight: adp8870_bl: Do not include <linux/fb.h>
  backlight: adp8860_bl: Do not include <linux/fb.h>
  ...
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel 2025-03-29T00:44:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-03-29T00:44:52+00:00 0c86b42439b6c11d758b3392a21117934fef00c1 Pull drm updates from Dave Airlie: "Outside of drm there are some rust patches from Danilo who maintains that area in here, and some pieces for drm header check tests. The major things in here are a new driver supporting the touchbar displays on M1/M2, the nova-core stub driver which is just the vehicle for adding rust abstractions and start developing a real driver inside of. xe adds support for SVM with a non-driver specific SVM core abstraction that will hopefully be useful for other drivers, along with support for shrinking for TTM devices. I'm sure xe and AMD support new devices, but the pipeline depth on these things is hard to know what they end up being in the marketplace! uapi: - add mediatek tiled fourcc - add support for notifying userspace on device wedged new driver: - appletbdrm: support for Apple Touchbar displays on m1/m2 - nova-core: skeleton rust driver to develop nova inside off firmware: - add some rust firmware pieces rust: - add 'LocalModule' type alias component: - add helper to query bound status fbdev: - fbtft: remove access to page->index media: - cec: tda998x: import driver from drm dma-buf: - add fast path for single fence merging tests: - fix lockdep warnings atomic: - allow full modeset on connector changes - clarify semantics of allow_modeset and drm_atomic_helper_check - async-flip: support on arbitary planes - writeback: fix UAF - Document atomic-state history format-helper: - support ARGB8888 to ARGB4444 conversions buddy: - fix multi-root cleanup ci: - update IGT dp: - support extended wake timeout - mst: fix RAD to string conversion - increase DPCD eDP control CAP size to 5 bytes - add DPCD eDP v1.5 definition - add helpers for LTTPR transparent mode panic: - encode QR code according to Fido 2.2 scheduler: - add parameter struct for init - improve job peek/pop operations - optimise drm_sched_job struct layout ttm: - refactor pool allocation - add helpers for TTM shrinker panel-orientation: - add a bunch of new quirks panel: - convert panels to multi-style functions - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e - visionox-r66451: use multi-style MIPI-DSI functions - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 bridge: - pass full atomic state to various callbacks - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - snd65dsi86: fix device IDs - nwl-dsi: set bridge type - ti-sn65si83: add error recovery and set bridge type - synopsys: add HDMI audio support xe: - support device-wedged event - add mmap support for PCI memory barrier - perf pmu integration and expose per-engien activity - add EU stall sampling support - GPU SVM and Xe SVM implementation - use TTM shrinker - add survivability mode to allow the driver to do firmware updates in critical failure states - PXP HWDRM support for MTL and LNL - expose package/vram temps over hwmon - enable DP tunneling - drop mmio_ext abstraction - Reject BO evcition if BO is bound to current VM - Xe suballocator improvements - re-use display vmas when possible - add GuC Buffer Cache abstraction - PCI ID update for Panther Lake and Battlemage - Enable SRIOV for Panther Lake - Refactor VRAM manager location i915: - enable extends wake timeout - support device-wedged event - Enable DP 128b/132b SST DSC - FBC dirty rectangle support for display version 30+ - convert i915/xe to drm client setup - Compute HDMI PLLS for rates not in fixed tables - Allow DSB usage when PSR is enabled on LNL+ - Enable panel replay without full modeset - Enable async flips with compressed buffers on ICL+ - support luminance based brightness via DPCD for eDP - enable VRR enable/disable without full modeset - allow GuC SLPC default strategies on MTL+ for performance - lots of display refactoring in move to struct intel_display amdgpu: - add device wedged event - support async page flips on overlay planes - enable broadcast RGB drm property - add info ioctl for virt mode - OEM i2c support for RGB lights - GC 11.5.2 + 11.5.3 support - SDMA 6.1.3 support - NBIO 7.9.1 + 7.11.2 support - MMHUB 1.8.1 + 3.3.2 support - DCN 3.6.0 support - Add dynamic workload profile switching for GC 10-12 - support larger VBIOS sizes - Mark gttsize parameters as deprecated - Initial JPEG queue resset support amdkfd: - add KFD per process flags for setting precision - sync pasid values between KGD and KFD - improve GTT/VRAM handling for APUs - fix user queue validation on GC7/8 - SDMA queue reset support raedeon: - rs400 hyperz fix i2c: - td998x: drop platform_data, split driver into media and bridge ast: - transmitter chip detection refactoring - vbios display mode refactoring - astdp: fix connection status and filter unsupported modes - cursor handling refactoring imagination: - check job dependencies with sched helper ivpu: - improve command queue handling - use workqueue for IRQ handling - add support HW fault injection - locking fixes mgag200: - add support for G200eH5 msm: - dpu: add concurrent writeback support for DPU 10.x+ - use LTTPR helpers - GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump - Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() - DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() - DSI: - DSC-related fixes - Rework clock programming - DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks - HDMI: - Rework the driver, enabling the use of the HDMI Connector framework - Bindings: - Added eDP PHY on SA8775P nouveau: - move drm_slave_encoder interface into driver - nvkm: refactor GSP RPC - use LTTPR helpers mediatek: - HDMI fixup and refinement - add MT8188 dsc compatible - MT8365 SoC support panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Improve locking qaic: - Add support for AIC200 renesas: - Fix limits in DT bindings rockchip: - support rk3562-mali - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings - analogix_dp: add eDP support - fix shutodnw solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - handle clock vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 - fix UAf xlnx: - Set correct DMA segment size - use mutex guards - Fix error handling - Fix docs" * tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits) drm/amd/pm: Update feature list for smu_v13_0_6 drm/amdgpu: Add parameter documentation for amdgpu_sync_fence drm/amdgpu/discovery: optionally use fw based ip discovery drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics drm/amdgpu/discovery: check ip_discovery fw file available drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush drm/amd/amdgpu: Increase max rings to enable SDMA page ring drm/amdgpu: Decode deferred error type in gfx aca bank parser drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs drm/amdgpu/mes: clean up SDMA HQD loop drm/amdgpu/mes: enable compute pipes across all MEC drm/amdgpu/mes: drop MES 10.x leftovers drm/amdgpu/mes: optimize compute loop handling drm/amdgpu/sdma: guilty tracking is per instance drm/amdgpu/sdma: fix engine reset handling drm/amdgpu: remove invalid usage of sched.ready drm/amdgpu: add cleaner shader trace point ... 
Pull drm updates from Dave Airlie:
 "Outside of drm there are some rust patches from Danilo who maintains
  that area in here, and some pieces for drm header check tests.

  The major things in here are a new driver supporting the touchbar
  displays on M1/M2, the nova-core stub driver which is just the vehicle
  for adding rust abstractions and start developing a real driver inside
  of.

  xe adds support for SVM with a non-driver specific SVM core
  abstraction that will hopefully be useful for other drivers, along
  with support for shrinking for TTM devices. I'm sure xe and AMD
  support new devices, but the pipeline depth on these things is hard to
  know what they end up being in the marketplace!

  uapi:
   - add mediatek tiled fourcc
   - add support for notifying userspace on device wedged

  new driver:
   - appletbdrm: support for Apple Touchbar displays on m1/m2
   - nova-core: skeleton rust driver to develop nova inside off

  firmware:
   - add some rust firmware pieces

  rust:
   - add 'LocalModule' type alias

  component:
   - add helper to query bound status

  fbdev:
   - fbtft: remove access to page->index

  media:
   - cec: tda998x: import driver from drm

  dma-buf:
   - add fast path for single fence merging

  tests:
   - fix lockdep warnings

  atomic:
   - allow full modeset on connector changes
   - clarify semantics of allow_modeset and drm_atomic_helper_check
   - async-flip: support on arbitary planes
   - writeback: fix UAF
   - Document atomic-state history

  format-helper:
   - support ARGB8888 to ARGB4444 conversions

  buddy:
   - fix multi-root cleanup

  ci:
   - update IGT

  dp:
   - support extended wake timeout
   - mst: fix RAD to string conversion
   - increase DPCD eDP control CAP size to 5 bytes
   - add DPCD eDP v1.5 definition
   - add helpers for LTTPR transparent mode

  panic:
   - encode QR code according to Fido 2.2

  scheduler:
   - add parameter struct for init
   - improve job peek/pop operations
   - optimise drm_sched_job struct layout

  ttm:
   - refactor pool allocation
   - add helpers for TTM shrinker

  panel-orientation:
   - add a bunch of new quirks

  panel:
   - convert panels to multi-style functions
   - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
     LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
     116KHD024006, Lenovo T14s Gen6 Snapdragon
   - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
     kd110n11-51ie, Starry 2082109qfh040022-50e
   - visionox-r66451: use multi-style MIPI-DSI functions
   - raydium-rm67200: Add driver for Raydium RM67200
   - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
   - sony-td4353-jdi: Use MIPI-DSI multi-func interface
   - summit: Add driver for Apple Summit display panel
   - visionox-rm692e5: Add driver for Visionox RM692E5

  bridge:
   - pass full atomic state to various callbacks
   - adv7511: Report correct capabilities
   - it6505: Fix HDCP V compare
   - snd65dsi86: fix device IDs
   - nwl-dsi: set bridge type
   - ti-sn65si83: add error recovery and set bridge type
   - synopsys: add HDMI audio support

  xe:
   - support device-wedged event
   - add mmap support for PCI memory barrier
   - perf pmu integration and expose per-engien activity
   - add EU stall sampling support
   - GPU SVM and Xe SVM implementation
   - use TTM shrinker
   - add survivability mode to allow the driver to do firmware updates
     in critical failure states
   - PXP HWDRM support for MTL and LNL
   - expose package/vram temps over hwmon
   - enable DP tunneling
   - drop mmio_ext abstraction
   - Reject BO evcition if BO is bound to current VM
   - Xe suballocator improvements
   - re-use display vmas when possible
   - add GuC Buffer Cache abstraction
   - PCI ID update for Panther Lake and Battlemage
   - Enable SRIOV for Panther Lake
   - Refactor VRAM manager location

  i915:
   - enable extends wake timeout
   - support device-wedged event
   - Enable DP 128b/132b SST DSC
   - FBC dirty rectangle support for display version 30+
   - convert i915/xe to drm client setup
   - Compute HDMI PLLS for rates not in fixed tables
   - Allow DSB usage when PSR is enabled on LNL+
   - Enable panel replay without full modeset
   - Enable async flips with compressed buffers on ICL+
   - support luminance based brightness via DPCD for eDP
   - enable VRR enable/disable without full modeset
   - allow GuC SLPC default strategies on MTL+ for performance
   - lots of display refactoring in move to struct intel_display

  amdgpu:
   - add device wedged event
   - support async page flips on overlay planes
   - enable broadcast RGB drm property
   - add info ioctl for virt mode
   - OEM i2c support for RGB lights
   - GC 11.5.2 + 11.5.3 support
   - SDMA 6.1.3 support
   - NBIO 7.9.1 + 7.11.2 support
   - MMHUB 1.8.1 + 3.3.2 support
   - DCN 3.6.0 support
   - Add dynamic workload profile switching for GC 10-12
   - support larger VBIOS sizes
   - Mark gttsize parameters as deprecated
   - Initial JPEG queue resset support

  amdkfd:
   - add KFD per process flags for setting precision
   - sync pasid values between KGD and KFD
   - improve GTT/VRAM handling for APUs
   - fix user queue validation on GC7/8
   - SDMA queue reset support

  raedeon:
   - rs400 hyperz fix

  i2c:
   - td998x: drop platform_data, split driver into media and bridge

  ast:
   - transmitter chip detection refactoring
   - vbios display mode refactoring
   - astdp: fix connection status and filter unsupported modes
   - cursor handling refactoring

  imagination:
   - check job dependencies with sched helper

  ivpu:
   - improve command queue handling
   - use workqueue for IRQ handling
   - add support HW fault injection
   - locking fixes

  mgag200:
   - add support for G200eH5

  msm:
   - dpu: add concurrent writeback support for DPU 10.x+
   - use LTTPR helpers
   - GPU:
     - Fix obscure GMU suspend failure
     - Expose syncobj timeline support
     - Extend GPU devcoredump with pagetable info
     - a623 support
     - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
       devcoredump
   - Display:
     - Add cpu-cfg interconnect paths on SM8560 and SM8650
     - Introduce KMS OMMU fault handler, causing devcoredump snapshot
     - Fixed error pointer dereference in msm_kms_init_aspace()
   - DPU:
     - Fix mode_changing handling
     - Add writeback support on SM6150 (QCS615)
     - Fix DSC programming in 1:1:1 topology
     - Reworked hardware resource allocation, moving it to the CRTC code
     - Enabled support for Concurrent WriteBack (CWB) on SM8650
     - Enabled CDM blocks on all relevant platforms
     - Reworked debugfs interface for BW/clocks debugging
     - Clear perf params before calculating bw
     - Support YUV formats on writeback
     - Fixed double inclusion
     - Fixed writeback in YUV formats when using cloned output, Dropped
       wb2_formats_rgb
     - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
       kerneldocs
     - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
   - DSI:
     - DSC-related fixes
     - Rework clock programming
   - DSI PHY:
     - Fix 7nm (and lower) PHY programming
     - Add proper DT schema definitions for DSI PHY clocks
   - HDMI:
     - Rework the driver, enabling the use of the HDMI Connector
       framework
   - Bindings:
     - Added eDP PHY on SA8775P

  nouveau:
   - move drm_slave_encoder interface into driver
   - nvkm: refactor GSP RPC
   - use LTTPR helpers

  mediatek:
   - HDMI fixup and refinement
   - add MT8188 dsc compatible
   - MT8365 SoC support

  panthor:
   - Expose sizes of intenral BOs via fdinfo
   - Fix race between reset and suspend
   - Improve locking

  qaic:
   - Add support for AIC200

  renesas:
   - Fix limits in DT bindings

  rockchip:
   - support rk3562-mali
   - rk3576: Add HDMI support
   - vop2: Add new display modes on RK3588 HDMI0 up to 4K
   - Don't change HDMI reference clock rate
   - Fix DT bindings
   - analogix_dp: add eDP support
   - fix shutodnw

  solomon:
   - Set SPI device table to silence warnings
   - Fix pixel and scanline encoding

  v3d:
   - handle clock

  vc4:
   - Use drm_exec
   - Use dma-resv for wait-BO ioctl
   - Remove seqno infrastructure

  virtgpu:
   - Support partial mappings of GEM objects
   - Reserve VGA resources during initialization
   - Fix UAF in virtgpu_dma_buf_free_obj()
   - Add panic support

  vkms:
   - Switch to a managed modesetting pipeline
   - Add support for ARGB8888
   - fix UAf

  xlnx:
   - Set correct DMA segment size
   - use mutex guards
   - Fix error handling
   - Fix docs"

* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
  drm/amd/pm: Update feature list for smu_v13_0_6
  drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
  drm/amdgpu/discovery: optionally use fw based ip discovery
  drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
  drm/amdgpu/discovery: check ip_discovery fw file available
  drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
  drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
  drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
  drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
  drm/amd/amdgpu: Increase max rings to enable SDMA page ring
  drm/amdgpu: Decode deferred error type in gfx aca bank parser
  drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
  drm/amdgpu/mes: clean up SDMA HQD loop
  drm/amdgpu/mes: enable compute pipes across all MEC
  drm/amdgpu/mes: drop MES 10.x leftovers
  drm/amdgpu/mes: optimize compute loop handling
  drm/amdgpu/sdma: guilty tracking is per instance
  drm/amdgpu/sdma: fix engine reset handling
  drm/amdgpu: remove invalid usage of sched.ready
  drm/amdgpu: add cleaner shader trace point
  ...
fbdev: fsl-diu-fb: add missing device_remove_file() 2025-03-26T21:39:21+00:00 Shixiong Ou oushixiong@kylinos.cn 2025-03-10T01:54:31+00:00 86d16cd12efa547ed43d16ba7a782c1251c80ea8 Call device_remove_file() when driver remove. Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Signed-off-by: Helge Deller <deller@gmx.de> 
Call device_remove_file() when driver remove.

Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
fbcon: Use static attribute groups for sysfs entries 2025-03-26T21:39:21+00:00 Shixiong Ou oushixiong@kylinos.cn 2025-03-14T06:09:41+00:00 26c36247a44098ccab3d16aa7d5329db87aa7236 Using device_create_with_groups() to simplify creation and removal. Same as commit 1083a7be4504 ("tty: Use static attribute groups for sysfs entries"). Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> 
Using device_create_with_groups() to simplify creation and removal.
Same as commit 1083a7be4504 ("tty: Use static attribute groups for
sysfs entries").

Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: sm501fb: Add some geometry checks. 2025-03-26T21:39:21+00:00 Danila Chernetsov listdansp@mail.ru 2025-03-19T01:30:11+00:00 aee50bd88ea5fde1ff4cc021385598f81a65830c Added checks for xoffset, yoffset settings. Incorrect settings of these parameters can lead to errors in sm501fb_pan_ functions. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 5fc404e47bdf ("[PATCH] fb: SM501 framebuffer driver") Signed-off-by: Danila Chernetsov <listdansp@mail.ru> Signed-off-by: Helge Deller <deller@gmx.de> 
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5fc404e47bdf ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: omapfb: Add 'plane' value check 2025-03-26T21:39:21+00:00 Leonid Arapov arapovl839@gmail.com 2025-03-18T21:19:52+00:00 3e411827f31db7f938a30a3c7a7599839401ec30 Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane. The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem. For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not. For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow. Add check for this value. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Signed-off-by: Leonid Arapov <arapovl839@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> 
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.

The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.

For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.

For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.

Add check for this value.

Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.

Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: omapfb: Remove writeback deadcode 2025-03-26T21:39:21+00:00 Leonid Arapov arapovl839@gmail.com 2025-03-18T21:19:51+00:00 b204c29e0d8dce0cbcbec36659686a1ce7e1cbb0 Value of enum parameter 'plane' is initialized in dss_init_overlays and cannot take the value OMAP_DSS_WB. Function dispc_ovl_setup_common could be called with this value of parameter only from dispc_wb_setup, which has never been used and has been removed in commit 4f55bb03801a ("omapfb: Remove unused writeback code"). The code in the if-branch is unreachable. Remove unreachable branch. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Signed-off-by: Leonid Arapov <arapovl839@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> 
Value of enum parameter 'plane' is initialized in dss_init_overlays and
cannot take the value OMAP_DSS_WB. Function dispc_ovl_setup_common could
be called with this value of parameter only from dispc_wb_setup, which has
never been used and has been removed in commit 4f55bb03801a
("omapfb: Remove unused writeback code"). The code in the if-branch is
unreachable.

Remove unreachable branch.

Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.

Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: Refactoring the fbcon packed pixel drawing routines 2025-03-26T21:39:21+00:00 Zsolt Kajtar soci@c64.rulez.org 2025-03-09T18:47:15+00:00 eabb0329308729a9073785705224b4efeed081de The original version duplicated more or less the same algorithms for both system and i/o memory. In this version the drawing algorithms (copy/fill/blit) are separate from the memory access (system and i/o). The two parts are getting combined in the loadable module sources. This also makes it more robust against wrong memory access type or alignment mistakes as there's no direct pointer access or arithmetic in the algorithm sources anymore. Due to liberal use of inlining the compiled result is a single function in all 6 cases, without unnecessary function calls. Unlike earlier the use of macros could be minimized as apparently both gcc and clang is capable now to do the same with inline functions just as well. What wasn't quite the same in the two variants is the support for pixel order reversing. This version is capable to do that for both system and I/O memory, and not only for the latter. As demand for low bits per pixel modes isn't high there's a configuration option to enable this separately for the CFB and SYS modules. The pixel reversing algorithm is different than earlier and was designed so that it can take advantage of bit order reversing instructions on architectures which have them. And even for higher bits per pixel modes like four bpp. One of the shortcomings of the earlier version was the incomplete support for foreign endian framebuffers. Now all three drawing algorithms produce correct output on both endians with native and foreign framebuffers. This is one of the important differences even if otherwise the algorithms don't look too different than before. All three routines work now with aligned native word accesses. As a consequence blitting isn't limited to 32 bits on 64 bit architectures as it was before. The old routines silently assumed that rows are a multiple of the word size. Due to how the new routines function this isn't a requirement any more and access will be done aligned regardless. However if the framebuffer is configured like that then some of the fast paths won't be available. As this code is supposed to be running on all supported architectures it wasn't optimized for a particular one. That doesn't mean I haven't looked at the disassembly. That's where I noticed that it isn't a good idea to use the fallback bitreversing code for example. The low bits per pixel modes should be faster than before as the new routines can blit 4 pixels at a time. On the higher bits per pixel modes I retained the specialized aligned routines so it should be more or less the same, except on 64 bit architectures. There the blitting word size is double now which means 32 BPP isn't done a single pixel a time now. The code was tested on x86, amd64, mips32 and mips64. The latter two in big endian configuration. Originally thought I can get away with the first two, but with such bit twisting code byte ordering is tricky and not really possible to get right without actually verifying it. While writing such routines isn't rocket science a lot of time was spent on making sure that pixel ordering, foreign byte order, various bits per pixels, cpu endianness and word size will give the expected result in all sorts of combinations without making it overly complicated or full with special cases. Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org> Signed-off-by: Helge Deller <deller@gmx.de> 
The original version duplicated more or less the same algorithms for
both system and i/o memory.

In this version the drawing algorithms (copy/fill/blit) are separate
from the memory access (system and i/o). The two parts are getting
combined in the loadable module sources. This also makes it more robust
against wrong memory access type or alignment mistakes as there's no
direct pointer access or arithmetic in the algorithm sources anymore.

Due to liberal use of inlining the compiled result is a single function
in all 6 cases, without unnecessary function calls. Unlike earlier the
use of macros could be minimized as apparently both gcc and clang is
capable now to do the same with inline functions just as well.

What wasn't quite the same in the two variants is the support for pixel
order reversing. This version is capable to do that for both system and
I/O memory, and not only for the latter. As demand for low bits per
pixel modes isn't high there's a configuration option to enable this
separately for the CFB and SYS modules.

The pixel reversing algorithm is different than earlier and was designed
so that it can take advantage of bit order reversing instructions on
architectures which have them. And even for higher bits per pixel modes
like four bpp.

One of the shortcomings of the earlier version was the incomplete
support for foreign endian framebuffers. Now all three drawing
algorithms produce correct output on both endians with native and
foreign framebuffers. This is one of the important differences even if
otherwise the algorithms don't look too different than before.

All three routines work now with aligned native word accesses. As a
consequence blitting isn't limited to 32 bits on 64 bit architectures as
it was before.

The old routines silently assumed that rows are a multiple of the word
size. Due to how the new routines function this isn't a requirement any
more and access will be done aligned regardless. However if the
framebuffer is configured like that then some of the fast paths won't be
available.

As this code is supposed to be running on all supported architectures it
wasn't optimized for a particular one. That doesn't mean I haven't
looked at the disassembly. That's where I noticed that it isn't a good
idea to use the fallback bitreversing code for example.

The low bits per pixel modes should be faster than before as the new
routines can blit 4 pixels at a time.

On the higher bits per pixel modes I retained the specialized aligned
routines so it should be more or less the same, except on 64 bit
architectures. There the blitting word size is double now which means 32
BPP isn't done a single pixel a time now.

The code was tested on x86, amd64, mips32 and mips64. The latter two in
big endian configuration. Originally thought I can get away with the
first two, but with such bit twisting code byte ordering is tricky and
not really possible to get right without actually verifying it.

While writing such routines isn't rocket science a lot of time was spent
on making sure that pixel ordering, foreign byte order, various bits per
pixels, cpu endianness and word size will give the expected result in
all sorts of combinations without making it overly complicated or full
with special cases.

Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>