linux-stable.git/drivers/video, branch v5.4.136

backlight: lm3630a: Fix return code of .update_status() callback

2021-07-20T14:10:45+00:00

[ Upstream commit b9481a667a90ec739995e85f91f3672ca44d6ffa ]

According to  .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.

While touching that also add the error code to the failure message.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Daniel Thompson 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

fbmem: Do not delete the mode that is still in use

2021-07-20T14:10:40+00:00

commit 0af778269a522c988ef0b4188556aba97fb420cc upstream.

The execution of fb_delete_videomode() is not based on the result of the
previous fbcon_mode_deleted(). As a result, the mode is directly deleted,
regardless of whether it is still in use, which may cause UAF.

==================================================================
BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \
drivers/video/fbdev/core/modedb.c:924
Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962

CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x137/0x1be lib/dump_stack.c:118
 print_address_description+0x6c/0x640 mm/kasan/report.c:385
 __kasan_report mm/kasan/report.c:545 [inline]
 kasan_report+0x13d/0x1e0 mm/kasan/report.c:562
 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924
 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746
 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975
 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 18960:
 kasan_save_stack mm/kasan/common.c:48 [inline]
 kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422
 slab_free_hook mm/slub.c:1541 [inline]
 slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574
 slab_free mm/slub.c:3139 [inline]
 kfree+0xca/0x3d0 mm/slub.c:4121
 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104
 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978
 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly")
Signed-off-by: Zhen Lei 
Cc:  # v5.3+
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman

backlight: lm3630a_bl: Put fwnode in error case during ->probe()

2021-07-14T14:53:40+00:00

[ Upstream commit 6d1c32dbedd7d7e7372aa38033ec8782c39f6379 ]

device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Cc: Brian Masney 
Cc: Dan Murphy 
Fixes: 8fbce8efe15cd ("backlight: lm3630a: Add firmware node support")
Signed-off-by: Andy Shevchenko 
Reviewed-by: Brian Masney 
Reviewed-by: Daniel Thompson 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

video: fbdev: imxfb: Fix an error message

2021-07-14T14:53:26+00:00

[ Upstream commit 767d724a160eb1cd00c86fb8c2e21fa1ab3c37ac ]

'ret' is known to be 0 here.
No error code is available, so just remove it from the error message.

Fixes: 72330b0eeefc ("i.MX Framebuffer: Use readl/writel instead of direct pointer deref")
Reviewed-by: Uwe Kleine-König 
Signed-off-by: Christophe JAILLET 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/d7b25026f82659da3c6f7159eea480faa9d738be.1620327302.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin

video: hgafb: correctly handle card detect failure during probe

2021-05-26T10:05:21+00:00

commit 02625c965239b71869326dd0461615f27307ecb3 upstream.

The return value of hga_card_detect() is not properly handled causing
the probe to succeed even though hga_card_detect() failed. Since probe
succeeds, hgafb_open() can be called which will end up operating on an
unmapped hga_vram. This results in an out-of-bounds access as reported
by kernel test robot [1].

To fix this, correctly detect failure of hga_card_detect() by checking
for a non-zero error code.

[1]: https://lore.kernel.org/lkml/20210516150019.GB25903@xsang-OptiPlex-9020/

Fixes: dc13cac4862c ("video: hgafb: fix potential NULL pointer dereference")
Cc: stable 
Reported-by: kernel test robot 
Reviewed-by: Igor Matheus Andrade Torrente 
Signed-off-by: Anirudh Rayabharam 
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20210516192714.25823-1-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman

tty: vt: always invoke vc->vc_sw->con_resize callback

2021-05-26T10:05:20+00:00

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream.

syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.

----------
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 

  int main(int argc, char *argv[])
  {
        const int fd = open("/dev/char/4:1", O_RDWR);
        struct vt_sizes vt = { 0x4100, 2 };

        ioctl(fd, KDSETMODE, KD_GRAPHICS);
        ioctl(fd, VT_RESIZE, &vt);
        ioctl(fd, KDSETMODE, KD_TEXT);
        return 0;
  }
----------

Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().

Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1]
Reported-by: syzbot 
Suggested-by: Linus Torvalds 
Signed-off-by: Tetsuo Handa 
Tested-by: syzbot 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vt: Fix character height handling with VT_RESIZEX

2021-05-26T10:05:20+00:00

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: 
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki 
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vgacon: Record video mode changes with VT_RESIZEX

2021-05-26T10:05:20+00:00

commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream.

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.

Signed-off-by: Maciej W. Rozycki 
Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

video: hgafb: fix potential NULL pointer dereference

2021-05-26T10:05:20+00:00

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.

The return of ioremap if not checked, and can lead to a NULL to be
assigned to hga_vram. Potentially leading to a NULL pointer
dereference.

The fix adds code to deal with this case in the error label and
changes how the hgafb_probe handles the return of hga_card_detect.

Cc: Ferenc Bakonyi 
Cc: Bartlomiej Zolnierkiewicz 
Cc: stable 
Signed-off-by: Igor Matheus Andrade Torrente 
Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

Revert "video: imsttfb: fix potential NULL pointer dereferences"

2021-05-26T10:05:18+00:00

commit ed04fe8a0e87d7b5ea17d47f4ac9ec962b24814a upstream.

This reverts commit 1d84353d205a953e2381044953b7fa31c8c9702d.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.

Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.

Cc: Kangjie Lu 
Cc: Aditya Pakki 
Cc: Finn Thain 
Cc: Bartlomiej Zolnierkiewicz 
Reviewed-by: Rob Herring 
Fixes: 1d84353d205a ("video: imsttfb: fix potential NULL pointer dereferences")
Cc: stable 
Link: https://lore.kernel.org/r/20210503115736.2104747-67-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman