linux-stable.git/drivers/video, branch v5.16.3 Linux kernel stable tree backlight: qcom-wled: Respect enabled-strings in set_brightness 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:59+00:00 41194f2f36dddfc61214bcbf35e8686b42a5cd1d [ Upstream commit ec961cf3241153e0f27d850f1bf0f172e7d27a21 ] The hardware is capable of controlling any non-contiguous sequence of LEDs specified in the DT using qcom,enabled-strings as u32 array, and this also follows from the DT-bindings documentation. The numbers specified in this array represent indices of the LED strings that are to be enabled and disabled. Its value is appropriately used to setup and enable string modules, but completely disregarded in the set_brightness paths which only iterate over the number of strings linearly. Take an example where only string 2 is enabled with qcom,enabled_strings=<2>: this string is appropriately enabled but subsequent brightness changes would have only touched the zero'th brightness register because num_strings is 1 here. This is simply addressed by looking up the string for this index in the enabled_strings array just like the other codepaths that iterate over num_strings. Likewise enabled_strings is now also used in the autodetection path for consistent behaviour: when a list of strings is specified in DT only those strings will be probed for autodetection, analogous to how the number of strings that need to be probed is already bound by qcom,num-strings. After all autodetection uses the set_brightness helpers to set an initial value, which could otherwise end up changing brightness on a different set of strings. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-10-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ec961cf3241153e0f27d850f1bf0f172e7d27a21 ]

The hardware is capable of controlling any non-contiguous sequence of
LEDs specified in the DT using qcom,enabled-strings as u32
array, and this also follows from the DT-bindings documentation.  The
numbers specified in this array represent indices of the LED strings
that are to be enabled and disabled.

Its value is appropriately used to setup and enable string modules, but
completely disregarded in the set_brightness paths which only iterate
over the number of strings linearly.
Take an example where only string 2 is enabled with
qcom,enabled_strings=<2>: this string is appropriately enabled but
subsequent brightness changes would have only touched the zero'th
brightness register because num_strings is 1 here.  This is simply
addressed by looking up the string for this index in the enabled_strings
array just like the other codepaths that iterate over num_strings.

Likewise enabled_strings is now also used in the autodetection path for
consistent behaviour: when a list of strings is specified in DT only
those strings will be probed for autodetection, analogous to how the
number of strings that need to be probed is already bound by
qcom,num-strings.  After all autodetection uses the set_brightness
helpers to set an initial value, which could otherwise end up changing
brightness on a different set of strings.

Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-10-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:53+00:00 4cee8d5c45c2e5b83630c8947196b619ac6996e6 [ Upstream commit 0a139358548968b2ff308257b4fbeec7badcc3e1 ] The kernel already provides appropriate primitives to perform endianness conversion which should be used in favour of manual bit-wrangling. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-4-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a139358548968b2ff308257b4fbeec7badcc3e1 ]

The kernel already provides appropriate primitives to perform endianness
conversion which should be used in favour of manual bit-wrangling.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-4-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
backlight: qcom-wled: Override default length with qcom,enabled-strings 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:55+00:00 585bf131dff85fcb8f08f9f8e2168115ab77bc25 [ Upstream commit 2b4b49602f9feca7b7a84eaa33ad9e666c8aa695 ] The length of qcom,enabled-strings as property array is enough to determine the number of strings to be enabled, without needing to set qcom,num-strings to override the default number of strings when less than the default (which is also the maximum) is provided in DT. This also introduces an extra warning when qcom,num-strings is set, denoting that it is not necessary to set both anymore. It is usually more concise to set just qcom,num-length when a zero-based, contiguous range of strings is needed (the majority of the cases), or to only set qcom,enabled-strings when a specific set of indices is desired. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-6-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2b4b49602f9feca7b7a84eaa33ad9e666c8aa695 ]

The length of qcom,enabled-strings as property array is enough to
determine the number of strings to be enabled, without needing to set
qcom,num-strings to override the default number of strings when less
than the default (which is also the maximum) is provided in DT.

This also introduces an extra warning when qcom,num-strings is set,
denoting that it is not necessary to set both anymore.  It is usually
more concise to set just qcom,num-length when a zero-based, contiguous
range of strings is needed (the majority of the cases), or to only set
qcom,enabled-strings when a specific set of indices is desired.

Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-6-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
backlight: qcom-wled: Fix off-by-one maximum with default num_strings 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:54+00:00 007cfb6373595ab3a52d3f8a7a492fc3541812e2 [ Upstream commit 5ada78b26f935f8751852dffa24f6b545b1d2517 ] When not specifying num-strings in the DT the default is used, but +1 is added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead of 3 and 4 respectively, causing out-of-bounds reads and register read/writes. This +1 exists for a deficiency in the DT parsing code, and is simply omitted entirely - solving this oob issue - by parsing the property separately much like qcom,enabled-strings. This also enables more stringent checks on the maximum value when qcom,enabled-strings is provided in the DT, by parsing num-strings after enabled-strings to allow it to check against (and in a subsequent patch override) the length of enabled-strings: it is invalid to set num-strings higher than that. The DT currently utilizes it to get around an incorrect fixed read of four elements from that array (has been addressed in a prior patch) by setting a lower num-strings where desired. Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-5-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5ada78b26f935f8751852dffa24f6b545b1d2517 ]

When not specifying num-strings in the DT the default is used, but +1 is
added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead
of 3 and 4 respectively, causing out-of-bounds reads and register
read/writes.  This +1 exists for a deficiency in the DT parsing code,
and is simply omitted entirely - solving this oob issue - by parsing the
property separately much like qcom,enabled-strings.

This also enables more stringent checks on the maximum value when
qcom,enabled-strings is provided in the DT, by parsing num-strings after
enabled-strings to allow it to check against (and in a subsequent patch
override) the length of enabled-strings: it is invalid to set
num-strings higher than that.
The DT currently utilizes it to get around an incorrect fixed read of
four elements from that array (has been addressed in a prior patch) by
setting a lower num-strings where desired.

Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-5-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
backlight: qcom-wled: Pass number of elements to read to read_u32_array 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:52+00:00 d4397f8dcd04c4be5e992c7325842027a7a19fc3 [ Upstream commit e29e24bdabfeddbf8b1a4ecac1af439a85150438 ] of_property_read_u32_array takes the number of elements to read as last argument. This does not always need to be 4 (sizeof(u32)) but should instead be the size of the array in DT as read just above with of_property_count_elems_of_size. To not make such an error go unnoticed again the driver now bails accordingly when of_property_read_u32_array returns an error. Surprisingly the indentation of newlined arguments is lining up again after prepending `rc = `. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-3-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e29e24bdabfeddbf8b1a4ecac1af439a85150438 ]

of_property_read_u32_array takes the number of elements to read as last
argument. This does not always need to be 4 (sizeof(u32)) but should
instead be the size of the array in DT as read just above with
of_property_count_elems_of_size.

To not make such an error go unnoticed again the driver now bails
accordingly when of_property_read_u32_array returns an error.
Surprisingly the indentation of newlined arguments is lining up again
after prepending `rc = `.

Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-3-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
backlight: qcom-wled: Validate enabled string indices in DT 2022-01-27T11:01:52+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-11-15T20:34:51+00:00 1f04c0d3288991fd950a4733ba28b4bbc4ea38b3 [ Upstream commit c05b21ebc5bce3ecc78c2c71afd76d92c790a2ac ] The strings passed in DT may possibly cause out-of-bounds register accesses and should be validated before use. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-2-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c05b21ebc5bce3ecc78c2c71afd76d92c790a2ac ]

The strings passed in DT may possibly cause out-of-bounds register
accesses and should be validated before use.

Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-2-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards 2022-01-20T08:12:20+00:00 Javier Martinez Canillas javierm@redhat.com 2022-01-10T09:56:25+00:00 c923276ddd49a299fdbd7858bcf15d7a1700932d commit 0499f419b76f94ede08304aad5851144813ac55c upstream. The vga16fb framebuffer driver only supports Enhanced Graphics Adapter (EGA) and Video Graphics Array (VGA) 16 color graphic cards. But it doesn't check if the adapter is one of those or if a VGA16 mode is used. This means that the driver will be probed even if a VESA BIOS Extensions (VBE) or Graphics Output Protocol (GOP) interface is used. This issue has been present for a long time but it was only exposed by commit d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") since the platform device registration to match the {vesa,efi}fb drivers is done later as a consequence of that change. All non-x86 architectures though treat orig_video_isVGA as a boolean so only do the supported video mode check for x86 and not for other arches. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215001 Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") Reported-by: Kris Karas <bugs-a21@moonlit-rail.com> Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Kris Karas <bugs-a21@moonlit-rail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-3-javierm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0499f419b76f94ede08304aad5851144813ac55c upstream.

The vga16fb framebuffer driver only supports Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.

But it doesn't check if the adapter is one of those or if a VGA16 mode
is used. This means that the driver will be probed even if a VESA BIOS
Extensions (VBE) or Graphics Output Protocol (GOP) interface is used.

This issue has been present for a long time but it was only exposed by
commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") since the platform device registration to match
the {vesa,efi}fb drivers is done later as a consequence of that change.

All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the supported video mode check for x86 and not for other arches.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215001
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-3-javierm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb 2021-12-31T13:57:45+00:00 Alex Deucher alexander.deucher@amd.com 2021-12-23T03:41:18+00:00 9a45ac2320d0a6ae01880a30d4b86025fce4061b Add a function for drivers to check if the a firmware initialized fb is corresponds to their aperture. This allows drivers to check if the device corresponds to what the firmware set up as the display device. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture.  This allows drivers to check if the
device corresponds to what the firmware set up as the display device.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2021-12-05T17:13:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-12-05T17:13:20+00:00 5163953950ab63ce296398b013d9d16bf2b40940 Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve a number of reported problems. They include: - liteuart serial driver fixes - 8250_pci serial driver fixes for pericom devices - 8250 RTS line control fix while in RS-485 mode - tegra serial driver fix - msm_serial driver fix - pl011 serial driver new id - fsl_lpuart revert of broken change - 8250_bcm7271 serial driver fix - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1 - vgacon fix for reported problem All of these, except for the 8250_bcm7271 fix have been in linux-next with no reported problem. The 8250_bcm7271 fix was added to the tree on Friday so no chance to be linux-next yet. But it should be fine as the affected developers submitted it" * tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_bcm7271: UART errors after resuming from S2 serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250: Fix RTS modem control while in rs485 mode Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: liteuart: relax compile-test dependencies serial: liteuart: fix minor-number leak on probe errors serial: liteuart: fix use-after-free and memleak on unbind serial: liteuart: Fix NULL pointer dereference in ->remove() vgacon: Propagate console boot parameters before calling `vc_resize' tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: core: fix transmit-buffer reset and memleak MAINTAINERS: Add rpmsg tty driver maintainer 
Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for 5.16-rc4 to
  resolve a number of reported problems.

  They include:

   - liteuart serial driver fixes

   - 8250_pci serial driver fixes for pericom devices

   - 8250 RTS line control fix while in RS-485 mode

   - tegra serial driver fix

   - msm_serial driver fix

   - pl011 serial driver new id

   - fsl_lpuart revert of broken change

   - 8250_bcm7271 serial driver fix

   - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1

   - vgacon fix for reported problem

  All of these, except for the 8250_bcm7271 fix have been in linux-next
  with no reported problem. The 8250_bcm7271 fix was added to the tree
  on Friday so no chance to be linux-next yet. But it should be fine as
  the affected developers submitted it"

* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_bcm7271: UART errors after resuming from S2
  serial: 8250_pci: rewrite pericom_do_set_divisor()
  serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  serial: 8250: Fix RTS modem control while in rs485 mode
  Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
  serial: liteuart: relax compile-test dependencies
  serial: liteuart: fix minor-number leak on probe errors
  serial: liteuart: fix use-after-free and memleak on unbind
  serial: liteuart: Fix NULL pointer dereference in ->remove()
  vgacon: Propagate console boot parameters before calling `vc_resize'
  tty: serial: msm_serial: Deactivate RX DMA for polling support
  serial: pl011: Add ACPI SBSA UART match id
  serial: core: fix transmit-buffer reset and memleak
  MAINTAINERS: Add rpmsg tty driver maintainer
Merge tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip 2021-11-26T17:54:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-26T17:54:13+00:00 6b54698aec0b59943f7e8a88151bdf208de990d0 Pull xen fixes from Juergen Gross: - Kconfig fix to make it possible to control building of the privcmd driver - three fixes for issues identified by the kernel test robot - a five-patch series to simplify timeout handling for Xen PV driver initialization - two patches to fix error paths in xenstore/xenbus driver initialization * tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: make HYPERVISOR_set_debugreg() always_inline xen: make HYPERVISOR_get_debugreg() always_inline xen: detect uninitialized xenbus in xenbus_init xen: flag xen_snd_front to be not essential for system boot xen: flag pvcalls-front to be not essential for system boot xen: flag hvc_xen to be not essential for system boot xen: flag xen_drm_front to be not essential for system boot xen: add "not_essential" flag to struct xenbus_driver xen/pvh: add missing prototype to header xen: don't continue xenstore initialization in case of errors xen/privcmd: make option visible in Kconfig 
Pull xen fixes from Juergen Gross:

 - Kconfig fix to make it possible to control building of the privcmd
   driver

 - three fixes for issues identified by the kernel test robot

 - a five-patch series to simplify timeout handling for Xen PV driver
   initialization

 - two patches to fix error paths in xenstore/xenbus driver
   initialization

* tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: make HYPERVISOR_set_debugreg() always_inline
  xen: make HYPERVISOR_get_debugreg() always_inline
  xen: detect uninitialized xenbus in xenbus_init
  xen: flag xen_snd_front to be not essential for system boot
  xen: flag pvcalls-front to be not essential for system boot
  xen: flag hvc_xen to be not essential for system boot
  xen: flag xen_drm_front to be not essential for system boot
  xen: add "not_essential" flag to struct xenbus_driver
  xen/pvh: add missing prototype to header
  xen: don't continue xenstore initialization in case of errors
  xen/privcmd: make option visible in Kconfig