Copying color maps to userspace doesn't check the value of to->start,
which will cause kernel heap buffer OOB read due to signedness wraps.

CVE-2016-8405

Link: http://lkml.kernel.org/r/20170105224249.GA50925@beast
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Peter Pi (@heisecode) of Trend Micro
Cc: Min Chong <mchong@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xen updates from Juergen Gross:
 "Xen features and fixes for 4.10

  These are some fixes, a move of some arm related headers to share them
  between arm and arm64 and a series introducing a helper to make code
  more readable.

  The most notable change is David stepping down as maintainer of the
  Xen hypervisor interface. This results in me sending you the pull
  requests for Xen related code from now on"

* tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
  xen/balloon: Only mark a page as managed when it is released
  xenbus: fix deadlock on writes to /proc/xen/xenbus
  xen/scsifront: don't request a slot on the ring until request is ready
  xen/x86: Increase xen_e820_map to E820_X_MAX possible entries
  x86: Make E820_X_MAX unconditionally larger than E820MAX
  xen/pci: Bubble up error and fix description.
  xen: xenbus: set error code on failure
  xen: set error code on failures
  arm/xen: Use alloc_percpu rather than __alloc_percpu
  arm/arm64: xen: Move shared architecture headers to include/xen/arm
  xen/events: use xen_vcpu_id mapping for EVTCHNOP_status
  xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
  xen-scsifront: Add a missing call to kfree
  MAINTAINERS: update XEN HYPERVISOR INTERFACE
  xenfs: Use proc_create_mount_point() to create /proc/xen
  xen-platform: use builtin_pci_driver
  xen-netback: fix error handling output
  xen: make use of xenbus_read_unsigned() in xenbus
  xen: make use of xenbus_read_unsigned() in xen-pciback
  xen: make use of xenbus_read_unsigned() in xen-fbfront
  ...

Pull tty/serial updates from Greg KH:
 "Here's the tty/serial patchset for 4.10-rc1.

  It's been a quiet kernel cycle for this subsystem, just a small number
  of changes. A few new serial drivers, and some cleanups to the old
  vgacon logic, and other minor serial driver changes as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
  serial: 8250_mid fix calltrace when hotplug 8250 serial controller
  console: Move userspace I/O out of console_lock to fix lockdep warning
  tty: nozomi: avoid sprintf buffer overflow
  serial: 8250_pci: Detach low-level driver during PCI error recovery
  serial: core: don't check port twice in a row
  mxs-auart: count FIFO overrun errors
  serial: 8250_dw: Add support for IrDA SIR mode
  serial: 8250: Expose set_ldisc function
  serial: 8250: Add IrDA to UART capabilities
  serial: 8250_dma: power off device after TX is done
  serial: 8250_port: export serial8250_rpm_{get|put}_tx()
  serial: sunsu: Free memory when probe fails
  serial: sunhv: Free memory when remove() is called
  vt: fix Scroll Lock LED trigger name
  tty: typo in comments in drivers/tty/vt/keyboard.c
  tty: amba-pl011: Add earlycon support for SBSA UART
  tty: nozomi: use permission-specific DEVICE_ATTR variants
  tty: serial: Make the STM32 serial port depend on it's arch
  serial: ifx6x60: Free memory when probe fails
  serial: ioc4_serial: Free memory when kzalloc fails during probe
  ...

Pull drm updates from Dave Airlie:
 "This is the main pull request for drm for 4.10 kernel.

  New drivers:
   - ZTE VOU display driver (zxdrm)
   - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson)
   - MXSFB support (mxsfb)

  Core:
   - Format handling has been reworked
   - Better atomic state debugging
   - drm_mm leak debugging
   - Atomic explicit fencing support
   - fbdev helper ops
   - Documentation updates
   - MST fbcon fixes

  Bridge:
   - Silicon Image SiI8620 driver

  Panel:
   - Add support for new simple panels

  i915:
   - GVT Device model
   - Better HDMI2.0 support on skylake
   - More watermark fixes
   - GPU idling rework for suspend/resume
   - DP Audio workarounds
   - Scheduler prep-work
   - Opregion CADL handling
   - GPU scheduler and priority boosting

  amdgfx/radeon:
   - Support for virtual devices
   - New VM manager for non-contig VRAM buffers
   - UVD powergating
   - SI register header cleanup
   - Cursor fixes
   - Powermanagement fixes

  nouveau:
   - Powermangement reworks for better voltage/clock changes
   - Atomic modesetting support
   - Displayport Multistream (MST) support.
   - GP102/104 hang and cursor fixes
   - GP106 support

  hisilicon:
   - hibmc support (BMC chip for aarch64 servers)

  armada:
   - add tracing support for overlay change
   - refactor plane support
   - de-midlayer the driver

  omapdrm:
   - Timing code cleanups

  rcar-du:
   - R8A7792/R8A7796 support
   - Misc fixes.

  sunxi:
   - A31 SoC display engine support

  imx-drm:
   - YUV format support
   - Cleanup plane atomic update

  mali-dp:
   - Misc fixes

  dw-hdmi:
   - Add support for HDMI i2c master controller

  tegra:
   - IOMMU support fixes
   - Error handling fixes

  tda998x:
   - Fix connector registration
   - Improved robustness
   - Fix infoframe/audio compliance

  virtio:
   - fix busid issues
   - allocate more vbufs

  qxl:
   - misc fixes and cleanups.

  vc4:
   - Fragment shader threading
   - ETC1 support
   - VEC (tv-out) support

  msm:
   - A5XX GPU support
   - Lots of atomic changes

  tilcdc:
   - Misc fixes and cleanups.

  etnaviv:
   - Fix dma-buf export path
   - DRAW_INSTANCED support
   - fix driver on i.MX6SX

  exynos:
   - HDMI refactoring

  fsl-dcu:
   - fbdev changes"

* tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits)
  drm/nouveau/kms/nv50: fix atomic regression on original G80
  drm/nouveau/bl: Do not register interface if Apple GMUX detected
  drm/nouveau/bl: Assign different names to interfaces
  drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
  drm/nouveau/ltc: protect clearing of comptags with mutex
  drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
  drm/nouveau/core: recognise GP106 chipset
  drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
  drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
  drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
  drm/nouveau/fifo/gf100-: recover from host mmu faults
  drm: Add fake controlD* symlinks for backwards compat
  drm/vc4: Don't use drm_put_dev
  drm/vc4: Document VEC DT binding
  drm/vc4: Add support for the VEC (Video Encoder) IP
  drm: Add TV connector states to drm_connector_state
  drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
  drm/vc4: Fix ->clock_select setting for the VEC encoder
  drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
  drm/amdgpu: use pin rather than pin_restricted in a few cases
  ...

Pull documentation update from Jonathan Corbet:
 "These are the documentation changes for 4.10.

  It's another busy cycle for the docs tree, as the sphinx conversion
  continues. Highlights include:

   - Further work on PDF output, which remains a bit of a pain but
     should be more solid now.

   - Five more DocBook template files converted to Sphinx. Only 27 to
     go... Lots of plain-text files have also been converted and
     integrated.

   - Images in binary formats have been replaced with more
     source-friendly versions.

   - Various bits of organizational work, including the renaming of
     various files discussed at the kernel summit.

   - New documentation for the device_link mechanism.

  ... and, of course, lots of typo fixes and small updates"

* tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits)
  dma-buf: Extract dma-buf.rst
  Update Documentation/00-INDEX
  docs: 00-INDEX: document directories/files with no docs
  docs: 00-INDEX: remove non-existing entries
  docs: 00-INDEX: add missing entries for documentation files/dirs
  docs: 00-INDEX: consolidate process/ and admin-guide/ description
  scripts: add a script to check if Documentation/00-INDEX is sane
  Docs: change sh -> awk in REPORTING-BUGS
  Documentation/core-api/device_link: Add initial documentation
  core-api: remove an unexpected unident
  ppc/idle: Add documentation for powersave=off
  Doc: Correct typo, "Introdution" => "Introduction"
  Documentation/atomic_ops.txt: convert to ReST markup
  Documentation/local_ops.txt: convert to ReST markup
  Documentation/assoc_array.txt: convert to ReST markup
  docs-rst: parse-headers.pl: cleanup the documentation
  docs-rst: fix media cleandocs target
  docs-rst: media/Makefile: reorganize the rules
  docs-rst: media: build SVG from graphviz files
  docs-rst: replace bayer.png by a SVG image
  ...

Pull EFI updates from Ingo Molnar:
 "The main changes in this development cycle were:

   - Implement EFI dev path parser and other changes to fully support
     thunderbolt devices on Apple Macbooks (Lukas Wunner)

   - Add RNG seeding via the EFI stub, on ARM/arm64 (Ard Biesheuvel)

   - Expose EFI framebuffer configuration to user-space, to improve
     tooling (Peter Jones)

   - Misc fixes and cleanups (Ivan Hu, Wei Yongjun, Yisheng Xie, Dan
     Carpenter, Roy Franz)"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub: Make efi_random_alloc() allocate below 4 GB on 32-bit
  thunderbolt: Compile on x86 only
  thunderbolt, efi: Fix Kconfig dependencies harder
  thunderbolt, efi: Fix Kconfig dependencies
  thunderbolt: Use Device ROM retrieved from EFI
  x86/efi: Retrieve and assign Apple device properties
  efi: Allow bitness-agnostic protocol calls
  efi: Add device path parser
  efi/arm*/libstub: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table
  efi/libstub: Add random.c to ARM build
  efi: Add support for seeding the RNG from a UEFI config table
  MAINTAINERS: Add ARM and arm64 EFI specific files to EFI subsystem
  efi/libstub: Fix allocation size calculations
  efi/efivar_ssdt_load: Don't return success on allocation failure
  efifb: Show framebuffer layout as device attributes
  efi/efi_test: Use memdup_user() as a cleanup
  efi/efi_test: Fix uninitialized variable 'rv'
  efi/efi_test: Fix uninitialized variable 'datasize'
  efi/arm*: Fix efi_init() error handling
  efi: Remove unused include of <linux/version.h>

OpenRISC does not support VGA console, so prevent that kconfig symbol
from being enabled for OpenRISC, thus fixing these build errors:

   drivers/built-in.o: In function `vgacon_save_screen':
   vgacon.c:(.text+0x20e0): undefined reference to `screen_info'
   vgacon.c:(.text+0x20e8): undefined reference to `screen_info'
   drivers/built-in.o: In function `vgacon_init':
   vgacon.c:(.text+0x284c): undefined reference to `screen_info'
   vgacon.c:(.text+0x2850): undefined reference to `screen_info'
   drivers/built-in.o: In function `vgacon_startup':
   vgacon.c:(.text+0x28d8): undefined reference to `screen_info'
   drivers/built-in.o:vgacon.c:(.text+0x28f0): more undefined references to `screen_info' follow

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Linux 4.9-rc8

Daniel requested this so we could apply some follow on fixes cleanly to -next.