linux-stable.git/drivers/video, branch v3.0.28

backlight: fix typo in tosa_lcd.c

2012-04-02T16:27:19+00:00

commit 8da00edc1069f01c34510fa405dc15d96c090a3f upstream.

Fix typo in drivers/video/backlight/tosa_lcd.c
"tosa_lcd_reume" should be "tosa_lcd_resume".

Signed-off-by: Masanari Iida 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

udlfb: remove sysfs framebuffer device with USB .disconnect()

2012-04-02T16:27:11+00:00

commit ce880cb860f36694d2cdebfac9e6ae18176fe4c4 upstream.

The USB graphics card driver delays the unregistering of the framebuffer
device to a workqueue, which breaks the userspace visible remove uevent
sequence. Recent userspace tools started to support USB graphics card
hotplug out-of-the-box and rely on proper events sent by the kernel.

The framebuffer device is a direct child of the USB interface which is
removed immediately after the USB .disconnect() callback. But the fb device
in /sys stays around until its final cleanup, at a time where all the parent
devices have been removed already.

To work around that, we remove the sysfs fb device directly in the USB
.disconnect() callback and leave only the cleanup of the internal fb
data to the delayed work.

Before:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 remove   /2-1.2:1.0/graphics/fb0 (graphics)

After:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)

Tested-by: Bernie Thompson 
Acked-by: Bernie Thompson 
Signed-off-by: Kay Sievers 
Signed-off-by: Florian Tobias Schandinat 
Signed-off-by: Greg Kroah-Hartman

OMAPDSS: HDMI: PHY burnout fix

2012-03-12T17:32:59+00:00

commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream.

A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board
if the HDMI PHY is kept powered on when the cable is not connected.

This patch solves the problem by adding hot-plug-detection into the HDMI
IP driver. This is not a real HPD support in the sense that nobody else
than the IP driver gets to know about the HPD events, but is only meant
to fix the HW bug.

The strategy is simple: If the display device is turned off by the user,
the PHY power is set to OFF. When the display device is turned on by the
user, the PHY power is set either to LDOON or TXON, depending on whether
the HDMI cable is connected.

The reason to avoid PHY OFF when the display device is on, but the cable
is disconnected, is that when the PHY is turned OFF, the HDMI IP is not
"ticking" and thus the DISPC does not receive pixel clock from the HDMI
IP. This would, for example, prevent any VSYNCs from happening, and
would thus affect the users of omapdss. By using LDOON when the cable is
disconnected we'll avoid the HW bug, but keep the HDMI working as usual
from the user's point of view.

Signed-off-by: Tomi Valkeinen 
Signed-off-by: Greg Kroah-Hartman

OMAP: DSS2: HDMI: use default dividers

2012-03-12T17:32:58+00:00

commit 8d88767a4377171752c22ac39bcb2b505eb751da upstream.

Use default regn and regm2 dividers in the hdmi driver if the board file
does not define them.

Cc: Mythri P K 
Acked-by: Tony Lindgren 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Greg Kroah-Hartman

atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume

2012-02-13T19:06:09+00:00

commit 9f1065032ceb7e86c7c9f16bb86518857e88a172 upstream.

An error was existing in the saving of CONTRAST_CTR register
across suspend/resume.

Signed-off-by: Hubert Feurstein 
Signed-off-by: Nicolas Ferre 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD 
Signed-off-by: Florian Tobias Schandinat 
Signed-off-by: Greg Kroah-Hartman

offb: Fix bug in calculating requested vram size

2012-01-12T19:35:00+00:00

commit c055fe0797b7bd8f6f21a13598a55a16d5c13ae7 upstream.

We used to try to request 8 times more vram than needed, which would
fail if the card has a too small BAR (observed with qemu & kvm).

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman

offb: Fix setting of the pseudo-palette for >8bpp

2012-01-12T19:34:59+00:00

commit 1bb0b7d21584b3f878e2bc880db62351ddee5185 upstream.

When using a >8bpp framebuffer, offb advertises truecolor, not directcolor,
and doesn't touch the color map even if it has a corresponding access method
for the real hardware.

Thus it needs to set the pseudo-palette with all 3 components of the color,
like other truecolor framebuffers, not with copies of the color index like
a directcolor framebuffer would do.

This went unnoticed for a long time because it's pretty hard to get offb
to kick in with anything but 8bpp (old BootX under MacOS will do that and
qemu does it).

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman

viafb: correct sync polarity for OLPC DCON

2011-12-09T16:52:23+00:00

commit a32839696a8eef813a1aff604fbad9a32dff6c95 upstream.

While the OLPC display appears to be able to handle either positive
or negative sync, the Display Controller only recognises positive sync.

This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and
fixes a recent regression where the XO-1.5 DCON could no longer be
frozen. Thanks to Florian Tobias Schandinat for helping identify
the fix.

Test case: from a vt,
	echo 1 > /sys/devices/platform/dcon/freeze
should cause the current screen contents to freeze, rather than garbage being
displayed.

Signed-off-by: Daniel Drake 
Signed-off-by: Florian Tobias Schandinat 
Signed-off-by: Greg Kroah-Hartman

viafb: improve pitch handling

2011-11-11T17:36:13+00:00

commit 936a3f770b8de7042d793272f008ef1bb08522e9 upstream.

This patch adds checks for minimum and maximum pitch size to prevent
invalid settings which could otherwise crash the machine. Also the
alignment is done in a slightly more readable way.

Signed-off-by: Florian Tobias Schandinat 
Signed-off-by: Greg Kroah-Hartman

viafb: use display information in info not in var for panning

2011-11-11T17:36:12+00:00

commit d933990c57b498c092ceef591c7c5d69dbfe9f30 upstream.

As Laurent pointed out we must not use any information in the passed
var besides xoffset, yoffset and vmode as otherwise applications
might abuse it. Also use the aligned fix.line_length and not the
(possible) unaligned xres_virtual.

Signed-off-by: Florian Tobias Schandinat 
Reported-by: Laurent Pinchart 
Acked-by: Laurent Pinchart 
Signed-off-by: Greg Kroah-Hartman