linux-stable.git/drivers/video/fbdev/efifb.c, branch linux-5.6.y

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54+00:00

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter 

From: Maarten Lankhorst 
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

video: constify fb ops across all drivers

2019-12-05T08:57:53+00:00

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

This does not cover all drivers; some actually modify the fbops struct,
for example to adjust for different configurations, and others do more
involved things that I'd rather not touch in practically obsolete
drivers. Mostly this is the low hanging fruit where we can add "const"
and be done with it.

v3:
- un-constify atyfb, mb862xx, nvidia and uvesabf (0day)

v2:
- fix typo (Christophe de Dinechin)
- use "static const" instead of "const static" in mx3fb.c
- also constify smscufx.c

Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Daniel Vetter 
Signed-off-by: Jani Nikula 
Link: https://patchwork.freedesktop.org/patch/msgid/ce67f14435f3af498f2e8bf35ce4be11f7504132.1575390740.git.jani.nikula@intel.com

PCI: Add PCI_STD_NUM_BARS for the number of standard BARs

2019-10-14T15:22:26+00:00

Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END.  However, that requires the unusual test
"i <= PCI_STD_RESOURCE_END" rather than something the typical
"i < PCI_STD_NUM_BARS".

Add a definition for PCI_STD_NUM_BARS and change loops to use the more
idiomatic C style to help avoid fencepost errors.

Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com
Signed-off-by: Denis Efremov 
Signed-off-by: Bjorn Helgaas 
Acked-by: Sebastian Ott 			# arch/s390/
Acked-by: Bartlomiej Zolnierkiewicz 	# video/fbdev/
Acked-by: Gustavo Pimentel 	# pci/controller/dwc/
Acked-by: Jack Wang 		# scsi/pm8001/
Acked-by: Martin K. Petersen 	# scsi/pm8001/
Acked-by: Ulf Hansson 			# memstick/

efifb: BGRT: Improve efifb_bgrt_sanity_check

2019-08-19T13:52:23+00:00

For various reasons, at least with x86 EFI firmwares, the xoffset and
yoffset in the BGRT info are not always reliable.

Extensive testing has shown that when the info is correct, the
BGRT image is always exactly centered horizontally (the yoffset variable
is more variable and not always predictable).

This commit simplifies / improves the bgrt_sanity_check to simply
check that the BGRT image is exactly centered horizontally and skips
(re)drawing it when it is not.

This fixes the BGRT image sometimes being drawn in the wrong place.

Cc: stable@vger.kernel.org
Fixes: 88fe4ceb2447 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions")
Signed-off-by: Hans de Goede 
Cc: Peter Jones ,
Signed-off-by: Bartlomiej Zolnierkiewicz 
Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com

video: fbdev: don't print error message on framebuffer_alloc() failure

2019-06-28T10:30:08+00:00

framebuffer_alloc() can fail only on kzalloc() memory allocation
failure and since kzalloc() will print error message in such case
we can omit printing extra error message in drivers (which BTW is
what the majority of framebuffer_alloc() users is doing already).

Cc: "Bruno Prémont" 
Cc: Jiri Kosina 
Cc: Benjamin Tissoires 
Signed-off-by: Bartlomiej Zolnierkiewicz

efifb: BGRT: Add check for new BGRT status field rotation bits

2019-06-21T13:13:14+00:00

Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer
reserved. These bits are now used to indicate if the image needs to be
rotated before being displayed.

The efifb code does not support rotating the image before copying it to
the screen.

This commit adds a check for these new bits and if they are set leaves the
fb contents as is instead of trying to use the un-rotated BGRT image.

Signed-off-by: Hans de Goede 
Acked-by: Ard Biesheuvel 
Cc: Peter Jones 
Signed-off-by: Bartlomiej Zolnierkiewicz

fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types

2019-05-17T09:07:42+00:00

The following commit:

  38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.

As reported by James, this breaks some x86 systems:

  [ 1.173368] efifb: probing for efifb
  [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
  [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
  [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5

The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.

So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.

Reported-by: James Hilliard 
Tested-by: James Hilliard 
Signed-off-by: Ard Biesheuvel 
Cc:  # v4.19+
Cc: Borislav Petkov 
Cc: James Morse 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Peter Jones 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar

efifb: Omit memory map check on legacy boot

2019-03-29T06:34:59+00:00

Since the following commit:

  38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

efifb_probe() checks its memory range via efi_mem_desc_lookup(),
and this leads to a spurious error message:

   EFI_MEMMAP is not enabled

at every boot on KVM.  This is quite annoying since the error message
appears even if you set "quiet" boot option.

Since this happens on legacy boot, which strangely enough exposes
a EFI framebuffer via screen_info, let's double check that we are
doing an EFI boot before attempting to access the EFI memory map.

Reported-by: Takashi Iwai 
Tested-by: Takashi Iwai 
Signed-off-by: Ard Biesheuvel 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Peter Jones 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190328193429.21373-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar

efifb: BGRT: Add nobgrt option

2018-09-26T16:11:22+00:00

In some setups restoring the BGRT logo is undesirable, allow passing
video=efifb:nobgrt on the kernel commandline to disable it.

Reported-by: David Herrmann 
Signed-off-by: Hans de Goede 
Reviewed-by: David Herrmann 
Signed-off-by: Bartlomiej Zolnierkiewicz

Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linux

2018-08-23T22:44:58+00:00

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "Mostly small fixes and cleanups for fb drivers (the biggest updates
  are for udlfb and pxafb drivers). This also adds deferred console
  takeover support to the console code and efifb driver.

  Summary:

   - add support for deferred console takeover, when enabled defers
     fbcon taking over the console from the dummy console until the
     first text is displayed on the console - together with the "quiet"
     kernel commandline option this allows fbcon to still be used
     together with a smooth graphical bootup (Hans de Goede)

   - improve console locking debugging code (Thomas Zimmermann)

   - copy the ACPI BGRT boot graphics to the framebuffer when deferred
     console takeover support is used in efifb driver (Hans de Goede)

   - update udlfb driver - fix lost console when the user unplugs a USB
     adapter, fix the screen corruption issue, fix locking and add some
     performance optimizations (Mikulas Patocka)

   - update pxafb driver - fix using uninitialized memory, switch to
     devm_* API, handle initialization errors and add support for
     lcd-supply regulator (Daniel Mack)

   - add support for boards booted with a DeviceTree in pxa3xx_gcu
     driver (Daniel Mack)

   - rename omap2 module to omap2fb.ko to avoid conflicts with omap1
     driver (Arnd Bergmann)

   - enable ACPI-based enumeration for goldfishfb driver (Yu Ning)

   - fix goldfishfb driver to make user space Android code use 60 fps
     (Christoffer Dall)

   - print big fat warning when nomodeset kernel parameter is used in
     vgacon driver (Lyude Paul)

   - remove VLA usage from fsl-diu-fb driver (Kees Cook)

   - misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
     Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
     Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)

   - misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)"

* tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits)
  Documentation/fb: corrections for fbcon.txt
  fbcon: Do not takeover the console from atomic context
  dummycon: Stop exporting dummycon_[un]register_output_notifier
  fbcon: Only defer console takeover if the current console driver is the dummycon
  fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin
  fbdev: omap2: omapfb: fix ifnullfree.cocci warnings
  fbdev: omap2: omapfb: fix bugon.cocci warnings
  fbdev: omap2: omapfb: fix boolreturn.cocci warnings
  fb: amifb: fix build warnings when not builtin
  fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set
  console: Replace #if 0 with atomic var 'ignore_console_lock_warning'
  udlfb: use spin_lock_irq instead of spin_lock_irqsave
  udlfb: avoid prefetch
  udlfb: optimization - test the backing buffer
  udlfb: allow reallocating the framebuffer
  udlfb: set line_length in dlfb_ops_set_par
  udlfb: handle allocation failure
  udlfb: set optimal write delay
  udlfb: make a local copy of fb_ops
  udlfb: don't switch if we are switching to the same videomode
  ...