linux-stable.git/drivers/video/fbdev/aty, branch v5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

fbdev: Use of_node_name_eq for node name comparisons

2019-02-08T18:24:45+00:00

Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which omap is.

Signed-off-by: Rob Herring 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Bartlomiej Zolnierkiewicz

atyfb: fix debugging printks

2018-10-08T10:57:35+00:00

This patch fixes the debugging printks. Use pr_cont, so that the lines are
not broken up. Use printk when starting a new line (a long string of
pr_cont's without any printks causes missing characters in the console
output on sparc).

Signed-off-by: Mikulas Patocka 
Signed-off-by: Bartlomiej Zolnierkiewicz

mach64: optimize wait_for_fifo

2018-10-08T10:57:35+00:00

This is a simple optimization for fifo waiting that improves scrolling
performance by 5%. If the queue has more free entries that what we
consume, we can skip the costly register read next time.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Ville Syrjälä 
Signed-off-by: Bartlomiej Zolnierkiewicz

mach64: fix image corruption due to reading accelerator registers

2018-10-08T10:57:35+00:00

Reading the registers without waiting for engine idle returns
unpredictable values. These unpredictable values result in display
corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the
bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would
never ever clear the bit, resulting in display corruption.

We don't want to wait for idle because it would degrade performance, so
this patch modifies the driver so that it never reads accelerator
registers.

HOST_CNTL doesn't have to be read, we can just write it with
HOST_BYTE_ALIGN because no other part of the driver cares if
HOST_BYTE_ALIGN is set.

DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect
with the default value and in atyfb_imageblit with the value set according
to the source image data.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Ville Syrjälä 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz

mach64: fix display corruption on big endian machines

2018-10-08T10:57:34+00:00

The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".

The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Ville Syrjälä 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz

mach64: detect the dot clock divider correctly on sparc

2018-10-08T10:57:34+00:00

On Sun Ultra 5, it happens that the dot clock is not set up properly for
some videomodes. For example, if we set the videomode "r1024x768x60" in
the firmware, Linux would incorrectly set a videomode with refresh rate
180Hz when booting (suprisingly, my LCD monitor can display it, although
display quality is very low).

The reason is this: Older mach64 cards set the divider in the register
VCLK_POST_DIV. The register has four 2-bit fields (the field that is
actually used is specified in the lowest two bits of the register
CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards,
there's another bit added - the top four bits of PLL_EXT_CNTL extend the
divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12".
The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets
them, so it can work regardless if the card supports them. However, the
sparc64 firmware may set these extended dividers during boot - and the
mach64 driver detects incorrect dot clock in this case.

This patch makes the driver read the additional divider bit from
PLL_EXT_CNTL and calculate the initial refresh rate properly.

Signed-off-by: Mikulas Patocka 
Acked-by: David S. Miller 
Reviewed-by: Ville Syrjälä 
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz

video: fbdev: aty: radeon_pm: Replace mdelay with msleep in radeonfb_pci_suspend

2018-04-24T16:11:21+00:00

radeonfb_pci_suspend() is never called in atomic context.

radeonfb_pci_suspend() is only set as ".suspend" in struct pci_driver.
This function is not called in atomic context.

Despite never getting called from atomic context, radeonfb_pci_suspend()
calls mdelay() to busily wait.
This is not necessary and can be replaced with msleep() 
and usleep_range() to avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Bartlomiej Zolnierkiewicz

video: fbdev: aty: aty128fb: Replace mdelay with msleep in aty128_set_suspend

2018-04-24T16:11:21+00:00

aty128_set_suspend() is never called in atomic context.

The call chains ending up at aty128_set_suspend() are:
[1] aty128_set_suspend() <- aty128_pci_suspend()
[2] aty128_set_suspend() <- aty128_do_resume() <- aty128_pci_resume()
[3] aty128_set_suspend() <- aty128_do_resume() <- aty128_early_resume()

aty128_pci_suspend() is set as ".suspend" in struct pci_driver.
aty128_pci_resume() is set as ".resume" in struct pci_driver.
aty128_early_resume() is never called.
These functions are not called in atomic context.

Despite never getting called from atomic context, aty128_set_suspend()
calls mdelay() to busily wait.
This is not necessary and can be replaced with msleep() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai 
Cc: Paul Mackerras 
Signed-off-by: Bartlomiej Zolnierkiewicz