linux-stable.git/drivers/video/fbdev/amba-clcd.c, branch linux-4.6.y

video: ARM CLCD: runtime check for Versatile

2016-04-18T09:08:43+00:00

The current compile-time check for inversed IENB/CNTL does not
work in multiplatform boots: as soon as versatile is included
in the build, the IENB/CNTL is switched and breaks graphics.
Convert this to a runtime switch.

Cc: stable@vger.kernel.org
Cc: Rob Herring 
Cc: Russell King 
Fixes: a29da136de34 ("ARM: versatile: convert to multi-platform")
Signed-off-by: Linus Walleij 
Signed-off-by: Tomi Valkeinen

dma, mm/pat: Rename dma__writecombine() to dma__wc()

2016-03-09T13:57:51+00:00

Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.

Build tested successfully with allmodconfig.

The following Coccinelle SmPL patch was used for this simple
transformation:

@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@

-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)

@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@

-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)

@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@

-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)

We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.

Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar 
Signed-off-by: Luis R. Rodriguez 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar

video: ARM CLCD: Add missing error check for devm_kzalloc

2015-02-26T08:23:15+00:00

This patch add a missing check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.

Signed-off-by: Kiran Padwal 
Signed-off-by: Tomi Valkeinen

video: ARM CLCD: Remove duplicated include in amba-clcd.c

2014-11-19T12:50:26+00:00

This patch fixes duplicated include dma-mapping.h in
drivers/video/fbdev/amba-clcd.c

Signed-off-by: Qiang Chen 
Acked-by: Pawel Moll 
Signed-off-by: Tomi Valkeinen

video: ARM CLCD: Fix color model capabilities for DT platforms

2014-09-12T08:45:10+00:00

The DT-based panel capabilities selection was picking up
a subset of available modes based on hardware configuration.
This was wrong, as the capabilities describe available
memory models and adapt the display controller to them
that the RGB output is wired up correctly (as in: R and
B components are not swapped).

This patch fixes it by removing the unnecessary limitation.

Signed-off-by: Pawel Moll 
Signed-off-by: Tomi Valkeinen

video: ARM CLCD: Fix calculation of bits-per-pixel

2014-08-26T09:50:27+00:00

If the device-tree specifies a max-memory-bandwidth property then the
CLCD driver uses that to calculate the bits-per-pixel supported,
however, this calculation is faulty for two reasons.

1. It doesn't ensure that the result is a sane value, i.e. a power of 2
   and <= 32 as the rest of the code assumes.

2. It uses the displayed resolution and calculates the average bandwidth
   across the whole frame. It should instead calculate the peak
   bandwidth based on the pixel clock.

This patch fixes both the above.

Signed-off-by: Jon Medhurst 
Acked-by: Pawel Moll 
Signed-off-by: Tomi Valkeinen

video: ARM CLCD: Fix DT-related build problems

2014-08-04T06:31:35+00:00

This patch fixes the following error when !CONFIG_OF:

drivers/video/fbdev/amba-clcd.c:800:54: warning: ‘struct amba_dev’ declared inside parameter list [enabled by default]
 static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev)
                                                      ^
and adds a missing Kconfig select causing this
when CONFIG_OF && !CONFIG_FB_MODE_HELPERS:

drivers/video/fbdev/amba-clcd.c:567: undefined reference to `fb_videomode_from_videomode'

Reported-by: Fengguang Wu 
Signed-off-by: Pawel Moll 
Signed-off-by: Tomi Valkeinen

video: ARM CLCD: Add DT support

2014-07-29T11:12:12+00:00

This patch adds basic DT bindings for the PL11x CLCD cells
and make their fbdev driver use them.

Signed-off-by: Pawel Moll 
Signed-off-by: Tomi Valkeinen

video: move fbdev to drivers/video/fbdev

2014-04-17T05:10:19+00:00

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen 
Acked-by: Laurent Pinchart 
Acked-by: Geert Uytterhoeven 
Acked-by: Rob Clark 
Acked-by: Jingoo Han 
Acked-by: Daniel Vetter