linux-stable.git/drivers/usb, branch v6.9.2 Linux kernel stable tree usb: typec: tipd: fix event checking for tps6598x 2024-05-25T14:30:55+00:00 Javier Carrasco javier.carrasco@wolfvision.net 2024-04-29T13:35:58+00:00 d88a0e57ace5776bdff10968c9c1386c23f4d5c4 commit 409c1cfb5a803f3cf2d17aeaf75c25c4be951b07 upstream. The current interrupt service routine of the tps6598x only reads the first 64 bits of the INT_EVENT1 and INT_EVENT2 registers, which means that any event above that range will be ignored, leaving interrupts unattended. Moreover, those events will not be cleared, and the device will keep the interrupt enabled. This issue has been observed while attempting to load patches, and the 'ReadyForPatch' field (bit 81) of INT_EVENT1 was set. Given that older versions of the tps6598x (1, 2 and 6) provide 8-byte registers, a mechanism based on the upper byte of the version register (0x0F) has been included. The manufacturer has confirmed [1] that this byte is always 0 for older versions, and either 0xF7 (DH parts) or 0xF9 (DK parts) is returned in newer versions (7 and 8). Read the complete INT_EVENT registers to handle all interrupts generated by the device and account for the hardware version to select the register size. Link: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1346521/tps65987d-register-command-to-distinguish-between-tps6591-2-6-and-tps65987-8 [1] Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-2-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 409c1cfb5a803f3cf2d17aeaf75c25c4be951b07 upstream.

The current interrupt service routine of the tps6598x only reads the
first 64 bits of the INT_EVENT1 and INT_EVENT2 registers, which means
that any event above that range will be ignored, leaving interrupts
unattended. Moreover, those events will not be cleared, and the device
will keep the interrupt enabled.

This issue has been observed while attempting to load patches, and the
'ReadyForPatch' field (bit 81) of INT_EVENT1 was set.

Given that older versions of the tps6598x (1, 2 and 6) provide 8-byte
registers, a mechanism based on the upper byte of the version register
(0x0F) has been included. The manufacturer has confirmed [1] that this
byte is always 0 for older versions, and either 0xF7 (DH parts) or 0xF9
(DK parts) is returned in newer versions (7 and 8).

Read the complete INT_EVENT registers to handle all interrupts generated
by the device and account for the hardware version to select the
register size.

Link: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1346521/tps65987d-register-command-to-distinguish-between-tps6591-2-6-and-tps65987-8 [1]
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-2-4e8e58dce489@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: fix event checking for tps25750 2024-05-25T14:30:55+00:00 Javier Carrasco javier.carrasco@wolfvision.net 2024-04-29T13:35:57+00:00 0db68ec4a2e28bbaec8e4a0445ca1ba4ac557fcb commit d64adb0f41e62f91fcfdf0e0d9d5bfa714db0d23 upstream. In its current form, the interrupt service routine of the tps25750 checks the event flags in the lowest 64 bits of the interrupt event register (event[0]), but also in the upper part (event[1]). Given that all flags are defined as BIT() or BIT_ULL(), they are restricted to the first 64 bits of the INT_EVENT1 register. Including the upper part of the register can lead to false positives e.g. if the event 64 bits above the one being checked is set, but the one being checked is not. Restrict the flag checking to the first 64 bits of the INT_EVENT1 register. Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d64adb0f41e62f91fcfdf0e0d9d5bfa714db0d23 upstream.

In its current form, the interrupt service routine of the tps25750
checks the event flags in the lowest 64 bits of the interrupt event
register (event[0]), but also in the upper part (event[1]).

Given that all flags are defined as BIT() or BIT_ULL(), they are
restricted to the first 64 bits of the INT_EVENT1 register. Including
the upper part of the register can lead to false positives e.g. if the
event 64 bits above the one being checked is set, but the one being
checked is not.

Restrict the flag checking to the first 64 bits of the INT_EVENT1
register.

Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: displayport: Fix potential deadlock 2024-05-25T14:30:55+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2024-05-07T13:43:16+00:00 b9828fd1bd2ace6fc947c2bba16f452501f761ba commit b791a67f68121d69108640d4a3e591d210ffe850 upstream. The function ucsi_displayport_work() does not access the connector, so it also must not acquire the connector lock. This fixes a potential deadlock scenario: ucsi_displayport_work() -> lock(&con->lock) typec_altmode_vdm() dp_altmode_vdm() dp_altmode_work() typec_altmode_enter() ucsi_displayport_enter() -> lock(&con->lock) Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b791a67f68121d69108640d4a3e591d210ffe850 upstream.

The function ucsi_displayport_work() does not access the
connector, so it also must not acquire the connector lock.

This fixes a potential deadlock scenario:

ucsi_displayport_work() -> lock(&con->lock)
typec_altmode_vdm()
dp_altmode_vdm()
dp_altmode_work()
typec_altmode_enter()
ucsi_displayport_enter() -> lock(&con->lock)

Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: Wait unconditionally after issuing EndXfer command 2024-05-25T14:30:54+00:00 Prashanth K quic_prashk@quicinc.com 2024-05-02T04:41:03+00:00 1ba145f05b5c8f0b1a947a0633b5edff5dd1f1c5 commit 1d26ba0944d398f88aaf997bda3544646cf21945 upstream. Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. Cc: stable@vger.kernel.org Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1d26ba0944d398f88aaf997bda3544646cf21945 upstream.

Currently all controller IP/revisions except DWC3_usb3 >= 310a
wait 1ms unconditionally for ENDXFER completion when IOC is not
set. This is because DWC_usb3 controller revisions >= 3.10a
supports GUCTL2[14: Rst_actbitlater] bit which allows polling
CMDACT bit to know whether ENDXFER command is completed.

Consider a case where an IN request was queued, and parallelly
soft_disconnect was called (due to ffs_epfile_release). This
eventually calls stop_active_transfer with IOC cleared, hence
send_gadget_ep_cmd() skips waiting for CMDACT cleared during
EndXfer. For DWC3 controllers with revisions >= 310a, we don't
forcefully wait for 1ms either, and we proceed by unmapping the
requests. If ENDXFER didn't complete by this time, it leads to
SMMU faults since the controller would still be accessing those
requests.

Fix this by ensuring ENDXFER completion by adding 1ms delay in
__dwc3_stop_active_transfer() unconditionally.

Cc: stable@vger.kernel.org
Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: Check for port partner validity before consuming it 2024-04-30T17:44:45+00:00 Badhri Jagan Sridharan badhri@google.com 2024-04-27T20:28:12+00:00 ae11f04b452b5205536e1c02d31f8045eba249dd typec_register_partner() does not guarantee partner registration to always succeed. In the event of failure, port->partner is set to the error value or NULL. Given that port->partner validity is not checked, this results in the following crash: Unable to handle kernel NULL pointer dereference at virtual address xx pc : run_state_machine+0x1bc8/0x1c08 lr : run_state_machine+0x1b90/0x1c08 .. Call trace: run_state_machine+0x1bc8/0x1c08 tcpm_state_machine_work+0x94/0xe4 kthread_worker_fn+0x118/0x328 kthread+0x1d0/0x23c ret_from_fork+0x10/0x20 To prevent the crash, check for port->partner validity before derefencing it in all the call sites. Cc: stable@vger.kernel.org Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:

Unable to handle kernel NULL pointer dereference at virtual address xx
 pc : run_state_machine+0x1bc8/0x1c08
 lr : run_state_machine+0x1b90/0x1c08
..
 Call trace:
   run_state_machine+0x1bc8/0x1c08
   tcpm_state_machine_work+0x94/0xe4
   kthread_worker_fn+0x118/0x328
   kthread+0x1d0/0x23c
   ret_from_fork+0x10/0x20

To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.

Cc: stable@vger.kernel.org
Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: enforce ready state when queueing alt mode vdm 2024-04-30T17:44:36+00:00 RD Babiera rdbabiera@google.com 2024-04-23T20:23:57+00:00 cdc9946ea6377e8e214b135ccc308c5e514ba25f Before sending Enter Mode for an Alt Mode, there is a gap between Discover Modes and the Alt Mode driver queueing the Enter Mode VDM for the port partner to send a message to the port. If this message results in unregistering Alt Modes such as in a DR_SWAP, then the following deadlock can occur with respect to the DisplayPort Alt Mode driver: 1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver results in a cancel_work_sync() that waits for the current dp_altmode_work to finish. 2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs because tcpm_queue_vdm_unlock attempts to hold port->lock. Before attempting to grab the lock, ensure that the port is in a state vdm_run_state_machine can run in. Alt Mode unregistration will not occur in these states. Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Before sending Enter Mode for an Alt Mode, there is a gap between Discover
Modes and the Alt Mode driver queueing the Enter Mode VDM for the port
partner to send a message to the port.

If this message results in unregistering Alt Modes such as in a DR_SWAP,
then the following deadlock can occur with respect to the DisplayPort Alt
Mode driver:
1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver
results in a cancel_work_sync() that waits for the current dp_altmode_work
to finish.
2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs
because tcpm_queue_vdm_unlock attempts to hold port->lock.

Before attempting to grab the lock, ensure that the port is in a state
vdm_run_state_machine can run in. Alt Mode unregistration will not occur
in these states.

Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: unregister existing source caps before re-registration 2024-04-30T17:44:15+00:00 Amit Sunil Dhamne amitsd@google.com 2024-04-24T22:32:16+00:00 230ecdf71a644c9c73e0e6735b33173074ae3f94 Check and unregister existing source caps in tcpm_register_source_caps function before registering new ones. This change fixes following warning when port partner resends source caps after negotiating PD contract for the purpose of re-negotiation. [ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' [ 343.135071][ T151] Call trace: [ 343.135076][ T151] dump_backtrace+0xe8/0x108 [ 343.135099][ T151] show_stack+0x18/0x24 [ 343.135106][ T151] dump_stack_lvl+0x50/0x6c [ 343.135119][ T151] dump_stack+0x18/0x24 [ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140 [ 343.135137][ T151] kobject_add_internal+0x228/0x424 [ 343.135146][ T151] kobject_add+0x94/0x10c [ 343.135152][ T151] device_add+0x1b0/0x4c0 [ 343.135187][ T151] device_register+0x20/0x34 [ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c [ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8 [ 343.135216][ T151] kthread_worker_fn+0x11c/0x260 [ 343.135227][ T151] kthread+0x114/0x1bc [ 343.135235][ T151] ret_from_fork+0x10/0x20 [ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Check and unregister existing source caps in tcpm_register_source_caps
function before registering new ones. This change fixes following
warning when port partner resends source caps after negotiating PD contract
for the purpose of re-negotiation.

[  343.135030][  T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities'
[  343.135071][  T151] Call trace:
[  343.135076][  T151]  dump_backtrace+0xe8/0x108
[  343.135099][  T151]  show_stack+0x18/0x24
[  343.135106][  T151]  dump_stack_lvl+0x50/0x6c
[  343.135119][  T151]  dump_stack+0x18/0x24
[  343.135126][  T151]  sysfs_create_dir_ns+0xe0/0x140
[  343.135137][  T151]  kobject_add_internal+0x228/0x424
[  343.135146][  T151]  kobject_add+0x94/0x10c
[  343.135152][  T151]  device_add+0x1b0/0x4c0
[  343.135187][  T151]  device_register+0x20/0x34
[  343.135195][  T151]  usb_power_delivery_register_capabilities+0x90/0x20c
[  343.135209][  T151]  tcpm_pd_rx_handler+0x9f0/0x15b8
[  343.135216][  T151]  kthread_worker_fn+0x11c/0x260
[  343.135227][  T151]  kthread+0x114/0x1bc
[  343.135235][  T151]  ret_from_fork+0x10/0x20
[  343.135265][  T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory.

Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: clear pd_event queue in PORT_RESET 2024-04-30T17:43:54+00:00 RD Babiera rdbabiera@google.com 2024-04-23T20:27:16+00:00 bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf When a Fast Role Swap control message attempt results in a transition to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event. If the event is queued but processed after the tcpm_reset_port() call in the PORT_RESET state, then the following occurs: 1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and sinking state 2. tcpm_pd_event_handler() turns VBUS on before the port is in the default state. 3. The port resolves as a sink. In the SNK_DISCOVERY state, tcpm_set_charge() cannot set vbus to charge. Clear pd events within PORT_RESET to get rid of non-applicable events. Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.

If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.

Clear pd events within PORT_RESET to get rid of non-applicable events.

Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked 2024-04-30T17:43:47+00:00 RD Babiera rdbabiera@google.com 2024-04-23T20:25:46+00:00 edc5a009ee3bdc2161e2c3e782a37805617790a3 tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input parameter tx_sop_type. Fix tcpm_queue_vdm() call. Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input
parameter tx_sop_type. Fix tcpm_queue_vdm() call.

Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device 2024-04-30T16:05:27+00:00 Alan Stern stern@rowland.harvard.edu 2024-04-30T14:33:48+00:00 c78c3644b772e356ca452ae733a3c4de0fb11dc8 A virtual SuperSpeed device in the FreeBSD BVCP package (https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256. It stopped working with Linux following a recent commit because now we check these sizes more carefully than before. Fix this regression by using the bMaxpacketSize0 value in the device descriptor for SuperSpeed or faster devices, even if it is invalid. This is a very simple-minded change; we might want to check more carefully for values that actually make some sense (for instance, no smaller than 64). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569 Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/ Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.

Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid.  This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569
Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/
Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>