linux-stable.git/drivers/usb, branch v6.6.67 Linux kernel stable tree usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode 2024-12-19T17:11:24+00:00 Neal Frager neal.frager@amd.com 2024-12-02T18:11:51+00:00 c0484aa1adc366add73c8e2e293b910eda5c39d3 commit a48f744bef9ee74814a9eccb030b02223e48c76c upstream. When the USB3 PHY is not defined in the Linux device tree, there could still be a case where there is a USB3 PHY active on the board and enabled by the first stage bootloader. If serdes clock is being used then the USB will fail to enumerate devices in 2.0 only mode. To solve this, make sure that the PIPE clock is deselected whenever the USB3 PHY is not defined and guarantees that the USB2 only mode will work in all cases. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: stable@vger.kernel.org Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/1733163111-1414816-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a48f744bef9ee74814a9eccb030b02223e48c76c upstream.

When the USB3 PHY is not defined in the Linux device tree, there could
still be a case where there is a USB3 PHY active on the board and enabled
by the first stage bootloader. If serdes clock is being used then the USB
will fail to enumerate devices in 2.0 only mode.

To solve this, make sure that the PIPE clock is deselected whenever the
USB3 PHY is not defined and guarantees that the USB2 only mode will work
in all cases.

Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode")
Cc: stable@vger.kernel.org
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/1733163111-1414816-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer 2024-12-19T17:11:24+00:00 Lianqin Hu hulianqin@vivo.com 2024-12-03T12:14:16+00:00 8ca07a3d18f39b1669927ef536e485787e856df6 commit 4cfbca86f6a8b801f3254e0e3c8f2b1d2d64be2b upstream. Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable@vger.kernel.org Suggested-by: Prashanth K <quic_prashk@quicinc.com> Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Acked-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4cfbca86f6a8b801f3254e0e3c8f2b1d2d64be2b upstream.

Considering that in some extreme cases,
when u_serial driver is accessed by multiple threads,
Thread A is executing the open operation and calling the gs_open,
Thread B is executing the disconnect operation and calling the
gserial_disconnect function,The port->port_usb pointer will be set to NULL.

E.g.
    Thread A                                 Thread B
    gs_open()                                gadget_unbind_driver()
    gs_start_io()                            composite_disconnect()
    gs_start_rx()                            gserial_disconnect()
    ...                                      ...
    spin_unlock(&port->port_lock)
    status = usb_ep_queue()                  spin_lock(&port->port_lock)
    spin_lock(&port->port_lock)              port->port_usb = NULL
    gs_free_requests(port->port_usb->in)     spin_unlock(&port->port_lock)
    Crash

This causes thread A to access a null pointer (port->port_usb is null)
when calling the gs_free_requests function, causing a crash.

If port_usb is NULL, the release request will be skipped as it
will be done by gserial_disconnect.

So add a null pointer check to gs_start_io before attempting
to access the value of the pointer port->port_usb.

Call trace:
 gs_start_io+0x164/0x25c
 gs_open+0x108/0x13c
 tty_open+0x314/0x638
 chrdev_open+0x1b8/0x258
 do_dentry_open+0x2c4/0x700
 vfs_open+0x2c/0x3c
 path_openat+0xa64/0xc60
 do_filp_open+0xb8/0x164
 do_sys_openat2+0x84/0xf0
 __arm64_sys_openat+0x70/0x9c
 invoke_syscall+0x58/0x114
 el0_svc_common+0x80/0xe0
 do_el0_svc+0x1c/0x28
 el0_svc+0x38/0x68

Fixes: c1dca562be8a ("usb gadget: split out serial core")
Cc: stable@vger.kernel.org
Suggested-by: Prashanth K <quic_prashk@quicinc.com>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Acked-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe() 2024-12-19T17:11:23+00:00 Joe Hattori joe@pf.is.s.u-tokyo.ac.jp 2024-11-26T01:49:09+00:00 bd8ca5c5a04a4a8f54eefd491cad28abd6a2c523 commit ef42b906df5c57d0719b69419df9dfd25f25c161 upstream. The refcounts of the OF nodes obtained by of_get_child_by_name() calls in anx7411_typec_switch_probe() are not decremented. Replace them with device_get_named_child_node() calls and store the return values to the newly created fwnode_handle fields in anx7411_data, and call fwnode_handle_put() on them in the error path and in the unregister functions. Fixes: e45d7337dc0e ("usb: typec: anx7411: Use of_get_child_by_name() instead of of_find_node_by_name()") Cc: stable@vger.kernel.org Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20241126014909.3687917-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ef42b906df5c57d0719b69419df9dfd25f25c161 upstream.

The refcounts of the OF nodes obtained by of_get_child_by_name() calls
in anx7411_typec_switch_probe() are not decremented. Replace them with
device_get_named_child_node() calls and store the return values to the
newly created fwnode_handle fields in anx7411_data, and call
fwnode_handle_put() on them in the error path and in the unregister
functions.

Fixes: e45d7337dc0e ("usb: typec: anx7411: Use of_get_child_by_name() instead of of_find_node_by_name()")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241126014909.3687917-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: anx7411: fix fwnode_handle reference leak 2024-12-19T17:11:23+00:00 Joe Hattori joe@pf.is.s.u-tokyo.ac.jp 2024-11-21T02:34:29+00:00 1c766533deb358b95c07091f0a4ca4fb6c094b16 commit 645d56e4cc74e953284809d096532c1955918a28 upstream. An fwnode_handle and usb_role_switch are obtained with an incremented refcount in anx7411_typec_port_probe(), however the refcounts are not decremented in the error path. The fwnode_handle is also not decremented in the .remove() function. Therefore, call fwnode_handle_put() and usb_role_switch_put() accordingly. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Cc: stable@vger.kernel.org Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20241121023429.962848-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 645d56e4cc74e953284809d096532c1955918a28 upstream.

An fwnode_handle and usb_role_switch are obtained with an incremented
refcount in anx7411_typec_port_probe(), however the refcounts are not
decremented in the error path. The fwnode_handle is also not decremented
in the .remove() function. Therefore, call fwnode_handle_put() and
usb_role_switch_put() accordingly.

Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20241121023429.962848-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci-hcd: fix call balance of clocks handling routines 2024-12-19T17:11:23+00:00 Vitalii Mordan mordan@ispras.ru 2024-11-21T11:47:00+00:00 e22e4df241f76b066dff4ba4eb9f91fd502c3089 commit 97264eaaba0122a5b7e8ddd7bf4ff3ac57c2b170 upstream. If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe, they should not be disabled in any path. Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.") Cc: stable@vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20241121114700.2100520-1-mordan@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97264eaaba0122a5b7e8ddd7bf4ff3ac57c2b170 upstream.

If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe,
they should not be disabled in any path.

Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled
in all error paths to ensure proper cleanup.

Found by Linux Verification Center (linuxtesting.org) with Klever.

Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.")
Cc: stable@vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241121114700.2100520-1-mordan@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: midi2: Fix interpretation of is_midi1 bits 2024-12-19T17:11:23+00:00 Takashi Iwai tiwai@suse.de 2024-11-27T07:02:11+00:00 35acf6d7e88995cf1d5ac907511e9b45945e9150 commit 82937056967da052cbc04b4435c13db84192dc52 upstream. The UMP Function Block info m1.0 field (represented by is_midi1 sysfs entry) is an enumeration from 0 to 2, while the midi2 gadget driver incorrectly copies it to the corresponding snd_ump_block_info.flags bits as-is. This made the wrong bit flags set when m1.0 = 2. This patch corrects the wrong interpretation of is_midi1 bits. Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 82937056967da052cbc04b4435c13db84192dc52 upstream.

The UMP Function Block info m1.0 field (represented by is_midi1 sysfs
entry) is an enumeration from 0 to 2, while the midi2 gadget driver
incorrectly copies it to the corresponding snd_ump_block_info.flags
bits as-is.  This made the wrong bit flags set when m1.0 = 2.

This patch corrects the wrong interpretation of is_midi1 bits.

Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: Fix HCD port connection race 2024-12-19T17:11:23+00:00 Stefan Wahren wahrenst@gmx.net 2024-12-02T00:16:31+00:00 6c75336869c7e440d020cef4f1276d6ce73ae7e5 commit 1cf1bd88f129f3bd647fead4dca270a5894274bb upstream. On Raspberry Pis without onboard USB hub frequent device reconnects can trigger a interrupt storm after DWC2 entered host clock gating. This is caused by a race between _dwc2_hcd_suspend() and the port interrupt, which sets port_connect_status. The issue occurs if port_connect_status is still 1, but there is no connection anymore: usb 1-1: USB disconnect, device number 25 dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1 dwc2 3f980000.usb: Entering host clock gating. Disabling IRQ #66 irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty #322 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1d01f20 to 0xc1d01f68) 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<e3a25c00>] dwc2_handle_common_intr [<58bf98a3>] usb_hcd_irq Disabling IRQ #66 So avoid this by reading the connection status directly. Fixes: 113f86d0c302 ("usb: dwc2: Update partial power down entering by system suspend") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20241202001631.75473-4-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1cf1bd88f129f3bd647fead4dca270a5894274bb upstream.

On Raspberry Pis without onboard USB hub frequent device reconnects
can trigger a interrupt storm after DWC2 entered host clock gating.
This is caused by a race between _dwc2_hcd_suspend() and the port
interrupt, which sets port_connect_status. The issue occurs if
port_connect_status is still 1, but there is no connection anymore:

usb 1-1: USB disconnect, device number 25
dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1
dwc2 3f980000.usb: Entering host clock gating.
Disabling IRQ #66
irq 66: nobody cared (try booting with the "irqpoll" option)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty #322
Hardware name: BCM2835
Call trace:
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x50/0x64
 dump_stack_lvl from __report_bad_irq+0x38/0xc0
 __report_bad_irq from note_interrupt+0x2ac/0x2f4
 note_interrupt from handle_irq_event+0x88/0x8c
 handle_irq_event from handle_level_irq+0xb4/0x1ac
 handle_level_irq from generic_handle_domain_irq+0x24/0x34
 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28
 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34
 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44
 generic_handle_arch_irq from __irq_svc+0x88/0xb0
 Exception stack(0xc1d01f20 to 0xc1d01f68)
 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8
 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40
 1f60: 60000013 ffffffff
 __irq_svc from default_idle_call+0x1c/0xb0
 default_idle_call from do_idle+0x21c/0x284
 do_idle from cpu_startup_entry+0x28/0x2c
 cpu_startup_entry from kernel_init+0x0/0x12c
handlers:
 [<e3a25c00>] dwc2_handle_common_intr
 [<58bf98a3>] usb_hcd_irq
Disabling IRQ #66

So avoid this by reading the connection status directly.

Fixes: 113f86d0c302 ("usb: dwc2: Update partial power down entering by system suspend")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241202001631.75473-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature 2024-12-19T17:11:22+00:00 Stefan Wahren wahrenst@gmx.net 2024-12-02T00:16:30+00:00 700f3afe5b7641b744d10c61f5feeda9a875aef2 commit a8d3e4a734599c7d0f6735f8db8a812e503395dd upstream. On Rasperry Pis without onboard USB hub the power cycle during power connect init only disable the port but never enabled it again: usb usb1-port1: attempt power cycle The port relevant part in dwc2_hcd_hub_control() is skipped in case port_connect_status = 0 under the assumption the core is or will be soon in device mode. But this assumption is wrong, because after ClearPortFeature USB_PORT_FEAT_POWER the port_connect_status will also be 0 and SetPortFeature (incl. USB_PORT_FEAT_POWER) will be a no-op. Fix the behavior of dwc2_hcd_hub_control() by replacing the port_connect_status check with dwc2_is_device_mode(). Link: https://github.com/raspberrypi/linux/issues/6247 Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20241202001631.75473-3-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a8d3e4a734599c7d0f6735f8db8a812e503395dd upstream.

On Rasperry Pis without onboard USB hub the power cycle during
power connect init only disable the port but never enabled it again:

  usb usb1-port1: attempt power cycle

The port relevant part in dwc2_hcd_hub_control() is skipped in case
port_connect_status = 0 under the assumption the core is or will be soon
in device mode. But this assumption is wrong, because after ClearPortFeature
USB_PORT_FEAT_POWER the port_connect_status will also be 0 and
SetPortFeature (incl. USB_PORT_FEAT_POWER) will be a no-op.

Fix the behavior of dwc2_hcd_hub_control() by replacing the
port_connect_status check with dwc2_is_device_mode().

Link: https://github.com/raspberrypi/linux/issues/6247
Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241202001631.75473-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: Fix HCD resume 2024-12-19T17:11:22+00:00 Stefan Wahren wahrenst@gmx.net 2024-12-02T00:16:29+00:00 09883478938d9785389da5ff2489b9fa2ef8f2d3 commit 336f72d3cbf5cc17df2947bbbd2ba6e2509f17e8 upstream. The Raspberry Pi can suffer on interrupt storms on HCD resume. The dwc2 driver sometimes misses to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling the interrupts. This causes a situation where both handler ignore a incoming port interrupt and force the upper layers to disable the dwc2 interrupt line. This leaves the USB interface in a unusable state: irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.10.0-rc3 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1b01f20 to 0xc1b01f68) 1f20: 0005c0d4 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8 1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<f539e0f4>] dwc2_handle_common_intr [<75cd278b>] usb_hcd_irq Disabling IRQ #66 So enable the HCD_FLAG_HW_ACCESSIBLE flag in case there is a port connection. Fixes: c74c26f6e398 ("usb: dwc2: Fix partial power down exiting by system resume") Closes: https://lore.kernel.org/linux-usb/3fd0c2fb-4752-45b3-94eb-42352703e1fd@gmx.net/T/ Link: https://lore.kernel.org/all/5e8cbce0-3260-2971-484f-fc73a3b2bd28@synopsys.com/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20241202001631.75473-2-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 336f72d3cbf5cc17df2947bbbd2ba6e2509f17e8 upstream.

The Raspberry Pi can suffer on interrupt storms on HCD resume. The dwc2
driver sometimes misses to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling
the interrupts. This causes a situation where both handler ignore a incoming
port interrupt and force the upper layers to disable the dwc2 interrupt
line. This leaves the USB interface in a unusable state:

irq 66: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W          6.10.0-rc3
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x50/0x64
dump_stack_lvl from __report_bad_irq+0x38/0xc0
__report_bad_irq from note_interrupt+0x2ac/0x2f4
note_interrupt from handle_irq_event+0x88/0x8c
handle_irq_event from handle_level_irq+0xb4/0x1ac
handle_level_irq from generic_handle_domain_irq+0x24/0x34
generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28
bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34
generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44
generic_handle_arch_irq from __irq_svc+0x88/0xb0
Exception stack(0xc1b01f20 to 0xc1b01f68)
1f20: 0005c0d4 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8
1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160
1f60: 60000013 ffffffff
__irq_svc from default_idle_call+0x1c/0xb0
default_idle_call from do_idle+0x21c/0x284
do_idle from cpu_startup_entry+0x28/0x2c
cpu_startup_entry from kernel_init+0x0/0x12c
handlers:
[<f539e0f4>] dwc2_handle_common_intr
[<75cd278b>] usb_hcd_irq
Disabling IRQ #66

So enable the HCD_FLAG_HW_ACCESSIBLE flag in case there is a port
connection.

Fixes: c74c26f6e398 ("usb: dwc2: Fix partial power down exiting by system resume")
Closes: https://lore.kernel.org/linux-usb/3fd0c2fb-4752-45b3-94eb-42352703e1fd@gmx.net/T/
Link: https://lore.kernel.org/all/5e8cbce0-3260-2971-484f-fc73a3b2bd28@synopsys.com/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241202001631.75473-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: max3421-hcd: Correctly abort a USB request. 2024-12-19T17:11:22+00:00 Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz 2024-11-24T22:14:30+00:00 a867bf10364a597df23ba0b71872211cfb6208ef commit 0d2ada05227881f3d0722ca2364e3f7a860a301f upstream. If the current USB request was aborted, the spi thread would not respond to any further requests. This is because the "curr_urb" pointer would not become NULL, so no further requests would be taken off the queue. The solution here is to set the "urb_done" flag, as this will cause the correct handling of the URB. Also clear interrupts that should only be expected if an URB is in progress. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20241124221430.1106080-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0d2ada05227881f3d0722ca2364e3f7a860a301f upstream.

If the current USB request was aborted, the spi thread would not respond
to any further requests. This is because the "curr_urb" pointer would
not become NULL, so no further requests would be taken off the queue.
The solution here is to set the "urb_done" flag, as this will cause the
correct handling of the URB. Also clear interrupts that should only be
expected if an URB is in progress.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20241124221430.1106080-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>